Skip to content

Draft, not yet released. In stewardship review. Not indexed until the first approved release.

  • 報告書
  • ベースライン版 2026
  • Complete edition

Exponential Technology Report 2026: Additive and Advanced Manufacturing

The designed PDF, A4 or US Letter, is under Downloads below. To print this page instead, choose the paper in the print dialog. Review copies: the PDF with its DOI is issued at release.

Additive and Advanced Manufacturing 2026

Imprint

編集者
Saeed Valadbaygi, Chief Steward and Managing Editor, the Global Centre for Risk and Innovation (GCRI)
正式な発行者
The Global Centre for Risk and Innovation (GCRI) for the Nexus Consortium, Toronto
Report number
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE
エビデンス締め切り
30 September 2026, cut DC-XTECH-MANUFACTURING-GLOBAL-2026-B0
ステータス
Draft under stewardship review; not yet released
DOI and UNI
Issued at deposit
ライセンス
CC BY 4.0 for Nexus-authored text, tables and figures; third-party material keeps its own licence
Cite as
Valadbaygi, S. (Ed.). (2026). Exponential Technology Report 2026: Additive and Advanced Manufacturing (Baseline Edition 2026, Report No. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE) [Draft under review]. The Global Centre for Risk and Innovation (GCRI). https://therisk.global/nexus-reports/editions/xt-13/

目次

  1. ·

    Executive summary

  2. 1

    Chapter 1. Additive manufacturing is production infrastructure that is still being qualified

  3. 2

    Chapter 2. Key findings

  4. 3

    Chapter 3. Systems and sectors at baseline

  5. 4

    Chapter 4. Risks and capability

  6. 5

    Chapter 5. Defence demand outruns part acceptance and supply

  7. 6

    Chapter 6. Readings from the other desks

  8. 7

    Chapter 7. The 2027 agenda

  9. 8

    Chapter 8. Systems in depth

  10. A

    Annex A. Methodology

  11. B

    Annex B. Data appendix

  12. C

    Annex C. References and record

Downloads

Draft, not yet releasedReview copies of a draft in stewardship review. The released edition carries its DOI and replaces them.

  • 印刷

    • PDF, A4

      The designed print edition, A4: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF113 pages1.0 MBTagged, with bookmarks

      SHA-256 9f9c0bdd112c9edd155a42b7deb0eb16a83972daf6aec20f918c9a6922d6a487

    • PDF, US Letter

      The designed print edition, US Letter: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF118 pages1.1 MBTagged, with bookmarks

      SHA-256 c5ba6a27b592bc5d4e5fc9678986c1ea05dc4babaca6d264fe12924a87a0f417

  • Web edition

  • データバンドル

    • Indicators, CSV

      16 indicators with unit, year, status and source

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.csv1 KB

      SHA-256 ec47045da100257a326321c531b49ec523a5f9c59161000e0c8d1978ca168b69

    • Indicators, JSON

      The same indicators with the edition’s identity and licence

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.json2 KB

      SHA-256 e578505481cdacf1ca29fcbcad3010be8d9b2541e4721bc2eb8304d90412c885

    • Findings, CSV

      12 findings with status, evidence-quality level and references

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-findings.csv3 KB

      SHA-256 ac3ad24fc5cc470e585bd6806a983db4c2224f62f35c653e1c9852511e02a925

  • Citation files

    • Citation, BibTeX

      For LaTeX and reference managers

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.bib1 KB

      SHA-256 af46b873e727338fcfbee92dfb1a02521c9d3ab443debfe0dd537fcdb45b0df1

    • Citation, RIS

      For Zotero, EndNote and Mendeley

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.ris1 KB

      SHA-256 8de9cef71c5448dc0b204326d1399f299e681eec8cb4b05fadb79cb6cd0fb600

    • Citation, CITATION.cff

      Citation File Format 1.2.0, for GitHub, Zenodo and software catalogues

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.cff1 KB

      SHA-256 13283b08157f9aa4185284587c66dec81aece9e75d2ca6a40564a630aeba9282

Check a file with its SHA-256: shasum -a 256 <file> (macOS, Linux) or Get-FileHash <file> (Windows). Text, tables and figures by Nexus: CC BY 4.0; each source keeps its own licence.

Executive summary

The edition on a few pages: the abstract, the key messages, the headline finding and what each steward reads in it.

6 min read1 figure0 tables12 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

S.1Abstract

Additive manufacturing matters to the Nexus programme as production infrastructure. Machines build parts layer by layer from polymer or metal powder, wire or resin, and they bring new dependencies: powder and inert gas, qualified process parameters, skilled operators and digital build files that can cross borders. Global revenue was about USD 24.2 billion in 2025, up 10.9%, with printing services growing fastest and machine sales growing slowly, according to trade summaries of the Wohlers Report2. Two listed machine makers reported lower 2025 revenue34, and one machine maker entered Chapter 11 in July 20255. Demand is shifting to defence and aerospace production. The US Navy reports nearly 120 additive parts in development in a year and 20 installed7, and a 2018 company article records the first mass production of a jet engine part6. The weakest evidence is on the physical base. A peer-reviewed comparison found specific energy consumption of 113.66 MJ/kg for one polymer laser sintering platform14, and no common-basis figure for metal machines was bound. A 2025 NIOSH evaluation of a metal powder facility found particles spreading through the building, below exposure limits20. This baseline sets out what the evidence supports and where it is thin. It forecasts no market and ranks no company or country.

S.2Key messages

Six readings that frame the additive manufacturing baseline, and the eight questions this edition answers, each with its status and source.

  1. About USD 24.2 billion in 2025, in a trade summary of a commercial report.2

    How big is the market?Reported

  2. In services and materials; machine sales grew 3.6%; Asia-Pacific grew fastest.2

    Where is growth?Reported

  3. Two listed makers reported lower 2025 revenue and one filed for Chapter 11.345

    Are machine makers growing?Reported

  4. Yes for some parts: a 2018 jet engine part and Navy parts in 2026.67

    Is it in production?Reported

  5. One polymer platform used about 114 MJ/kg; metal machines are not bound.14

    What does it cost in energy?Reported

  6. A 2025 evaluation found exposures below limits and powder spreading through a facility.20

    Is it safe to run?Reported

  7. The US controlled metal machines in an interim final rule effective 6 September 2024.2228

    Is it controlled?Reported

  8. Whether defence part acceptance demand outruns powder, standards and skills. SCN-XT13-QAL-01

    What will 2027 test first?Expert input

S.3Headline finding

ReportedEQL 3NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-GOV-007

The US Navy reports nearly 120 additive manufacturing parts placed into development in a year, 20 installed and more than 1,400 cumulative days of delay removed.

Figure S.1US Navy additive parts in a year
項目Bar, scaled to the largest value値
Parts placed into development (nearly)120
Parts installed20

Source: NAVSUP Weapon Systems Support release of 30 June 20267. Official release, not an independent audit.

Additive parts now enter defence production, so part acceptance and supply are production questions. NAVSEA reports lead times cut by up to 70% for some components. The Navy links the effort to a goal of three submarines a year and to strain on casting and forging7. The workforce need is stated as 250,000 skilled workers over a decade8.

S.4At a glance

24.2USD billion

global revenue, 20252

48パーセント

services share of revenue2

3.6パーセント

machine sales growth, 20252

20parts

installed by the US Navy7

250,000workers

Navy maritime industrial base need over a decade8

85submissions

AM-Bench 2025 challenge12

S.5What each steward reads in it

GCRI · KEY T

Technical Truth

The evidence supports reading additive manufacturing as production infrastructure with open part acceptance questions.

GRF · KEY M

Public Meaning

For most people the story arrives as a headline about printed parts, a printed object or a controversy.

GRA · KEY F

Capital Meaning

Readiness implications only. Growth sits in services, machine makers report losses and one filed for Chapter 11.

NEXUS

統合

Additive manufacturing is well described by market totals and thinly measured as a system.

S.6What this edition is, and is not

What this edition is

A baseline: the 2026 state of additive and advanced manufacturing as infrastructure and the couplings through which it carries risk into other systems. It synthesises published evidence and ranks no country, company or asset.

What it is not

Not a forecast of any market, a technology or vendor ranking, an endorsement of any machine, process or company, or an assessment of any programme. Standards, export controls and procurement are decisions of competent authorities.

What comes next

National, regional and sector evidence feeds the 2027 additive manufacturing edition through the federation. Each edition reports what changed against this baseline: observations, source revisions, method changes, scenario updates and corrections.

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  2. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  3. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  4. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  5. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  6. 6GE Aerospace (ed.), Manufacturing milestone: 30,000 additive fuel nozzles (company article, 4 October 2018; Auburn, Alabama; one piece replacing about 20; about 25% lighter; more than 40 printers; vendor announcement, weak evidence). GE Aerospace, Evendale. Observation year 2018. Accessed 2026-11-03.back
  7. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  8. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  9. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  10. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05.back
  11. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  12. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back

Additive manufacturing is production infrastructure that is still being qualified

Part I describes systems and their couplings. It ranks no country or operator and assesses no authority.

7 min read2 figures1 table15 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

1.1The questions this part answers

Key questions

  • Where is additive manufacturing risk concentrated?
  • Which couplings carry additive manufacturing shocks into other systems?
  • Which additive manufacturing capabilities hold under compound stress?
  • What must 2027 evidence measure first?

In this part

  • Narrative
  • Headline finding
  • Lead figure
  • Five footprint and governance chapters
  • Twelve-domain reading
  • Sector screens
  • Dependency matrix
  • Risk objects
  • Capability ladder
  • シナリオ
  • Three lenses
  • ポートフォリオ

1.2The argument

Additive manufacturing is often told as a story of new machines. The 2026 evidence reads it as production infrastructure with its own dependencies: powder and gas, qualified processes, operators and digital files71420.

The market evidence is mixed. Revenue grew 10.9% in 2025, but growth came from services, and machine sales grew 3.6%2. Two listed machine makers reported lower revenue34 and one entered Chapter 115. These market figures are trade summaries and company releases, not audited industry statistics.

Production use is real and narrow. A jet engine fuel nozzle tip moved to mass production by 20186. The US Navy reports 20 additive parts installed in a year and nearly 120 in development7, and the DoD strategy set the direction in 202110. Part acceptance is the limit, and the standards and benchmark work is still open111215.

The physical base is the least measured part. One polymer platform used about 114 MJ/kg14, metal machines are not bound, powder volumes are not bound, and a 2025 evaluation found powder spreading through a facility20.

Figure 1.1How large is global additive manufacturing revenue? USD billion

Revenue rose between the two summaries. The reported growth rate is 10.9%, while the ratio of the two rounded values is 10.5%, so the earlier year may have been revised. Both are commercial estimates read through trade summaries12.

項目Bar, scaled to the largest value値
2024 revenue in the Wohlers Report 2025 summary21.9
2025 revenue in the Wohlers Report 2026 summary24.2

Source: as cited in the note to this figure. Year 2025.

Figure ID FIG-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-01-003

24.2USD billion

revenue, 20252

21.9USD billion

revenue, 20241

48パーセント

services share, 20252

26パーセント

machine sales fall, 20241

1.3The six-sector nexus: twenty couplings across five assessed sectors

The additive manufacturing-centred matrix types the twenty couplings between the five core systems, read for their additive manufacturing content. Strengths are Nexus estimates (ESTIMATED) from the cited evidence and analogue events; they set the graph that 2027 evidence will test.

Figure 1.2Couplings across the six sectors

Each line is one coupling from one sector to another, drawn by the strength the edition assigns. Strengths are Nexus estimates from the cited evidence and analogue events. Infrastructure: not assessed in this edition’s coupling matrix, so it is drawn hollow with no couplings. The hexagon is the estate doctrine: six sectors and fifteen relations.

