Skip to content

Draft, not yet released. In stewardship review. Not indexed until the first approved release.

Exponential Technology Report 2026: Additive and Advanced Manufacturing

The first annual edition of the additive manufacturing report. It fixes the 2026 reference state of additive and advanced manufacturing as infrastructure, and the model, voice and positions, against which the 2027 edition will be read.

Editor
Saeed Valadbaygi
Desk
GCRI Systems Evidence
Publisher of record
GCRI for the Nexus Consortium
Evidence close
30 September 2026
સ્થિતિ
Draft in stewardship review; not yet released
Additive and Advanced Manufacturing 2026
Findings12each with its status and source
Sources42numbered, editor first
Chapters and annexes11plus the executive summary
Indicators16in the data appendix, with CSV and JSON

01 · Status

Status and boundaries.

This edition governs nothing and certifies nothing. It records where the global evidence stood at the 2026 baseline. Every value resolves to its source or to its stated method; where neither exists, the edition says so instead of filling the gap.

Publication ID
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Series alias
NR-XTC-XT-13-2026-BL
Identifier status
Series alias and evidence cut are provisional until the owner confirms them. No UNI is minted.
Family · class
Exponential Technology Report XT-13 · Baseline Edition (inaugural annual)
Lifecycle state
◌ DRAFT, review copy before stewardship review
Publication date
October 2026
Evidence close
30 September 2026 · cut DC-XTECH-MANUFACTURING-GLOBAL-2026-B0
Reproducibility
sourced values cited; analytical values reproducible from stated parameters
Access class
PUBLIC-SAFE DERIVATIVE
સમીક્ષા
five passes scheduled before release (in Annex C)
Designed for
strategic planning · technology-risk screening · industrial readiness discussion · research · public communication
Not for
government assessment · official warning · rating · certification · investment advice · underwriting · procurement · operational authorisation
રજિસ્ટ્રી
record NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE · current-version pointer at release
સુધારા
registry correction pathway · history in Annex C
Additive manufacturing use
disclosed in Annex C
Next edition
NR-XTECH-MANUFACTURING-GLOBAL-2027-v1.0.0 · 2027 annual
લાઇસન્સ
text CC BY 4.0 · data on the terms of each source
Desk identifier
NR-GCRI-XT-13-2026-BASELINE-v1.0.0
Collection
NR-COL-2026-BASELINE

02 · Key messages

What the edition finds.

Five of the questions the edition answers, each with its status. The executive summary has all of them, with their sources.

  1. About USD 24.2 billion in 2025, in a trade summary of a commercial report.

    How big is the market?Reported

  2. In services and materials; machine sales grew 3.6%; Asia-Pacific grew fastest.

    Where is growth?Reported

  3. Two listed makers reported lower 2025 revenue and one filed for Chapter 11.

    Are machine makers growing?Reported

  4. Yes for some parts: a 2018 jet engine part and Navy parts in 2026.

    Is it in production?Reported

  5. One polymer platform used about 114 MJ/kg; metal machines are not bound.

    What does it cost in energy?Reported

03 · Contents

Eight chapters and three annexes.

  1. ·

    Executive summary

    The edition on a few pages: the abstract, the key messages, the headline finding and what each steward reads in it.

  2. 1

    Chapter 1. Additive manufacturing is production infrastructure that is still being qualified

    Part I describes systems and their couplings.

  3. 2

    Chapter 2. Key findings

    Twelve findings carry the additive manufacturing baseline.

  4. 3

    Chapter 3. Systems and sectors at baseline

  5. 4

    Chapter 4. Risks and capability

    Four additive manufacturing risk objects open the portfolio.

  6. 5

    Chapter 5. Defence demand outruns part acceptance and supply

    A conditional statement under stated assumptions, never a prediction.

  7. 6

    Chapter 6. Readings from the other desks

    The additive manufacturing baseline is read through each steward’s lens, then once as a whole.

  8. 7

    Chapter 7. The 2027 agenda

    Eight bounded questions open the 2027 additive manufacturing agenda.

  9. 8

    Chapter 8. Systems in depth

    One section per system: its state at evidence close, its exposures and what the operational series will watch.