  • Strong
  • 中程度
  • Weak
  • Not assessed in this edition

Source: this edition’s coupling matrix (Table 1.1); status Estimated. Hexagon: the estate doctrine (Signature).

Table 1.1Coupling matrix: from the row system to the column system
From, toWATENEFOOHLTBIO
WAT 水·WEAK
facility cooling
WEAK
no documented link
WEAK
no documented link
WEAK
no documented link
ENE エネルギーWEAK
cooling load
·WEAK
no documented link
WEAK
no documented link
WEAK
no documented link
FOO 食料WEAK
no documented link
WEAK
no documented link
·WEAK
no documented link
WEAK
no documented link
HLT 健康WEAK
no documented link
WEAK
workforce
WEAK
no documented link
·WEAK
no documented link
BIO 生物多様性WEAK
no documented link
WEAK
no documented link
WEAK
no documented link
WEAK
no documented link
·
Strength: strong, moderate or weak; a Nexus estimate (status Estimated) from cited evidence and analogue events. The scale is defined in Annex A.

Transmission paths

  1. 01

    TRD → MIN → INF

    A powder or alloy supply or export-control change slows metal production.

    Inferred export controls and critical minerals2225

  2. 02

    GOV → INF

    Defence demand pulls additive parts into production and sets part acceptance pace.

    Reported Navy figures7

  3. 03

    FIN → INF

    Weak machine sales and consolidation affect machine supply and support.

    Reported company results345

  4. 04

    ENE → INF

    Process energy and gas use constrain siting and cost at scale.

    Inferred energy estimate14

  5. 05

    INF → HLT

    Powder handling exposes workers where controls are weak.

    Reported NIOSH evaluation20

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  2. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  3. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  4. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  5. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  6. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  7. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  8. 6GE Aerospace (ed.), Manufacturing milestone: 30,000 additive fuel nozzles (company article, 4 October 2018; Auburn, Alabama; one piece replacing about 20; about 25% lighter; more than 40 printers; vendor announcement, weak evidence). GE Aerospace, Evendale. Observation year 2018. Accessed 2026-11-03.back
  9. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  10. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03.back
  11. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  12. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back
  13. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  14. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  15. 25International Energy Agency (ed.), Global Critical Minerals Outlook 2026, revised version, July 2026 (full report opened; export controls announced, proposed or updated in 2025 and 2026 on tungsten, rare earths and other minerals; tungsten prices rose sixfold; aerospace and defence depend on cobalt, titanium, tungsten and yttrium; no figure used in copy). IEA, Paris. Observation year 2025. Accessed 2026-11-05.back

Key findings

Twelve findings carry the additive manufacturing baseline. They are grouped by coupling and never ranked. Each resolves to its source or, where Nexus analysis is involved, to its stated method.

7 min read1 figure0 tables18 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

2.1Headline finding

ReportedEQL 3NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-GOV-007

The US Navy reports nearly 120 additive manufacturing parts placed into development in a year, 20 installed and more than 1,400 cumulative days of delay removed.

Figure 2.1US Navy additive parts in a year
項目Bar, scaled to the largest value値
Parts placed into development (nearly)120
Parts installed20

Source: NAVSUP Weapon Systems Support release of 30 June 20267. Official release, not an independent audit.

Implication

Additive parts now enter defence production, so part acceptance and supply are production questions. NAVSEA reports lead times cut by up to 70% for some components. The Navy links the effort to a goal of three submarines a year and to strain on casting and forging7. The workforce need is stated as 250,000 skilled workers over a decade8.

What would move it

Parts installed in the next report, the part acceptance route for materials and processes, and independent review would each move this finding.

2.2金融

  1. ReportedEQL 2NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-FIN-001

    A trade summary of the Wohlers Report 2025 puts global additive manufacturing revenue at about USD 21.9 billion in 2024, up 9.1%, with machine sales down about 26% and printing services 47% of revenue.123

  2. ReportedEQL 2NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-FIN-002

    A trade summary of the Wohlers Report 2026 puts global revenue at about USD 24.2 billion in 2025, up 10.9%; services grew 15.5% and hold 48% of revenue, machine sales grew 3.6%, and Asia-Pacific grew 19.8% against 9% for Europe and the Americas.2

  3. ReportedEQL 4NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-FIN-003

    Stratasys reported 2025 revenue of USD 551.1 million against USD 572.5 million in 2024, and 3D Systems reported USD 386.9 million, down 12%.34

  4. ReportedEQL 4NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-FIN-004

    Desktop Metal and certain subsidiaries filed for Chapter 11 on 28 July 2025, after Nano Dimension closed its purchase of Markforged on 25 April 2025.5

2.3インフラ

  1. ReportedEQL 2NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-INF-005

    In a 2018 company article, GE Aviation reported its 30,000th additive fuel nozzle tip, a one-piece part replacing about 20 welded and brazed pieces, about 25% lighter, made on more than 40 printers.6

  2. ReportedEQL 4NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-INF-011

    NIST AM-Bench 2025 completed 8 metal and 1 polymer benchmark sets and drew 85 challenge problem submissions, and a 2024 review of in-situ monitoring names standardisation and reliability as open gaps.1215

2.4ガバナンス

  1. ReportedEQL 3NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-GOV-006

    The DoD additive manufacturing strategy, released in January 2021 by the Office of the Under Secretary for Research and Engineering, set a common vision for using additive manufacturing in acquisition and sustainment.10

  2. ReportedEQL 3NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-GOV-007

    The US Navy reports nearly 120 additive parts placed into development in a year, 20 installed and more than 1,400 cumulative days of delay removed, and NAVSEA found lead times cut by up to 70% for some components.78

  3. ReportedEQL 2NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-GOV-010

    The US Bureau of Industry and Security added a control on metal additive manufacturing equipment in an interim final rule of September 2024, and SIPRI had set out the proliferation case for controls on machines, feedstock and digital files in 2017.212228

2.5エネルギー

  1. ReportedEQL 3NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-ENE-008

    A peer-reviewed comparison estimated specific energy consumption of 113.66 MJ/kg for one polymer laser sintering platform and 156.10 MJ/kg for one low-cost heat sintering platform, in line with earlier studies of 107 to 144 MJ/kg.14

2.6健康

  1. ReportedEQL 3NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-HLT-009

    A NIOSH health hazard evaluation of February 2025 found metal particles in a powder bed fusion room, powder spread through the facility by airflow and metals on workers skin and clothing, all below exposure limits.1920

2.7システミック

  1. Expert inputEQL 2NRF-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-SYS-012

    The leading compound pathway for 2027 testing is defence and aerospace demand running into powder, part acceptance and workforce limits while machine makers consolidate. § scenario

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  2. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  3. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  4. 23Wohlers Associates, powered by ASTM International (ed.), 3D printing and AM market grows 9.1% according to Wohlers Report 2025 (press release, Washington, 29 April 2025, distributed by PR Newswire and read in full on a republishing page; the report has been published for 30 consecutive years; global AM industry grew 9.1% to USD 21.9 billion; growth mostly in Asia and China; system makers declined while services, software and materials grew; the report itself was not opened). Wohlers Associates, Washington. Observation year 2024. Accessed 2026-11-05.back
  5. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  6. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  7. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  8. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  9. 6GE Aerospace (ed.), Manufacturing milestone: 30,000 additive fuel nozzles (company article, 4 October 2018; Auburn, Alabama; one piece replacing about 20; about 25% lighter; more than 40 printers; vendor announcement, weak evidence). GE Aerospace, Evendale. Observation year 2018. Accessed 2026-11-03.back
  10. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  11. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back
  12. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  13. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  14. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  15. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05.back
  16. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  17. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03.back
  18. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back

Systems and sectors at baseline

6 min read0 figures2 tables12 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

3.1Where each system stood at evidence close

FIN · Market

Global additive manufacturing revenue

24.2USD billion

up 10.9% on 2024; trade summary of a commercial report.

Reported2025trade summary2

FIN · Services

Share of revenue from printing services

48パーセント

services grew 15.5%; machine sales grew 3.6%.

Reported2025trade summary2

FIN · Machine makers

Revenue of one listed machine maker

551.1USD million

against 572.5 in 2024; company release.

Reported2025company3

GOV · Defence

Additive parts installed by the US Navy in a year

20parts

nearly 120 in development; official release.

報告値2026DVIDS7

ENE · Energy

Specific energy, polymer laser sintering, one platform

113.66MJ/kg

estimate; metal machines not bound.

Reported2015journal14

INF · Benchmarks

Challenge problem submissions to AM-Bench 2025

85submissions

8 metal and 1 polymer benchmark sets.

報告値2025NIST12

3.2Domain posture

Each of the twelve coupled domains is read through additive manufacturing, in words, not scored. The coupling column names the dependency that carries additive manufacturing risk into each domain.

Table 3.1Each domain read in words, not scored
分野Posture at baseline結合ステータス
WATCooling-water use of additive facilities is not published.ENE → WATExpert input EQL 1
ENEOne polymer platform used about 114 MJ/kg; metal machines on a common basis are not bound.ENE ↔ INFReported EQL 3
FOONo documented coupling at baseline in the sources read.none documentedExpert input EQL 1
HLTOccupational exposure to metal powders was evaluated in 2025; medical device use is not evidenced here.INF → HLTReported EQL 3
BIONo documented coupling at baseline in the sources read.none documentedExpert input EQL 1
CLIProcess energy and gas use matter at scale; no figure bound for metals.INF → CLIExpert input EQL 1
INFThe core system: parts in production, benchmark data, open gaps in monitoring and standards.the core systemReported EQL 4
FINUSD 24.2 billion of revenue in 2025; weak machine sales; one Chapter 11 filing.FIN → INFReported EQL 4
DATDigital build files and the digital thread are central to controls and security; no figure bound.INF ↔ DATInferred EQL 2
AICNo documented coupling to compute platforms at baseline; process-control research is preprint level.none documentedExpert input EQL 1
MINPowder and alloy supply matter for production; volumes are not bound.MIN → INFInferred EQL 2
TRDExport controls on metal machines and concentrated machine exports shape access.INF ↔ TRDReported EQL 2

3.3Sector screens

All sixteen sectors are screened for their dependence on additive manufacturing, on the same grammar as every national edition. The evidence column describes coverage of the baseline evidence, not the performance of the sector.

Table 3.2Sectors: baseline evidence and the exposure to watch
コード部門Baseline evidenceExposure to watchEvidence coverage
GS-00Cross-systemadditive production couples to defence, minerals and tradepart acceptance limitTHIN
GS-01水cooling-water use not publishedfacility sitingTHIN
GS-02エネルギーenergy of one polymer platform bound14metal machine energyTHIN
GS-03食料no documented couplingnone documentedTHIN
GS-04健康occupational exposure evaluated20exposure across facilitiesPARTIAL
GS-05金融revenue and machine-maker results234consolidationPARTIAL
GS-06開発access to machines and skillswidening gapsTHIN
GS-07気候footprint at scale not boundenergy demandTHIN
GS-08災害no documented couplingnone documentedTHIN
GS-09インフラspare parts for ships and submarines7single-site dependencePARTIAL
GS-10都市no documented couplingnone documentedTHIN
GS-11生物多様性no documented couplingnone documentedTHIN
GS-12地球観測no documented couplingnone documentedTHIN
GS-13サイバーとデジタルdigital thread and build files1321file securityTHIN
GS-14政策DoD strategy and export controls1022controls and procurementPARTIAL
GS-15科学benchmark data and process reviews1215common benchmarksGOOD

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  2. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  3. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  4. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  5. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  6. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  7. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  8. 13Gibbons, D.W. and Witherell, P.W., A reference activity model for additive manufacturing: powder bed fusion, NIST AMS 100-60, July 2024 (front matter and abstract read). National Institute of Standards and Technology, Gaithersburg. Observation year 2024. Accessed 2026-11-03.back
  9. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  10. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  11. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  12. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back

Risks and capability

Four additive manufacturing risk objects open the portfolio. Order carries no rank. Each is read across driver, exposure, vulnerability, capacity, cascade and consequence.

6 min read0 figures1 table18 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

4.1Risk objects

Each risk is read across the chain from hazard to consequence, with its status and evidence-quality level.

  1. InferredEQL 3RSK-XT13-INF-001

    Part acceptance limits production growth

    要因
    defence and aerospace demand for qualified parts710
    曝露
    long-lead castings and forgings being replaced
    脆弱性
    part acceptance by part is slow; process monitoring has open gaps15
    能力
    standards, benchmarks and reference models111213
    カスケード
    INF → GOV, FIN
    ホライズン
    1 to 5 years
  2. InferredEQL 2RSK-XT13-MIN-002

    Powder and alloy supply chokepoint

    要因
    concentrated alloy and powder supply and export controls2533
    曝露
    metal machine users in aerospace and defence
    脆弱性
    few qualified powder sources per alloy; volumes not bound
    能力
    supplier offers of assured powder supply, such as powder from reclaimed scrap33
    カスケード
    MIN → INF
    ホライズン
    1 to 5 years
  3. ReportedEQL 3RSK-XT13-FIN-003

    Machine-maker consolidation and failure

    要因
    weak machine sales and losses345
    曝露
    users depending on one maker for support and parts
    脆弱性
    closed software and qualified settings tied to one machine
    能力
    service providers and materials sellers grew2
    カスケード
    FIN → INF
    ホライズン
    1 to 5 years
  4. InferredEQL 2RSK-XT13-GOV-004

    Fragmented controls and digital file exposure

    要因
    export controls on machines and files2122
    曝露
    research collaboration and supply chains
    脆弱性
    intangible transfer of build files is hard to control21
    能力
    strategies, controls and standards102211
    カスケード
    GOV → INF, TRD
    ホライズン
    1 to 5 years

4.2Capability ladder

Existence is not readiness. Each of the fifteen capability functions is placed on the ladder by the strongest public evidence for additive manufacturing at the global level.

Table 4.1Capabilities on the ladder of evidence: listed, exists, demonstrated, tested
機能RungレベルStrongest public evidence at baseline
Prevention and mitigationEXISTSsafety guidance for powder handling published1920
Monitoring and observationLISTEDno common tracker of part acceptance rates or scrap
早期警報LISTEDno consolidated watch on powder or machine supply
Preparedness and planningEXISTSDoD strategy and Navy planning107
Redundancy and reservesLISTEDpowder reserves are not documented
対応LISTEDno tested response to a loss of a machine maker or powder source
Continuity of critical servicesLISTEDspare parts by additive route are early7
復旧LISTEDnot applicable at baseline; no event to recover from
AdaptationEXISTSpart acceptance of processes rather than parts is under discussion7
社会保障LISTEDnot applicable at baseline
金融と保険LISTEDmachine-maker finance is weak345
Institutional coordinationEXISTSstandards committees and defence programmes1110
Technical infrastructureEXISTSbenchmark data and reference models1213
労働力LISTEDa 250,000-worker Navy need is stated, no additive figure bound8
Research capacityADEQUATEactive benchmark and preprint base121516
A capability listed in policy is not a tested one; each rung is the strongest public evidence at baseline.

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  2. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  3. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back
  4. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03.back
  5. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  6. 13Gibbons, D.W. and Witherell, P.W., A reference activity model for additive manufacturing: powder bed fusion, NIST AMS 100-60, July 2024 (front matter and abstract read). National Institute of Standards and Technology, Gaithersburg. Observation year 2024. Accessed 2026-11-03.back
  7. 25International Energy Agency (ed.), Global Critical Minerals Outlook 2026, revised version, July 2026 (full report opened; export controls announced, proposed or updated in 2025 and 2026 on tungsten, rare earths and other minerals; tungsten prices rose sixfold; aerospace and defence depend on cobalt, titanium, tungsten and yttrium; no figure used in copy). IEA, Paris. Observation year 2025. Accessed 2026-11-05.back
  8. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back
  9. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  10. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  11. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  12. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  13. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  14. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  15. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03.back
  16. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  17. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  18. 16Bhagat, K. and Rudraraju, S., A numerical investigation of dimensionless numbers characterising meltpool morphology of the laser powder bed fusion process, arXiv:2211.06312, submitted 11 November 2022 (abstract page read; simulation study). arXiv, Ithaca. Observation year 2022. Accessed 2026-11-03.back

Defence demand outruns part acceptance and supply

A conditional statement under stated assumptions, never a prediction.

2 min read0 figures0 tables2 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

5.1前提

Scenario SCN-XT13-QAL-01: what is assumed, and what is held constant.

ベースライン
the 2026 reference state in this edition
要因
defence and aerospace orders rise faster than qualified powder, standards and skilled operators
Analogues
the 2025 machine-maker failures and the 2024 export rule522
Interventions
none modelled: the specification describes the unmitigated case
Run state
narrative specification; quantified run scheduled for 2027

5.2The cascade, step by step

  1. 1

    GOV → INF

    defence orders pull additive parts into production lines

    2026

  2. 2

    INF → MIN

    demand presses on qualified powder for a few alloys

    2026

  3. 3

    FIN → INF

    a machine maker exits and qualified settings are stranded

    2025

  4. 4

    INF → HLT

    powder handling scales faster than exposure controls

    2025

  5. 5

    TRD → INF

    export controls and national rules diverge

    2024

  6. 6

    GOV → INF

    part acceptance shifts from parts to processes

    2026

5.3The scenario as a table of steps

How the shock in scenario SCN-XT13-QAL-01 would travel through Additive and Advanced Manufacturing’s coupled systems, step by step, under the assumptions the edition states.

ステップ何が起きるか出典
01 Governance to infrastructureDefence orders pull additive parts into production lines. Analogue or source: 2026.Edition XT-13, scenario SCN-XT13-QAL-01, step 1
02 Infrastructure to mineralsDemand presses on qualified powder for a few alloys. Analogue or source: 2026.Edition XT-13, scenario SCN-XT13-QAL-01, step 2
03 Finance to infrastructureA machine maker exits and qualified settings are stranded. Analogue or source: 2025.Edition XT-13, scenario SCN-XT13-QAL-01, step 3
04 Infrastructure to healthPowder handling scales faster than exposure controls. Analogue or source: 2025.Edition XT-13, scenario SCN-XT13-QAL-01, step 4
05 Trade to infrastructureExport controls and national rules diverge. Analogue or source: 2024.Edition XT-13, scenario SCN-XT13-QAL-01, step 5
06 Governance to infrastructurePart acceptance shifts from parts to processes. Analogue or source: 2026.Edition XT-13, scenario SCN-XT13-QAL-01, step 6

A teaching model of a conditional scenario under the edition’s stated assumptions: not a forecast, not a prediction and not a warning. Sources: Additive and Advanced Manufacturing 2026, scenario SCN-XT13-QAL-01 (2026); Additive and Advanced Manufacturing 2026, references (NR-CIT-1) (2026).

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  2. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back

Readings from the other desks

The additive manufacturing baseline is read through each steward’s lens, then once as a whole. Each lens is a projection of reviewed findings, not a separate argument. The other desks’ own editions of this subject are listed first, as cross-references, not copies.

16 min read0 figures8 tables32 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

6.1The other desks’ editions of this subject

Federation: each desk writes its own edition for the subjects in its remit. Until a desk releases, its edition shows its frame and the reading this edition printed for it.

デスク版状況識別子
GCRI Systems EvidenceSystems Evidence: Additive and Advanced Manufacturing 2026Drafted, in stewardship reviewNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
GRF Public DeliberationOutside this desk’s remitNot in remit
GRA Capital ReadinessOutside this desk’s remitNot in remit
Standards ProgressStandards Progress: Additive and Advanced Manufacturing 2026準備中NR-NXS-XT-13-2026-BASELINE (reserved)
Academy CapabilityCapability: Additive and Advanced Manufacturing 2026準備中NR-RA-XT-13-2026-BASELINE (reserved)
Index MeasurementOutside this desk’s remitNot in remit

6.2Three lenses

One edition, read by each steward. The lens of this site comes first.

GCRI · KEY T

Technical Truth

The evidence supports reading additive manufacturing as production infrastructure with open part acceptance questions. Market growth is real but uneven, defence use is rising and the footprint is thinly measured. Evidence is strongest for company results and official counts, and weakest for energy, supply and workforce.

FIN-002 · GOV-007 · HLT-009 · SYS-012

GRF · KEY M

Public Meaning

For most people the story arrives as a headline about printed parts, a printed object or a controversy. The baseline asks that public debate separate market estimates, company claims and official counts, and keep worker safety in view.

FIN-002 · HLT-009

GRA · KEY F

Capital Meaning

Readiness implications only. Growth sits in services, machine makers report losses and one filed for Chapter 11345. These show where finance-readiness evidence will matter. Nothing here is advice, a rating or an approval.

FIN-003 · FIN-004

NEXUS

統合

Additive manufacturing is well described by market totals and thinly measured as a system. The 2027 programme should bind part acceptance rates, publish a comparable energy footprint and test the defence demand pathway before orders outrun supply.

SYS-012 · M-01 · M-02

6.3Standards, Academy and steward contributions

How the Nexus Standards drafts, the Risk Academy and the three stewards feed each quarterly edition for additive manufacturing. The standards are a preparatory working draft (2026) and are cited as drafts, never as adopted standards.

Table 6.1The quarterly rhythm every edition follows
Quarter版問い境界
Q1State and Agenda今年は何が重要で、出発点はどこか。observed baseline stays distinct from planned work
Q2Evidence and BuildWhat new evidence and capability exist?a configured capability is not a validated result
Q3ストレステスト と準備状況What do scenarios and tests show?simulated loss or performance is not observed impact
Q4Annual Synthesis and RenewalWhat changed in the year, and what renews?release follows review, not event publicity deadlines
Table 6.2Who contributes what each quarter
Steward or body役割Contribution route
GCRI CanadaLead Institution and Consortium Secretariat; publisher of record; technical truth (key T)science and practice communities · GCRI gateway
グローバル・リスク・フォーラム(Global Risks Forum、GRF)leadership, dialogue and the Universe programme; public meaning (key M)policy, Universe and national adoption · GRF gateway
グローバル・リスク・アライアンス(Global Risks Alliance、GRA)finance, insurance and development readiness; capital meaning (key F)finance and insurance · GRA gateway
Nexus Standardspreparatory drafts on vocabulary, hazards, indicators and methodsStandards site · working groups HAZ, IND, MTH, FIN, AI
Risk Academylearning pathways tied to the agenda questionsAcademy gateway · learning by review
Nexus Standards and Academytechnology chapter inputs: GCRI evidence, NXS standards, RA capabilitytechnology editorial board

Standards drafts used in this edition

  • Risk vocabulary NRS-C1 (424 terms) for terms in the glossary
  • Hazard atlas NHS-1 1.1.0 (905 hazards in 120 families) for risk objects
  • Seven risk classes: global, catastrophic, existential, emerging, planetary, exponential, frontier-tech

Standards calendar to watch

  • Founding calls from 20 October 2026; working groups meet from 5 November 2026
  • Inaugural Global Standards Council session, 12 January 2027
  • Quarterly reviews in March, June, September and December, aligned with each edition

6.4GCRI reading: the model card

GCRI’s reading of this edition is its model card: what the national model is, what it computes and where it stops. It is printed in full in Annex A, with the methods it belongs to. Annex A, methodology

6.5Global Risks Forum reading: editorial essays

Four signed essays by the Reports editorial team set out the positions this edition takes. They are interpretation, labelled as such; the evidence they draw on is in the findings register.

Additive manufacturing is now a production tool for some parts and a prototype tool for most. The first is slow and qualified; the second is fast and uncertain. Keeping them apart avoids both hype and dismissal.