  10. A

    Annex A. Methodology

    How the edition was made: methods, the model card, the evidence cut and its age, the acceptance record and the glossary.

  11. B

    Annex B. Data appendix

    The indicator set with its sources, the source registers, the licences of every kind of material and the formats of the edition.

  12. C

    Annex C. References and record

    Every source the edition rests on, the publication record, the corrections log and the open record.

List of figures (4)
  1. S.1US Navy additive parts in a year
  2. 1.1How large is global additive manufacturing revenue? USD billion
  3. 1.2Couplings across the six sectors
  4. 2.1US Navy additive parts in a year
List of tables (45)
  1. 1.1Coupling matrix: from the row system to the column system
  2. 3.1Each domain read in words, not scored
  3. 3.2Sectors: baseline evidence and the exposure to watch
  4. 4.1Capabilities on the ladder of evidence: listed, exists, demonstrated, tested
  5. 6.1The quarterly rhythm every edition follows
  6. 6.2Who contributes what each quarter
  7. 6.32027 additive manufacturing readiness pack
  8. 6.4Standards and regulatory watch
  9. 6.5Peer-reviewed science and preprints
  10. 6.6Institutional and defence sources
  11. 6.7Standards, policy and controls
  12. 6.8Market, supply and workforce overviews
  13. 7.1Objects proposed for the first operational quarter
  14. 7.2Universe 2027: evidence pack for the additive manufacturing candidate mission
  15. 7.3Handoffs and routing
  16. 7.4Routing rules by publication class
  17. 7.5Feeds watched from 2027
  18. 7.6Signals at baseline
  19. 8.1State at baseline
  20. 8.2State at baseline
  21. 8.3State at baseline
  22. 8.4State at baseline
  23. 8.5State at baseline
  24. A.1પદ્ધતિઓ
  25. A.2Coupling strength scale (matrix and model card)
  26. A.3Status grammar
  27. A.4From the baseline cut to the federation cut
  28. A.5Evidence age and coverage
  29. A.6Coverage by system at baseline
  30. A.7Designed empty states: what is not bound, what would fill it and why
  31. A.8Quality dimensions at baseline
  32. A.9Publication acceptance record
  33. A.10The status every value carries
  34. A.11Series terms
  35. A.12Abbreviations used in this edition
  36. A.13Technical annex
  37. B.1Global baseline indicator set
  38. B.2Global baseline indicator set
  39. B.3Global source register
  40. B.4Regional reading, additive manufacturing across ten clusters
  41. B.5How countries appear in the additive manufacturing edition
  42. B.6National Baseline Editions in the 2026 programme
  43. B.7Licences of each kind of material
  44. B.8This edition in every format
  45. C.1Release path for this version

04 · GCRI reading

How GCRI reads this edition.

The evidence supports reading additive manufacturing as production infrastructure with open part acceptance questions. Market growth is real but uneven, defence use is rising and the footprint is thinly measured. Evidence is strongest for company results and official counts, and weakest for energy, supply and workforce.

FIN-002 · GOV-007 · HLT-009 · SYS-012

05 · Publication record

Version, dates and contributors.

The identity of this edition as its title pages record it. A review copy has no DOI; the DOI is issued at deposit.

Publication ID
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
સંસ્કરણ
1.0.0, review copy
Edition date
Evidence close
સ્થિતિ
Draft under stewardship review; not yet released
Editor
Saeed Valadbaygi
Publisher of record
Global Centre for Risk and Innovation (GCRI)
Licence of the text
CC BY 4.0
DOI
Issued at deposit, on release
Previous edition
none: first edition of the series
Next edition
NR-XTECH-MANUFACTURING-GLOBAL-2027-v1.0.0

Contributors

ભૂમિકાContributionBy
ConceptualisationSeries architecture and the additive manufacturing modelS. Valadbaygi (ed.)
MethodologyBaseline method, dependency scoring and status grammarReports editorial team, GCRI
Investigation · data curationSource review of additive manufacturing releases, statistics and the peer-reviewed literature to evidence closeReports editorial team, GCRI
Writing, original draftAll chapters; additive manufacturing-assisted drafting, disclosed belowEditor · editorial team
Writing, review and editingFive review passes before releaseSteward reviewers (scheduled)
VisualisationPages, figures and tables in the Nexus design standardReports editorial team, GCRI
SupervisionEdition governance, registry record and depositS. Valadbaygi (ed.)