EDITORIAL ESSAY · 01

Production, not novelty

A commercial survey summary, a company release and an official count carry different weight. This edition labels each, and asks for primary reports before market figures are relied on.

EDITORIAL ESSAY · 02

Separate market estimates, company claims and counts

Energy, inert gas, powder and worker exposure are rarely counted together. A published footprint would show whether growth is limited by physics, supply or skills.

EDITORIAL ESSAY · 03

The footprint is the blind spot

Machines exist. The work is qualifying processes, materials and operators across many sites, and the standards and benchmark programmes are still open.

EDITORIAL ESSAY · 04

Part acceptance is the near-term work

6.6Global Risks Alliance reading: 2027 additive manufacturing readiness pack

The registers that open the 2027 global cycle. At baseline each is initialised from this edition.

Table 6.32027 additive manufacturing readiness pack
項目登録State at baselineFirst 2027 entry
E1Additive manufacturing risk state deltabaseline set by this editionchanges against the baseline
E2WEFH+B state deltafive global system readings setindicator updates and freshness
E3Agenda and Portfolio movementeight agenda items · 6 proposed objectsadmission decisions
E4Federation delivery registernational chapters in preparationnational chapters
E5Consortium capability registernational consortia formingfirst contributions
E6Leadership questions and challengesまだありませんfirst challenge log
E7Foundry technical statenational environments preparedfirst federation cut
E8Publication candidatestwelve findings carried forwardPUBLISH · HOLD dispositions
E9Universe readinessone candidate missionadmission and role spine
E10Correction registerなしfirst federation-wide cycle

Publication dispositions

  • 公開
  • Hold
  • Needs evidence
  • 制限付き
  • 置き換え済み

6.7Nexus Standards reading: standards and regulatory watch

Instruments and published guidance that shape the systems in this edition, by status on the retrieval date. The edition assesses no one’s compliance.

  • IN FORCE
  • PUBLISHED
  • DRAFT
  • PUBLISHED · VOLUNTARY
Table 6.4Standards and regulatory watch
インストゥルメント機関対象範囲ステータス関連性
ISO/ASTM 52900 terminology38ISO and ASTMglobalPUBLISHED · VOLUNTARYterms and definitions
ISO/ASTM 52911-1 and 52911-211ISO and ASTMglobalPUBLISHED · VOLUNTARYdesign for laser powder bed fusion
ISO/ASTM 5292211ISO and ASTMglobalPUBLISHED · VOLUNTARYdesign for directed energy deposition
Work item on feedstock re-use in metal powder bed fusion11ASTM F42globalDRAFTpowder re-use and sampling
ASTM F42 and ISO/TC 261 committees11ASTM and ISOglobalCOMMITTEE ACTIVEstandards programme
NIST AMS 100-60 reference model13NISTUSPUBLISHED 2024activity and data model
FDA technical considerations guidance27FDAUSPUBLISHED 2017medical devices
DoD Instruction 5000.9329DoDUS defenceIN FORCEadditive manufacturing policy
BIS interim final rule, ECCN 2B9102228BISUSIN FORCEexport control on metal machines
ISO/ASTM 5292039ISO and ASTMglobalPUBLISHED · VOLUNTARYpart acceptance of production sites

Changed since 2024

  • NIST updated its additive manufacturing standards page on 6 August 202611
  • A June 2026 feature reports Navy SUBSAFE qualification of printed parts under way at its Danville centre26
  • BIS published an interim final rule on metal machines in September 202422

To watch in 2027

  • Work items on feedstock re-use and design guides11
  • Navy part acceptance of materials and processes726
  • Amendments to the 2024 US export-control rule28

6.8Risk Academy reading: literature and evidence review, science and assessments

The review behind this edition covers additive manufacturing assessments, peer-reviewed science and the institutional reports that bind its findings. Systematic reviews for each agenda item begin in 2027.

Review protocol

問い
What does the published evidence establish about additive and advanced manufacturing as infrastructure and its couplings?
Sources searched
peer-reviewed journals and preprints; government bodies and standards committees; controls and strategies; market and supply analyses
期間
releases available at evidence close, 30 September 2026
選択
sources that bind or contextualise a finding in this edition
次の段階
systematic reviews for agenda items 01 to 05 in 2027
Table 6.5Peer-reviewed science and preprints
参照番号種類年役割Used for
Baumers, Tuck and Hague14conference paper2015supportsprocess energy
Chen et al.15preprint2024supportsin-situ monitoring
Bhagat and Rudraraju16preprint2022contextmelt pool physics
Hong, Cho and Cho17preprint2026contextprocess control, simulation only
Baumers and Ozcan18preprint2016contextdigital manufacturing
DebRoy et al.41journal article2018枠組みmetal processes
Herzog et al.42journal article2016枠組みmetal microstructure
Gebler et al.40journal article2014contextsustainability
Table 6.6Institutional and defence sources
参照番号Issuer年役割Used for
NIST AM-Bench12NIST2025supportsbenchmark data
NIST AMS 100-6013NIST2024supportsreference model
DoD strategy page10DoD2021supportsdirection
NAVSUP release7US Navy2026supportsparts counts
Maritime industrial base release8US Navy2025contextworkforce need
NIOSH page19NIOSH2026supportsハザード
SIPRI paper21SIPRI2017contextcontrols
Table 6.7Standards, policy and controls
参照番号Issuer年役割Used for
NIST standards page11NIST2026supportscommittees and work items
ISO/ASTM 5290038ISO and ASTM2021枠組みterminology
ISO/ASTM 5292039ISO and ASTM2023contextpart acceptance of sites
FDA guidance27FDA2017contextmedical devices
BIS interim final rule28BIS2024contextmetal machine controls
Table 6.8Market, supply and workforce overviews
参照番号Issuer年役割Used for
Wohlers Report trade summaries12trade press2025 to 2026supportsmarket size
Stratasys release3company2026supportsmachine-maker results
3D Systems release4company2026supportsmachine-maker results
Nano Dimension filing5company2026supportsconsolidation
AML3D announcement9company2026contextvendor claim
Powder supply commentary33supplier blog2025contextpowder
Salary survey34recruiter2026contextworkforce

Where the evidence agrees

  • Part acceptance is the main barrier to production use715
  • Metal powders are a worker hazard that needs controls1920
  • Machine sales are weak while services and materials grow234

Where it is unsettled

  • How large the market really is, since figures come from one commercial survey12
  • How much energy and gas metal machines use per kilogram of part14
  • How fast part acceptance can scale in defence and aerospace710

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  2. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  3. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  4. 38ISO and ASTM International (eds.), ISO/ASTM 52900:2021, Additive manufacturing, general principles, fundamentals and vocabulary, published 16 November 2021 by ISO/TC 261 (ISO open data deliverables record read; replaces the 2015 edition; confirmed at systematic review). ISO, Geneva. Observation year 2021. Accessed 2026-11-05.back
  5. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03.back
  6. 13Gibbons, D.W. and Witherell, P.W., A reference activity model for additive manufacturing: powder bed fusion, NIST AMS 100-60, July 2024 (front matter and abstract read). National Institute of Standards and Technology, Gaithersburg. Observation year 2024. Accessed 2026-11-03.back
  7. 27Food and Drug Administration (ed.), Technical considerations for additive manufactured medical devices: guidance for industry and Food and Drug Administration staff, issued 5 December 2017 (guidance document opened; draft issued 10 May 2016; notice of availability 82 FR 57462). FDA, Silver Spring. Observation year 2017. Accessed 2026-11-05.back
  8. 29Department of Defense (ed.), DoD Instruction 5000.93, Use of additive manufacturing in the DoD, June 2021 (announcement of the Office of the Under Secretary of Defense for Research and Engineering, 25 June 2021, read: establishes policy, assigns responsibilities and gives guidance on acquisition, part acceptance, data, security, standards and training; the instruction text host refused automated access). DoD, Washington. Observation year 2021. Accessed 2026-11-05.back
  9. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  10. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05.back
  11. 39ISO and ASTM International (eds.), ISO/ASTM 52920:2023, Additive manufacturing, qualification principles, requirements for industrial additive manufacturing processes and production sites, published 29 June 2023 by ISO/TC 261 (ISO open data deliverables record read). ISO, Geneva. Observation year 2023. Accessed 2026-11-05.back
  12. 26LaGrone, S., The Navy’s big 3-D printing bet (feature, USNI News, 23 June 2026; full text read through the publisher’s public feed: the Additive Manufacturing Center of Excellence in Danville, Virginia, opened in 2023 with USD 35 million from Virginia; wider use of printed parts is limited by Navy part acceptance rules, contract language and design rights; SUBSAFE qualification under way). US Naval Institute, Annapolis. Observation year 2026. Accessed 2026-11-05.back
  13. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  14. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  15. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back
  16. 16Bhagat, K. and Rudraraju, S., A numerical investigation of dimensionless numbers characterising meltpool morphology of the laser powder bed fusion process, arXiv:2211.06312, submitted 11 November 2022 (abstract page read; simulation study). arXiv, Ithaca. Observation year 2022. Accessed 2026-11-03.back
  17. 17Hong, G., Cho, J. and Cho, H., Neuro-symbolic closed-loop control of laser powder bed fusion with an in-loop ontology, arXiv:2608.05773, submitted 6 August 2026 (abstract page read; preprint, simulation only, not peer reviewed). arXiv, Ithaca. Observation year 2026. Accessed 2026-11-03.back
  18. 18Baumers, M. and Ozcan, E., Scope for machine learning in digital manufacturing, arXiv:1609.05835, submitted 19 September 2016 (abstract page read; position paper with no figures). arXiv, Ithaca. Observation year 2016. Accessed 2026-11-03.back
  19. 41DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T. et al., Additive manufacturing of metallic components: process, structure and properties, Progress in Materials Science 92, 112 to 224, March 2018 (Crossref record read; doi 10.1016/j.pmatsci.2017.10.001). Elsevier, Amsterdam. Observation year 2018. Accessed 2026-11-05. doi:10.1016/j.pmatsci.2017.10.001back
  20. 42Herzog, D., Seyda, V., Wycisk, E. and Emmelmann, C., Additive manufacturing of metals, Acta Materialia 117, 371 to 392, September 2016 (Crossref record read; doi 10.1016/j.actamat.2016.07.019). Elsevier, Amsterdam. Observation year 2016. Accessed 2026-11-05. doi:10.1016/j.actamat.2016.07.019back
  21. 40Gebler, M., Schoot Uiterkamp, A.J.M. and Visser, C., A global sustainability perspective on 3D printing technologies, Energy Policy 74, 158 to 167, November 2014 (Crossref record read; doi 10.1016/j.enpol.2014.08.033). Elsevier, Amsterdam. Observation year 2014. Accessed 2026-11-05. doi:10.1016/j.enpol.2014.08.033back
  22. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  23. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  24. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  25. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03.back
  26. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  27. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  28. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  29. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03.back
  30. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back
  31. 34Alexander Daniels Global (ed.), The 2026 additive manufacturing salary survey signals a shift toward operational maturity (article on 3DPrint.com, 13 January 2026, read: 10th edition of the survey; production the most in-demand discipline, with 75% of AM companies planning to hire in it; the survey report itself was not opened; recruiter survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.back
  32. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back

The 2027 agenda

Eight bounded questions open the 2027 additive manufacturing agenda. Each comes from a baseline finding, names the initiative that will carry it and the first output due in the 2027 additive manufacturing edition.

5 min read0 figures6 tables3 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

7.1Questions for the operational series

  1. M-01

    How fast can defence and aerospace qualify materials and processes, and what limits the rate?

    INI-XT13-QAL-01 · part acceptance; first output: part acceptance register by sector.

  2. M-02

    What do metal machines need in energy and inert gas per kilogram of part, on a common basis?

    INI-XT13-ENE-02 · process footprint; first output: footprint estimates by process.

  3. M-03

    How large is the supply of qualified metal powder, and where are the chokepoints?

    INI-XT13-PWD-03 · powder supply; first output: supply map.

  4. M-04

    Which machines, materials and software are single points of failure for production lines?

    INI-XT13-DEP-04 · dependence; first output: dependence map.

  5. M-05

    How can production claims, yield and scrap be compared on a common basis?

    INI-XT13-BMK-05 · claims on a common basis; first output: benchmark table.

  6. M-06

    Which national controls and strategies set rules for machines, feedstock and files, and how do they differ?

    To be admitted in 2027; first output: controls overlay.

  7. M-07

    What workforce exists for operating, qualifying and finishing additive parts?

    To be admitted in 2027; first output: scoping note.

  8. M-08

    Which readiness capabilities have been tested in real production, and which are only planned?

    Readiness capability register; first output: rung evidence for 15 functions.

7.2Portfolio proposed for the Q1 2027 alignment

Five initiatives and one Universe mission candidate are proposed for the 2027 additive manufacturing portfolio. They are programme objects: no partner, funder or member is attached to them in this edition.

Table 7.1Objects proposed for the first operational quarter
IDオブジェクト種別問い状況
INI-XT13-QAL-01Part acceptanceInitiativeM-01提案中
INI-XT13-ENE-02Process footprintInitiativeM-02提案中
INI-XT13-PWD-03Powder supplyInitiativeM-03提案中
INI-XT13-DEP-04DependenceInitiativeM-04提案中
INI-XT13-BMK-05Claims on a common basisInitiativeM-05提案中
MSN-XT13-2027-01Defence demand Universe mission使命M-01Candidate

7.3The pathway

The additive manufacturing edition reads national industrial readiness chapters, the coupled sector reports on infrastructure, minerals and supply chains, and the global edition through one governed evidence graph. At baseline the federation is designed; the global energy and lifeline editions are drafted. This page states what exists today and what comes next.

  1. 01

    National readiness chapters

    industrial and defence production readiness in each national edition

    IN PREPARATION · national baselines

  2. 02

    Sector couplings

    GS-02 energy · GS-09 infrastructure · SR-04 minerals

    GS-02 DRAFTED · sector baselines

  3. 03

    Technology system model

    machines, feedstock, energy, part acceptance, workforce, governance

    v0 SPECIFIED · v1 with federation evidence

  4. 04

    Strategic links

    SR-03 supply chains and chokepoints · SR-13 strategic technology

    PLANNED · strategic baselines

  5. 05

    ユニバース

    annual proving environment

    CANDIDATE MISSION · mandate in 2027

  6. 06

    XT-13 report

    this series

    BASELINE DRAFT · 2027 annual edition

  7. 07

    エビデンスと訂正

    one graph, many projections

    OPEN · first correction cycle in 2027

7.4Universe 2027: evidence pack for the additive manufacturing candidate mission

  1. 01

    任務

  2. 02

    Core Build · 1 month

  3. 03

    Action · 1 week

  4. 04

    Evidence seal

  5. 05

    Portfolio correction

  6. 06

    Next mandate

Table 7.2Universe 2027: evidence pack for the additive manufacturing candidate mission
項目記録状況時期
F1Annual mandate recordPLANNEDafter the Q2 2027 alignment
F2Core Build recordPLANNEDone month before the exercise
F3演習の証拠PLANNEDduring the Action week
F4Decision packetsPLANNEDexercise state only
F5Proof receiptsPLANNEDscoped to each recorded check
F6After-action reportPLANNEDwithin one quarter
F7Upgrade docketPLANNEDrouted to the Portfolio
F8Portfolio renewalPLANNED2027 global annual edition
F9Public synthesisPLANNEDpublic-safe extracts only

使命

ID
MSN-XT13-2027-01 · Defence demand Universe mission
Role spine
Leadership sponsor · Institutional anchor · Mission lead: drawn from national pathways
Receiving actors
to be identified with the mandate

7.5Handoffs and routing

Where the baseline’s findings go next. A handoff routes a finding for awareness, review or work; it transfers no authority.

Table 7.3Handoffs and routing
調査結果Routed to目的クラス
FIN-002 · market sizeINI-XT13-BMK-05claims on a common basisPUBLIC
FIN-003 · machine-maker resultsINI-XT13-DEP-04dependencePUBLIC
GOV-007 · Navy partsINI-XT13-QAL-01part acceptancePUBLIC
ENE-008 · process energyINI-XT13-ENE-02 · key F reviewprocess footprintPUBLIC
HLT-009 · powder exposureINI-XT13-ENE-02process footprintPUBLIC
GOV-010 · export controlsregional consortiacontrols overlayPUBLIC
INF-011 · benchmarksINI-XT13-BMK-05claims on a common basisPUBLIC
SYS-012 · compound pathwayMSN-XT13-2027-01Universe candidateCONSORTIUM
Table 7.4Routing rules by publication class
クラスWhere it goesWho can see it
PUBLICthe published edition and its evidence bundleanyone
CONSORTIUMgoverned rooms of the federationconsortium members under agreement
CONTROLLEDneed-to-know channelsnamed competent actors only

7.6Feeds and signal register

Table 7.5Feeds watched from 2027
FeedProducerLatencyFeeds into
Wohlers Report and trade presscommercial survey年次FIN-002
Listed company resultscompanies四半期ごとFIN-003
Navy and DoD releasesUS government事象ごとGOV-007
NIST additive manufacturing pagesNISTリリースごとINF-011
NIOSH evaluationsNIOSHリリースごとHLT-009
Federal Register export-control rulesBISper ruleGOV-010
Critical minerals outlookIEA年次MIN-010

Escalation routes

  • none · keep monitoring
  • research question
  • project
  • risk object
  • annual publication
  • signal report
Table 7.6Signals at baseline
IDSignalCorroborationシステムルート
SIG-XT13-001Revenue growth of 10.9% in 20252PARTIALFINresearch question M-05
SIG-XT13-002Machine-maker Chapter 11 filing in 20255CORROBORATEDFIN · INFinitiative M-04
SIG-XT13-003Navy parts installed in 20267PARTIALGOV · INFresearch question M-01

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  2. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  3. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back

Systems in depth

One section per system: its state at evidence close, its exposures and what the operational series will watch.

9 min read0 figures5 tables21 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

8.1Machines and process platforms

Additive machines span polymer and metal processes. Evidence is strongest where benchmark data and peer review exist, and weakest where claims rest on company announcements.

85submissions

AM-Bench 2025 challenge problems12

8metal sets

AM-Bench 2025 benchmark sets, plus 1 polymer12

30,000nozzle tips

printed by 2018 for one engine part6

Table 8.1State at baseline
構成要素状況エビデンスステータス
Laser powder bed fusionbenchmark data and melt pool studies; monitoring has open gaps121516報告値
Polymer laser sinteringprocess energy estimated at 113.66 MJ/kg on one platform14報告値
Wire-arc depositiona vendor announced a production order for submarine parts9報告値
Process controlclosed-loop control shown in simulation only17Inferred

連動

  • INF ↔ FIN machines and revenue
  • INF → GOV part acceptance and defence use
  • MIN → INF powder

Evidence to bind in 2027

  • production claims on a common basis
  • yield and scrap by process

Related editions

  • GLB Global Systems
  • GS-15 Science and Engineering Frontier
  • SR-04 Critical Minerals and Strategic Materials
  • SR-03 Global Supply Chains, Trade and Chokepoints
  • XT-12 Advanced Materials and Nanotechnology
  • XT-03 Robotics and Autonomous Systems

8.2Energy, inert gas and process footprint

Metal machines run under inert gas or vacuum and use laser or electron beam energy. Energy and gas use per kilogram of part is not published on a common basis.

113.66MJ/kg

polymer laser sintering, one platform14

156.10MJ/kg

one low-cost heat sintering platform14

107 to 144MJ/kg

earlier polymer laser sintering studies cited in14

Table 8.2State at baseline
構成要素状況エビデンスステータス
Polymer sintering energyone platform estimated; earlier studies in a similar range14報告値
Metal machine energynot bound on a common basis14Expert input
Inert gas use未公表14Expert input
Cooling water未公表14Expert input

連動

  • ENE ↔ INF facility power
  • WAT → INF cooling water
  • INF → CLI process footprint

Evidence to bind in 2027

  • metal machine energy and gas use
  • cooling-water use

Related editions

  • GLB Global Systems
  • GS-15 Science and Engineering Frontier
  • SR-04 Critical Minerals and Strategic Materials
  • SR-03 Global Supply Chains, Trade and Chokepoints
  • XT-12 Advanced Materials and Nanotechnology
  • XT-03 Robotics and Autonomous Systems

8.3Feedstock, materials and supply chain

Production use depends on powder, wire and resin qualified for each process and alloy. Volumes are not published, and supplier commentary is the main evidence.

250,000workers

Navy maritime industrial base need over a decade8

20parts

installed by the US Navy in a year7

0volumes bound

powder supply and demand, NOT BOUND

Table 8.3State at baseline
構成要素状況エビデンスステータス
Metal powdersuppliers report powder bottlenecks; volumes not bound33Inferred
Casting and forgingstrain on large castings named as a bottleneck for two submarine programmes7報告値
重要鉱物export controls and price rises affect alloy inputs25Inferred
Machine supplyone maker in Chapter 11 and two with lower 2025 revenue345報告値

連動

  • MIN → INF powder and alloys
  • TRD → INF export controls
  • FIN → INF machine supply

Evidence to bind in 2027

  • powder volumes
  • qualified sources per alloy

Related editions

  • GLB Global Systems
  • GS-15 Science and Engineering Frontier
  • SR-04 Critical Minerals and Strategic Materials
  • SR-03 Global Supply Chains, Trade and Chokepoints
  • XT-12 Advanced Materials and Nanotechnology
  • XT-03 Robotics and Autonomous Systems

8.4Economy, investment and workforce

Revenue grew in 2025, but growth sat in services and materials while machine sales were weak. Workforce numbers are the thin part of the evidence.

24.2USD billion

global revenue, 20252

15.5パーセント

growth in printing services, 20252

3.6パーセント

growth in machine sales, 20252

Table 8.4State at baseline
構成要素状況エビデンスステータス
Market revenueUSD 24.2 billion in 2025, up 10.9%, in a trade summary2報告値
Machine makerstwo listed makers reported lower 2025 revenue34報告値
ConsolidationChapter 11 filing in July 2025 and a Markforged purchase in April 20255報告値
労働力a Navy need of 250,000 skilled workers is stated; no additive figure bound8Expert input

連動

  • FIN → INF machine supply
  • FIN → DAT software and files
  • HLT → INF workforce

Evidence to bind in 2027

  • market figures from the reports
  • workforce size and skills gaps

Related editions

  • GLB Global Systems
  • GS-15 Science and Engineering Frontier
  • SR-04 Critical Minerals and Strategic Materials
  • SR-03 Global Supply Chains, Trade and Chokepoints
  • XT-12 Advanced Materials and Nanotechnology
  • XT-03 Robotics and Autonomous Systems

8.5Security, standards and governance watch

Additive manufacturing is governed through standards committees, defence policy, health guidance and export controls. Build files cross borders more easily than machines.