Review before release

Passવ્યાપByરાજ્ય
1Scientific and technicalGCRI · key TScheduled
2Reproducibility of analytical valuesGCRI · key TScheduled
3Public meaning and claimsThe Global Risks Forum (GRF) · key MScheduled
4Finance-readiness boundaryThe Global Risks Alliance (GRA) · key FScheduled
5Regional context, safeguards and dual useRegional consortia · key NScheduled

Additive manufacturing assistance was used for drafting, consistency checks and page composition. Every number, citation and status label was checked against its source by the editorial team before freeze. No additive manufacturing system is recorded as an author or a reviewer, and no additive manufacturing output is printed as fact without a source.

06 · Downloads

Read it in print, take the data.

Draft, not yet releasedReview copies of a draft in stewardship review. The released edition carries its DOI and replaces them.

  • Print

    • PDF, A4

      The designed print edition, A4: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF113 pages1.0 MBTagged, with bookmarks

      SHA-256 9f9c0bdd112c9edd155a42b7deb0eb16a83972daf6aec20f918c9a6922d6a487

    • PDF, US Letter

      The designed print edition, US Letter: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF118 pages1.1 MBTagged, with bookmarks

      SHA-256 c5ba6a27b592bc5d4e5fc9678986c1ea05dc4babaca6d264fe12924a87a0f417

  • Web edition

  • Data bundle

    • Indicators, CSV

      16 indicators with unit, year, status and source

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.csv1 KB

      SHA-256 ec47045da100257a326321c531b49ec523a5f9c59161000e0c8d1978ca168b69

    • Indicators, JSON

      The same indicators with the edition’s identity and licence

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.json2 KB

      SHA-256 e578505481cdacf1ca29fcbcad3010be8d9b2541e4721bc2eb8304d90412c885

    • Findings, CSV

      12 findings with status, evidence-quality level and references

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-findings.csv3 KB

      SHA-256 ac3ad24fc5cc470e585bd6806a983db4c2224f62f35c653e1c9852511e02a925

  • Citation files

    • Citation, BibTeX

      For LaTeX and reference managers

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.bib1 KB

      SHA-256 af46b873e727338fcfbee92dfb1a02521c9d3ab443debfe0dd537fcdb45b0df1

    • Citation, RIS

      For Zotero, EndNote and Mendeley

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.ris1 KB

      SHA-256 8de9cef71c5448dc0b204326d1399f299e681eec8cb4b05fadb79cb6cd0fb600

    • Citation, CITATION.cff

      Citation File Format 1.2.0, for GitHub, Zenodo and software catalogues

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.cff1 KB

      SHA-256 13283b08157f9aa4185284587c66dec81aece9e75d2ca6a40564a630aeba9282

Check a file with its SHA-256: shasum -a 256 <file> (macOS, Linux) or Get-FileHash <file> (Windows). Text, tables and figures by Nexus: CC BY 4.0; each source keeps its own licence.

07 · Cite

Cite this report.

This edition is a draft in stewardship review. Cite it as a draft; the DOI and the UNI are issued at deposit, and the citation then names them.
Catalogue keyNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

Standards applied to NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

Cite as

S. Valadbaygi (ed.), Exponential Technology Report 2026: Additive and Advanced Manufacturing. Reports, Baseline Edition 2026. The Global Centre for Risk and Innovation (GCRI) for the Nexus Consortium, Toronto, 2026. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE. DOI at deposit.

Applied

NS-1 catalogue identity (a UNI is allocated at deposit and resolves to this record), NS-2 citation and attribution, NS-3b dataset metadata, NS-5 figures and maps, NS-12 software and AI disclosure.

દેખરેખ

Corrections are new versions with a published notice; the earlier version stays resolvable.