2021strategy

DoD additive manufacturing strategy10

2024rule

US interim final rule on metal machines22

2017paper

SIPRI on missile technology controls21

Table 8.5State at baseline
構成要素状況エビデンスステータス
標準ASTM F42 and ISO/TC 261 work; design guides published, feedstock re-use in draft11報告値
Defence policyDoD strategy of 2021 sets a common vision10報告値
Export controlsUS control on metal machines from 2024; SIPRI sets out the case for machines, feedstock and files2122報告値
Occupational healthNIOSH names inhalation, skin contact, fire and explosion hazards1920報告値

連動

  • INF → DAT build file exposure
  • GOV → TRD export controls
  • INF → HLT powder hazards

Evidence to bind in 2027

  • text of the 2024 rule
  • exposure data across facilities

Related editions

  • GLB Global Systems
  • GS-15 Science and Engineering Frontier
  • SR-04 Critical Minerals and Strategic Materials
  • SR-03 Global Supply Chains, Trade and Chokepoints
  • XT-12 Advanced Materials and Nanotechnology
  • XT-03 Robotics and Autonomous Systems

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  2. 6GE Aerospace (ed.), Manufacturing milestone: 30,000 additive fuel nozzles (company article, 4 October 2018; Auburn, Alabama; one piece replacing about 20; about 25% lighter; more than 40 printers; vendor announcement, weak evidence). GE Aerospace, Evendale. Observation year 2018. Accessed 2026-11-03.back
  3. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back
  4. 16Bhagat, K. and Rudraraju, S., A numerical investigation of dimensionless numbers characterising meltpool morphology of the laser powder bed fusion process, arXiv:2211.06312, submitted 11 November 2022 (abstract page read; simulation study). arXiv, Ithaca. Observation year 2022. Accessed 2026-11-03.back
  5. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  6. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03.back
  7. 17Hong, G., Cho, J. and Cho, H., Neuro-symbolic closed-loop control of laser powder bed fusion with an in-loop ontology, arXiv:2608.05773, submitted 6 August 2026 (abstract page read; preprint, simulation only, not peer reviewed). arXiv, Ithaca. Observation year 2026. Accessed 2026-11-03.back
  8. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  9. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  10. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back
  11. 25International Energy Agency (ed.), Global Critical Minerals Outlook 2026, revised version, July 2026 (full report opened; export controls announced, proposed or updated in 2025 and 2026 on tungsten, rare earths and other minerals; tungsten prices rose sixfold; aerospace and defence depend on cobalt, titanium, tungsten and yttrium; no figure used in copy). IEA, Paris. Observation year 2025. Accessed 2026-11-05.back
  12. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  13. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  14. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  15. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  16. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  17. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  18. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  19. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03.back
  20. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03.back
  21. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back

方法論

How the edition was made: methods, the model card, the evidence cut and its age, the acceptance record and the glossary.

15 min read0 figures13 tables20 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

A.1手法

The global baseline uses published values and four simple derivations. Each is shown in full so that any reader can reproduce it.

Table A.1Methods
No.DerivationCalculation結果
(1)Change in Stratasys revenue, 2025 over 2024551.1 ÷ 572.5 − 1−3.7%
(2)Navy parts installed as a share of parts placed into development20 ÷ 120about 17%, at least
(3)Services revenue implied by the 48% share0.48 × 24.2≈ USD 11.6 billion
(4)Growth implied by two rounded revenue values24.2 ÷ 21.9 − 110.5%, against 10.9% reported
Table A.2Coupling strength scale (matrix and model card)
Strength定義
STRONGa disruption in the source system has historically changed the target system’s service or output within one season, in more than one region
MODERATEan effect is documented but buffered or slower
WEAKan effect is plausible but not documented at global scale
Table A.3Status grammar
ラベル規則
報告値value as issued by its source, with year
Inferredreasoned from cited evidence; never a measurement
推定Nexus analytical value with stated method
シナリオconditional on stated assumptions
Expert inputstructured editorial judgement awaiting evidence

A.2Model card, Additive manufacturing System Model v0

Model ID
MDL-XT13-MANUFACTURING · v0.1
目的
represent additive and advanced manufacturing as production infrastructure coupled to energy, powder and gas supply, materials, finance, workforce, occupational health and export controls
ファミリー
graph-based system of systems
入力
the cited sources of this edition; no proprietary data
手法
expert-specified coupling strengths (STRONG · MODERATE · WEAK) from assessments and analogue events
検証
none yet, first validation against federation evidence in 2027
不確実性
qualitative; strengths are hypotheses, not measurements
有効性の適用範囲
global scale; not for asset-, site- or country-level use
再現性
strength table and sources published in this edition
20couplings

typed in v0

0strong

documented within one season

0moderate

documented, buffered

20weak

plausible, undocumented

A.3The baseline evidence cut

Every Nexus edition is published from a frozen evidence cut. The global baseline cut is documentary: it pins the exact edition of every source cited. Federation cuts begin with the first national Foundry cuts in 2027.

Cut ID
DC-XTECH-MANUFACTURING-GLOBAL-2026-B0
種類
baseline documentary cut
Resolution policy
pinned · as of 30 September 2026
Sources pinned
42 cited sources, each at the edition and access date in the references
Model runs
none at baseline, analytical values are stated with their method
Digest
computed at freeze and recorded in the publication record
Supersedes
nothing, first cut of the series
Superseded by
the 2027 additive manufacturing annual cut

系譜

  1. 01

    source edition

  2. 02

    pinned citation

  3. 03

    finding

  4. 04

    page

  5. 05

    publication record

Table A.4From the baseline cut to the federation cut
要素Baseline 20262027 global annual
出典cited global publications, pinned by editionnational, regional and sector cuts through one graph
Analysisstated methods and editorial estimatestyped analysis specifications
モデルAdditive manufacturing System Model v0 specificationmodel runs with receipts
調査結果twelve baseline findingsfindings re-bound to federation evidence
審査five passes scheduledfive passes on the exact digest

A.4Evidence age and coverage

A 2026 global edition rests on evidence observed in many different years. This page shows each time base, so that no single year label hides older evidence.

Table A.5Evidence age and coverage
指標観測公開済み周期Next release
Market size2025Feb 2026年次next Wohlers Report
Machine-maker results2025Mar 2026四半期ごとnext results
Machine-maker Chapter 112025Jul 2025事象ごとsale outcomes
Navy parts counts2026Jun 2026事象ごとnext Navy report
AM-Bench2025Nov 2025every three yearsAM Bench 2028
Reference model2024Jul 2024定期的revision
Energy estimate20152015one-offnew studies
NIOSH evaluation2025Feb 2025事象ごとfurther evaluations
Table A.6Coverage by system at baseline
システム対象範囲Thinnest dimension
MarketPARTIALmarket figures from the reports
DefencePARTIALindependent review of counts
標準GOODtext of work items
エネルギーTHINmetal machine energy
SupplyTHINpowder volumes
技能THINworkforce numbers
Health and safetyPARTIALexposure across facilities
管理策PARTIALlicensing and enforcement data
Table A.7Designed empty states: what is not bound, what would fill it and why
分野Source that would fill itBlocker
Wohlers Report market figures from the reports themselvesWohlers Report 2025 and 20262324the reports are subscription products; figures come from a publisher release23 and trade summaries12
Specific energy and inert gas use of metal machines on a common basispeer-reviewed footprint studiesmetal studies3132 give values that vary with geometry, orientation and capacity use, such as 20.3 to 30.5 MJ/kg in one simulation; no common basis
Metal powder supply and demand volumespowder producers, trade statisticsonly supplier commentary found; it gives no volumes33
Part acceptance rates, yield and scrap by process and sectoroperators, defence programmes, standards committeesnot published on a common basis
Machine-maker impairments and order books from the filingscompany filings and results releases30only one release read: a USD 251 million goodwill impairment at Colibrium Additive in 202430
Installed base and utilisation of machines by countryindustry and trade statisticsnot retrieved
China additive manufacturing output from official statisticsnational statistics37the statistics bureau gives growth only, 52.5% in 2025, and no unit or value total37
Licences and amendments under the 2024 BIS interim final ruleFederal Register28rule text read; licensing data not published
Independent review of Navy additive parts counts and lead-time figuresGAO, inspector general or academic reviewofficial releases only78
Navy part acceptance requirements for printed metal partsNavy technical publicationsnot read; only a news feature on SUBSAFE qualification26
Additive manufacturing workforce size and skills gapsnational statistics, industry surveys343536not retrieved; capability rung stays LISTED
Medical and dental additive device volumesFDA, regulators, industry bodies27not retrieved; no figure used
Construction and consumer additive manufacturing dataagencies, industry bodiesnot retrieved; no figure used
Exposure data from facilities other than one NIOSH evaluationoccupational health agenciesone evaluation read20
Capability rungs beyond standards and planningagencies, operators, laboratoriesnot reviewed

A.5Evidence cards, two anchor sources

Published by NIST as a continuing benchmark series with a 2025 conference. 8 metal and 1 polymer benchmark sets and 85 challenge submissions. Role: binds INF-011. Coverage: controlled measurements, not production data.

EVD-XT13-001

NIST AM-Bench 202512

Issued by a US Navy command through DVIDS. Official release. Role: binds GOV-007 and the defence tile. Coverage: one navy programme.

EVD-XT13-002

NAVSUP Weapon Systems Support release of 30 June 20267

Table A.8Quality dimensions at baseline
DimensionEVD-XT13-001EVD-XT13-002
Completenessmetals and polymers; one conference cycleone navy programme; counts only
Timelinessconference in November 2025released June 2026
Revisiondata archived for public useno revision history on the page
Method transparencymethods and data publishedcounts without method
External validationblind challenge problemsnone stated

Evidence cards to follow in 2027

  • Wohlers Report2324: the reports themselves
  • Navy7: independent review of counts and lead times
  • BIS28: licences under the rule
  • Suppliers and agencies33: powder volumes

A.6Publication acceptance record

Editorial self-check at evidence close. Every applicable item carries a disposition; the remaining items are review, approval and deposit.

Table A.9Publication acceptance record
グループエリア項目合格N/A保留中
D1Identity and scope8800
D2Source and data12912
D3Analysis and models12381
D4Findings and claims9801
D5Figures, tables, maps10622
D6Editorial and citations10802
D7Review and approval130013
D8Artefact and design12705
D9Registry and release9009

Publication gate

Conditions met
14 of 23 at evidence close
Blocking problems
none recorded
Open conditions
reviews, approval of the exact digest, deposit, registry pointer

Not applicable at baseline

Model runs
first runs in Q1 2027
地図
plates in Q2 2027
Waivers
なし

A.7Status words

Table A.10The status every value carries
ステータス意味
観測Measured directly and published by the source.
報告値Published statistics of an official or institutional source.
申告済みStated by the body concerned; not independently measured.
推定A Nexus estimate from cited evidence, with its method in Annex A.
モデル化Produced by a stated model from cited inputs.
InferredReasoned from cited evidence; not measured.
予報A projection by the cited source.
SimulatedA simulation result under stated assumptions.
シナリオA conditional statement under stated assumptions; never a prediction.
Expert inputExpert judgement, recorded with its basis.
CandidateProposed for a later edition; not yet evidence.
Evidence-quality levels (EQL 1 to 5) grade the source behind a value; they are not a score of the subject.

A.8How the edition is made, released and corrected

Every edition is built from a sealed evidence cut, reviewed under three keys, signed and deposited before any site shows it as published; corrections go to Nexus Standards as change proposals and feed the next cut.

ステップ何が起きるか出典
01 Evidence arrives from the pillarsFoundry seals observations and indicator series, Universe hands over after-action and scenario findings, and contributions are screened at every gateway, including this site’s.
02 The cut is sealedOn the cut date the evidence is pinned under one identifier, so anyone can rebuild the edition from exactly what it was built on.
03 The edition is assembledThe edition is drafted from its template and content pack. Agents may draft; they never publish and never decide.
04 The keys turnAt the publisher of record the truth key comes first: every value is checked against its source or stated method before the meaning and capital keys turn. No edition moves on until every key has been turned by a named steward.
05 The gate opensA named approver releases one exact digest of the edition; any change after this point is a new version, never a silent edit.
06 Signed and depositedThe PDF, the web edition and the data bundle are signed together with a manifest and an RO-Crate description, and deposited on Zenodo with a concept and a version DOI.
07 Published on its desk’s siteOnly then does the edition show as published on its desk’s Reports site, and the Collection lists it as a part.
08 Corrections go to StandardsMethod and correction findings go to Nexus Standards as change proposals; citations, corrections and new contributions feed the next evidence cut.

A teaching model of the process, not a forecast and not a record of any run; dates and counts on this page come from the programme record. Sources: Reports governance at GCRI Canada (2026); Zenodo, repository of record for Reports deposits (2026).

Lifecycle, one state at a time: Draft, Computed, Evidence bound, Reviewed, Approved for release, Published, Corrected, Superseded. This edition is a draft.

A.9Glossary and abbreviations

Table A.11Series terms
用語意味
Baseline Editionthe inaugural annual edition that fixes the reference state for the series
WEFH+Bwater, energy, food, health and biodiversity, the national nexus core
結合a typed dependency through which one system transmits to another
保障ギャップthe share of losses not covered by insurance
Capability ladderLISTED → EXISTS → ADEQUATE → TESTED → DEMONSTRATED
EQLevidence-quality level, 1–5
証拠の区切りa frozen resolution of exact sources and versions
NNC・NLC・NWGNational Nexus Consortium · National Leadership Council · National Working Groups
Table A.12Abbreviations used in this edition
AbbreviationExpansion
AMadditive manufacturing
AM-BenchNIST additive manufacturing benchmark series
AMSNIST Advanced Manufacturing Series
BISUS Bureau of Industry and Security
DEDdirected energy deposition
ECCNExport Control Classification Number
IDEF0integration definition for function modelling
LPBFlaser powder bed fusion
NAVSEAUS Naval Sea Systems Command
NIOSHUS National Institute for Occupational Safety and Health
PBFpowder bed fusion
WAAMwire-arc additive manufacturing

A.10Technical annex

Table A.13Technical annex
項目Annex目次ステータス
A.1Indicator definitionsthe global indicator set, with units and sourcesIN THIS EDITION
A.2Coupling strengthsthe twenty-cell matrix and its rationaleIN THIS EDITION
A.3Scenario specificationSCN-XT13-QAL-01 assumptions and signpostsIN THIS EDITION
A.4Capability placementsrung evidence for fifteen functionsIN THIS EDITION
A.5Model diagnosticsfirst runs and validation2027
A.6感度分析influence of coupling strengths2027
A.7Cluster notescards for the major additive manufacturing and powder clusters2027
A.8Review statementspass-by-pass review recordAT RELEASE

A.1 · indicator definition: specific energy consumption

Construct
process energy used per kilogram of material deposited in a build
単位
megajoules per kilogram
手法
energy metering over build experiments, with volume converted to mass by an assumed density
出典
Baumers, Tuck and Hague, 201514
不確実性
estimated; depends on build packing and capacity utilisation
既知の限界
polymer platforms only; not comparable with metal machines or with cool-down and post-processing energy

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 23Wohlers Associates, powered by ASTM International (ed.), 3D printing and AM market grows 9.1% according to Wohlers Report 2025 (press release, Washington, 29 April 2025, distributed by PR Newswire and read in full on a republishing page; the report has been published for 30 consecutive years; global AM industry grew 9.1% to USD 21.9 billion; growth mostly in Asia and China; system makers declined while services, software and materials grew; the report itself was not opened). Wohlers Associates, Washington. Observation year 2024. Accessed 2026-11-05.back
  2. 24Wohlers Associates (ed.), Wohlers Report 2026 (report overview page on the Wohlers platform read: released 17 February 2026; the page gives no figures and the report itself, a subscription product, was not opened; the figures used come from the trade summary [2]). Wohlers Associates, Washington. Observation year 2025. Accessed 2026-11-05.back
  3. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  4. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  5. 31Kota, A., Nallagundla, V.R., Assuad, C.S.A., Martinsen, K. and Simhambhatla, S., Parametric investigation, formulation, and benchmarking of energy consumption for the powder bed fusion process, Cleaner and Responsible Consumption 14, 100205, September 2024 (Crossref record and abstract read: total energy per part falls by up to 32.68% with higher capacity use and by 50% with a changed part orientation; doi 10.1016/j.clrc.2024.100205). Elsevier, Amsterdam. Observation year 2024. Accessed 2026-11-05. doi:10.1016/j.clrc.2024.100205back
  6. 32Gee, K. and Hart, A.J., Parametric analysis of relationships among part geometry, build time, and energy consumption for laser powder bed fusion, ASME 2024 International Design Engineering Technical Conferences, 29th Design for Manufacturing and the Life Cycle Conference, V005T05A004, August 2024 (Crossref record and abstract read: specific energy consumption of 20.3 to 30.5 MJ/kg for fifteen 100 g AlSi10Mg parts on a simulated machine; doi 10.1115/DETC2024-142824). American Society of Mechanical Engineers, New York. Observation year 2024. Accessed 2026-11-05. doi:10.1115/DETC2024-142824back
  7. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back
  8. 30GE Aerospace (ed.), GE Aerospace announces third quarter 2024 results (company release, 22 October 2024, read: interim impairment test at the Colibrium Additive reporting unit, given declines in the additive manufacturing industry due to slower adoption of the technology, gave a non-cash goodwill loss of USD 251 million). GE Aerospace, Evendale. Observation year 2024. Accessed 2026-11-05.back
  9. 37National Bureau of Statistics of China (ed.), National economy pushed forward with innovation-led and high-quality development and expected targets achieved successfully in 2025 (press release, 19 January 2026, read: production of 3D printing devices grew 52.5% in 2025; no unit or value total given). NBS, Beijing. Observation year 2025. Accessed 2026-11-05.back
  10. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05.back
  11. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  12. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  13. 26LaGrone, S., The Navy’s big 3-D printing bet (feature, USNI News, 23 June 2026; full text read through the publisher’s public feed: the Additive Manufacturing Center of Excellence in Danville, Virginia, opened in 2023 with USD 35 million from Virginia; wider use of printed parts is limited by Navy part acceptance rules, contract language and design rights; SUBSAFE qualification under way). US Naval Institute, Annapolis. Observation year 2026. Accessed 2026-11-05.back
  14. 34Alexander Daniels Global (ed.), The 2026 additive manufacturing salary survey signals a shift toward operational maturity (article on 3DPrint.com, 13 January 2026, read: 10th edition of the survey; production the most in-demand discipline, with 75% of AM companies planning to hire in it; the survey report itself was not opened; recruiter survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.back
  15. 35VonBank, D., What the 2026 post-processing survey reveals about the future of AM (article on 3DPrint.com, 24 March 2026, read: fifth edition of the PostProcess Technologies survey; time and labour to finish parts named as a main constraint on scaling; the survey report itself was not opened; vendor survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.back
  16. 36Kirchain, R., Moore, E. and Field, F., Preparing the advanced manufacturing workforce: a study of occupation and skills demand in the 3D/additive manufacturing industry, Workforce Roadmap series, June 2022 (repository record read; interviews on middle-skilled technical occupations). Massachusetts Institute of Technology, Cambridge. Observation year 2022. Accessed 2026-11-05.back
  17. 27Food and Drug Administration (ed.), Technical considerations for additive manufactured medical devices: guidance for industry and Food and Drug Administration staff, issued 5 December 2017 (guidance document opened; draft issued 10 May 2016; notice of availability 82 FR 57462). FDA, Silver Spring. Observation year 2017. Accessed 2026-11-05.back
  18. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  19. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  20. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back

Data appendix

The indicator set with its sources, the source registers, the licences of every kind of material and the formats of the edition.

9 min read0 figures8 tables14 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

B.1The indicator set

Table B.1Global baseline indicator set
指標値単位年状況出典
Global additive manufacturing revenue21.9USD billion2024報告値1
Growth in revenue9.1パーセント2024報告値1
Decline in machine sales26パーセント2024報告値1
Share of revenue from printing services47パーセント2024報告値1
Global additive manufacturing revenue24.2USD billion2025報告値2
Growth in revenue10.9パーセント2025報告値2
Growth in printing services15.5パーセント2025報告値2
Growth in machine sales3.6パーセント2025報告値2
Growth in Asia-Pacific19.8パーセント2025報告値2
Stratasys revenue551.1USD million2025報告値3
3D Systems revenue386.9USD million2025報告値4
Navy additive parts installed20parts2026報告値7
Navy lead-time cut for some components70percent, up to2026報告値7
Specific energy, polymer laser sintering113.66MJ/kg2015報告値14
AM-Bench 2025 challenge submissions85submissions2025報告値12
Navy maritime industrial base workforce need250,000workers2025報告値8

B.2Global source register

The governed source set behind this edition. Each source keeps its authority, coverage, cadence and role; categories describe origin, not truth.

Domains bound by the register

  • INF
  • FIN
  • GOV
  • MIN
  • ENE
  • HLT
  • TRD
  • CLI
  • DAT
  • WAT
Table B.3Global source register
出典カテゴリー対象範囲Period周期役割
Trade summary of Wohlers Report 20251trade pressglobal2024年次market size
Trade summary of Wohlers Report 20262trade pressglobal2025年次market size and regions
Stratasys release3listed companyone company2025四半期ごとresults
3D Systems release4listed companyone company2025四半期ごとresults
Nano Dimension filing5listed companyone company2025年次consolidation
DVIDS release7US governmentUS Navy2026事象ごとparts counts
NIST AM-Bench12national standards body方法2025every three yearsbenchmarks
Baumers et al.14conference paper方法2015one-offenergy
NIOSH evaluation20US government via trade pressone facility2025事象ごと曝露
SIPRI paper21research instituteglobal2017one-offcontrols

B.3Regional reading, additive manufacturing across ten clusters

Regional plates follow with the regional editions. This page gives the regional reading of additive manufacturing production and exposure in table form and ranks no region.

Table B.4Regional reading, additive manufacturing across ten clusters
地域Principal hazardsSystems most exposedBaseline evidence
北米defence demand; export controls; machine makers under strainproduction, supplyNavy7; company results34
南アメリカearly industrial useproductionregional evidence (not bound)
ヨーロッパrevenue growth of 9% in 2025production, researchtrade summary2
Eurasiadefence and research programmesresearch, supplyregional evidence (not bound)
中東・北アフリカearly industrial useproductionregional evidence (not bound)
アフリカskills and accessworkforceregional evidence (not bound)
南アジアnational manufacturing programmesproduction, skillsregional evidence (not bound)
東アジアfastest regional growth; machine exportsproduction, supplytrade summary2
ASEANfabrication partnersproduction, supplyregional evidence (not bound)
Oceania-Pacificwire-arc and metal programmes for defenceproductioncompany announcement9

B.4Cluster card: metal powder and qualified alloy supply chain

  • supply chain
  • metal powder
  • part acceptance
  • single point
Systems in view
powder producers, machine makers, part acceptance programmes, defence primes
Defining events
defence demand growth and the 2024 US machine control722
連動
MIN → INF powder; TRD → MIN controls
Capability evidence
supplier commentary on powder bottlenecks33
ギャップ
powder volumes; reserves; qualified sources per alloy
Agenda items
M-03 · M-04

Production use needs powder qualified for each alloy and process, and volumes are not published [33].

SUPPLY

Qualified powder per alloy

The US Navy reports additive parts moving into production and cites strain on casting and forging [7].

DEMAND

Defence pull

Reported responses include supplier offers of assured powder supply and part acceptance of processes rather than parts. None is documented at scale here [7] [33].

RESPONSE

Capacity and part acceptance

B.5How countries appear in the additive manufacturing edition

Countries enter the additive manufacturing edition through the readiness chapters of their own national editions, on one card grammar. They are read against peer distributions and thresholds, never ranked.