An attestation is evidence, not a certificate. Nexus Standards parts are preparatory working drafts (2026).

APA 7
Valadbaygi, S. (Ed.). (2026). Exponential Technology Report 2026: Additive and Advanced Manufacturing (Baseline Edition 2026, Report No. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE) [Draft under review]. The Global Centre for Risk and Innovation (GCRI). https://therisk.global/nexus-reports/editions/xt-13/
Chicago
Valadbaygi, Saeed, ed. Exponential Technology Report 2026: Additive and Advanced Manufacturing. Baseline Edition 2026. Nexus Reports NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE. Draft under review. Toronto: The Global Centre for Risk and Innovation (GCRI), 2026. https://therisk.global/nexus-reports/editions/xt-13/.
BibTeX
@techreport{NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE,
  author      = {{GCRI Systems Evidence}},
  editor      = {Valadbaygi, Saeed},
  title       = {{Exponential Technology Report 2026: Additive and Advanced Manufacturing}},
  institution = {The Global Centre for Risk and Innovation (GCRI)},
  address     = {Toronto},
  year        = {2026},
  type        = {Nexus Reports, Baseline Edition 2026},
  number      = {NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE},
  note        = {Draft under stewardship review; not yet released. DOI assigned at deposit},
  url         = {https://therisk.global/nexus-reports/editions/xt-13/}
}
RIS
TY  - RPRT
AU  - GCRI Systems Evidence
ED  - Valadbaygi, Saeed
TI  - Exponential Technology Report 2026: Additive and Advanced Manufacturing
T3  - Nexus Reports
ET  - Baseline Edition 2026
PY  - 2026
PB  - The Global Centre for Risk and Innovation (GCRI)
CY  - Toronto
SN  - NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE
UR  - https://therisk.global/nexus-reports/editions/xt-13/
N1  - Draft under stewardship review; not yet released. DOI assigned at deposit.
LA  - en
ER  - 
NR-CIT-1 (house style)
S. Valadbaygi (ed.), Exponential Technology Report 2026: Additive and Advanced Manufacturing. Nexus Reports, Baseline Edition 2026. The Global Centre for Risk and Innovation (GCRI) for the Nexus Consortium, Toronto, 2026. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE. DOI at deposit.
અહેવાલોયોગદાન આપો

Send evidence or a correction on Additive and Advanced Manufacturing.

Reports is the Consortium’s quarterly publication, written by six desks. This page sits with the GCRI Systems Evidence desk. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work. Sent to the wrong desk, it is forwarded, not refused.

GCRI Systems Evidence deskExponential Technology
Contribution form · reports.contribution.gcri

ક્યારેય વ્યક્તિગત ડેટા, સંવેદનશીલ માળખાકીય સુવિધાઓની વિગતો અથવા તમને શેર કરવાનો અધિકાર ન હોય તેવું કંઈપણ મોકલશો નહીં. ઉપયોગ પહેલાં દરેક યોગદાનની સમીક્ષા થાય છે; તે મોકલવાથી કોઈ લેખકત્વ અથવા સંપાદકીય અધિકારો મળતા નથી, અને પ્રાયોજકતા ક્યારેય કોઈ તારણ ખરીદી શકતી નથી.

Reports · GCRI

Bring evidence to the next edition.

Every quarter closes on a sealed evidence cut. A correction, a source or a method received before the cut is reviewed for that edition.

  • NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE
  • CC BY 4.0
  • Evidence close 30 September 2026

CC BY 4.0 Free to read. Text and figures: CC BY 4.0. Data: CC0 1.0. Authors keep copyright. Published by GCRI Canada.

Your role here

What you can do from this page.

  • ReaderNew to the reports? A short guide to reading an edition.Start here
  • ContributorYour contributions to this edition and the reviews open on it are listed below the edition.Contribute
  • ReviewerReview for this desk; verified reviews are credited.Become a reviewer
  • Editor, steward or boardQueues, decisions and production are in the workspace.My workspace

This edition

Contributions and reviews on XT-13

Open contributions to this edition
0
Reviews open on this edition
0

Open your account on this site to see your own contributions to this edition and any review invited from you.