Table B.5How countries appear in the additive manufacturing edition
Card field表示内容出典
WEFH+B stateeach core system against peer distribution bandsnational edition
連動the national dependency matrixnational edition
Risk objectsthe national risk portfolionational edition
Capability rungsthe national capability laddernational edition
Evidence ageoldest and newest source datesnational source register

Editions in the 2026 Baseline programme

26国

countries and unions

10regional

clusters

16global

flagship and sector

14strategic

システム レポート

20frontier

technology reports

How to read a country card

  • Each system is shown against the distribution of its peers, with thresholds where they exist
  • Couplings and risk objects come from the country’s own national edition
  • Capability rungs record evidence, not a judgement of institutions
  • Evidence age is printed, so older national data are visible as such
Table B.6National Baseline Editions in the 2026 programme
ウェーブCountries and unions状況
W0カナダISSUED
W1United States, United Kingdom, France, Germany, Italy, Japan, European Union, SwitzerlandPLANNED
W2Mexico, Brazil, Argentina, Türkiye, Russian Federation, Saudi Arabia, United Arab Emirates, South Africa, Senegal, Kenya, African Union, India, China, Republic of Korea, Indonesia, Singapore, AustraliaPLANNED

B.6ライセンス

Table B.7Licences of each kind of material
資料ライセンス
TextCC BY 4.0
データon the licence of each source; Nexus tables CC BY 4.0
数字Nexus figures CC BY 4.0; third-party as credited
地図boundary source and licence printed on each plate
メタデータCC0 1.0, as Zenodo publishes it
Third-party data, figures and textThe source’s own licence, credited where it is used; never relicensed
Nexus-authored text, tables and figures: CC BY 4.0 (SPDX CC-BY-4.0). Map plates print their boundary source and licence.

B.7Formats and provenance

Table B.8This edition in every format
形式種別状況概要識別子
Web editionHTMLこのサイトDraft in stewardship review; every value resolves to its source.NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Print editionPDFAt releaseA4 portrait · screen, print and archival PDF, signed with the web edition at release.NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Indicator dataCSV · JSONこのサイト16 indicators with unit, year, status and source; the machine-readable copy ships with the evidence bundle at release.NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE data release v1
数字SVG · PNGこのサイト4 on the web edition: headline figure, figure 1.3, coupling instrument, capability ladder.FIG-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-*
SlidesPDF記録なしNo slide deck is recorded for this edition.
エビデンス・ブリーフHTML · PDF記録なしNo evidence brief is recorded for this edition.
Dataset with DOIDataCiteAt releaseConcept and version DOI are minted at deposit; none is recorded yet.

来歴

Edition pack
The edition’s content pack (JSON), from which the print and web editions are built
証拠の区切り
DC-XTECH-MANUFACTURING-GLOBAL-2026-B0, closed 30 September 2026
再現性
sourced values cited; analytical values reproducible from stated parameters
Self-check
14 of 23 at evidence close; a fail on any item blocks release
審査
five passes scheduled before release (in Annex C)
正式な発行者
GCRI for the Nexus Consortium
訂正
Registry correction pathway; upheld corrections are published as notices with a new version

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  2. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  3. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  4. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  5. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  6. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  7. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  8. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  9. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  10. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  11. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  12. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03.back
  13. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  14. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back

References and record

Every source the edition rests on, the publication record, the corrections log and the open record.

16 min read0 figures1 table0 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

C.142 sources

NR-CIT-1, editor first. A DOI is linked where the source has one; Nexus records carry a UNI once the catalogue allocates it (NS-1).

  1. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03. Cited in chapter 1, chapter 2, chapter 6
  2. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 7, chapter 8
  3. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  4. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  5. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 4, chapter 5, chapter 6, chapter 7, chapter 8
  6. 6GE Aerospace (ed.), Manufacturing milestone: 30,000 additive fuel nozzles (company article, 4 October 2018; Auburn, Alabama; one piece replacing about 20; about 25% lighter; more than 40 printers; vendor announcement, weak evidence). GE Aerospace, Evendale. Observation year 2018. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 8
  7. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 7, chapter 8
  8. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 2, chapter 4, chapter 6, chapter 8
  9. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03. Cited in chapter 6, chapter 8
  10. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03. Cited in chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  11. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03. Cited in chapter 1, chapter 4, chapter 6, chapter 8
  12. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  13. 13Gibbons, D.W. and Witherell, P.W., A reference activity model for additive manufacturing: powder bed fusion, NIST AMS 100-60, July 2024 (front matter and abstract read). National Institute of Standards and Technology, Gaithersburg. Observation year 2024. Accessed 2026-11-03. Cited in chapter 3, chapter 4, chapter 6
  14. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 6, chapter 8
  15. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03. Cited in chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  16. 16Bhagat, K. and Rudraraju, S., A numerical investigation of dimensionless numbers characterising meltpool morphology of the laser powder bed fusion process, arXiv:2211.06312, submitted 11 November 2022 (abstract page read; simulation study). arXiv, Ithaca. Observation year 2022. Accessed 2026-11-03. Cited in chapter 4, chapter 6, chapter 8
  17. 17Hong, G., Cho, J. and Cho, H., Neuro-symbolic closed-loop control of laser powder bed fusion with an in-loop ontology, arXiv:2608.05773, submitted 6 August 2026 (abstract page read; preprint, simulation only, not peer reviewed). arXiv, Ithaca. Observation year 2026. Accessed 2026-11-03. Cited in chapter 6, chapter 8
  18. 18Baumers, M. and Ozcan, E., Scope for machine learning in digital manufacturing, arXiv:1609.05835, submitted 19 September 2016 (abstract page read; position paper with no figures). arXiv, Ithaca. Observation year 2016. Accessed 2026-11-03. Cited in chapter 6
  19. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03. Cited in chapter 2, chapter 4, chapter 6, chapter 8
  20. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  21. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03. Cited in chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  22. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 5, chapter 6, chapter 8
  23. 23Wohlers Associates, powered by ASTM International (ed.), 3D printing and AM market grows 9.1% according to Wohlers Report 2025 (press release, Washington, 29 April 2025, distributed by PR Newswire and read in full on a republishing page; the report has been published for 30 consecutive years; global AM industry grew 9.1% to USD 21.9 billion; growth mostly in Asia and China; system makers declined while services, software and materials grew; the report itself was not opened). Wohlers Associates, Washington. Observation year 2024. Accessed 2026-11-05. Cited in chapter 2
  24. 24Wohlers Associates (ed.), Wohlers Report 2026 (report overview page on the Wohlers platform read: released 17 February 2026; the page gives no figures and the report itself, a subscription product, was not opened; the figures used come from the trade summary [2]). Wohlers Associates, Washington. Observation year 2025. Accessed 2026-11-05.
  25. 25International Energy Agency (ed.), Global Critical Minerals Outlook 2026, revised version, July 2026 (full report opened; export controls announced, proposed or updated in 2025 and 2026 on tungsten, rare earths and other minerals; tungsten prices rose sixfold; aerospace and defence depend on cobalt, titanium, tungsten and yttrium; no figure used in copy). IEA, Paris. Observation year 2025. Accessed 2026-11-05. Cited in chapter 1, chapter 4, chapter 8
  26. 26LaGrone, S., The Navy’s big 3-D printing bet (feature, USNI News, 23 June 2026; full text read through the publisher’s public feed: the Additive Manufacturing Center of Excellence in Danville, Virginia, opened in 2023 with USD 35 million from Virginia; wider use of printed parts is limited by Navy part acceptance rules, contract language and design rights; SUBSAFE qualification under way). US Naval Institute, Annapolis. Observation year 2026. Accessed 2026-11-05. Cited in chapter 6
  27. 27Food and Drug Administration (ed.), Technical considerations for additive manufactured medical devices: guidance for industry and Food and Drug Administration staff, issued 5 December 2017 (guidance document opened; draft issued 10 May 2016; notice of availability 82 FR 57462). FDA, Silver Spring. Observation year 2017. Accessed 2026-11-05. Cited in chapter 6
  28. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05. Cited in the summary, chapter 2, chapter 6
  29. 29Department of Defense (ed.), DoD Instruction 5000.93, Use of additive manufacturing in the DoD, June 2021 (announcement of the Office of the Under Secretary of Defense for Research and Engineering, 25 June 2021, read: establishes policy, assigns responsibilities and gives guidance on acquisition, part acceptance, data, security, standards and training; the instruction text host refused automated access). DoD, Washington. Observation year 2021. Accessed 2026-11-05. Cited in chapter 6
  30. 30GE Aerospace (ed.), GE Aerospace announces third quarter 2024 results (company release, 22 October 2024, read: interim impairment test at the Colibrium Additive reporting unit, given declines in the additive manufacturing industry due to slower adoption of the technology, gave a non-cash goodwill loss of USD 251 million). GE Aerospace, Evendale. Observation year 2024. Accessed 2026-11-05.
  31. 31Kota, A., Nallagundla, V.R., Assuad, C.S.A., Martinsen, K. and Simhambhatla, S., Parametric investigation, formulation, and benchmarking of energy consumption for the powder bed fusion process, Cleaner and Responsible Consumption 14, 100205, September 2024 (Crossref record and abstract read: total energy per part falls by up to 32.68% with higher capacity use and by 50% with a changed part orientation; doi 10.1016/j.clrc.2024.100205). Elsevier, Amsterdam. Observation year 2024. Accessed 2026-11-05. doi:10.1016/j.clrc.2024.100205
  32. 32Gee, K. and Hart, A.J., Parametric analysis of relationships among part geometry, build time, and energy consumption for laser powder bed fusion, ASME 2024 International Design Engineering Technical Conferences, 29th Design for Manufacturing and the Life Cycle Conference, V005T05A004, August 2024 (Crossref record and abstract read: specific energy consumption of 20.3 to 30.5 MJ/kg for fifteen 100 g AlSi10Mg parts on a simulated machine; doi 10.1115/DETC2024-142824). American Society of Mechanical Engineers, New York. Observation year 2024. Accessed 2026-11-05. doi:10.1115/DETC2024-142824
  33. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05. Cited in chapter 4, chapter 6, chapter 8
  34. 34Alexander Daniels Global (ed.), The 2026 additive manufacturing salary survey signals a shift toward operational maturity (article on 3DPrint.com, 13 January 2026, read: 10th edition of the survey; production the most in-demand discipline, with 75% of AM companies planning to hire in it; the survey report itself was not opened; recruiter survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05. Cited in chapter 6
  35. 35VonBank, D., What the 2026 post-processing survey reveals about the future of AM (article on 3DPrint.com, 24 March 2026, read: fifth edition of the PostProcess Technologies survey; time and labour to finish parts named as a main constraint on scaling; the survey report itself was not opened; vendor survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.
  36. 36Kirchain, R., Moore, E. and Field, F., Preparing the advanced manufacturing workforce: a study of occupation and skills demand in the 3D/additive manufacturing industry, Workforce Roadmap series, June 2022 (repository record read; interviews on middle-skilled technical occupations). Massachusetts Institute of Technology, Cambridge. Observation year 2022. Accessed 2026-11-05.
  37. 37National Bureau of Statistics of China (ed.), National economy pushed forward with innovation-led and high-quality development and expected targets achieved successfully in 2025 (press release, 19 January 2026, read: production of 3D printing devices grew 52.5% in 2025; no unit or value total given). NBS, Beijing. Observation year 2025. Accessed 2026-11-05.
  38. 38ISO and ASTM International (eds.), ISO/ASTM 52900:2021, Additive manufacturing, general principles, fundamentals and vocabulary, published 16 November 2021 by ISO/TC 261 (ISO open data deliverables record read; replaces the 2015 edition; confirmed at systematic review). ISO, Geneva. Observation year 2021. Accessed 2026-11-05. Cited in chapter 6
  39. 39ISO and ASTM International (eds.), ISO/ASTM 52920:2023, Additive manufacturing, qualification principles, requirements for industrial additive manufacturing processes and production sites, published 29 June 2023 by ISO/TC 261 (ISO open data deliverables record read). ISO, Geneva. Observation year 2023. Accessed 2026-11-05. Cited in chapter 6
  40. 40Gebler, M., Schoot Uiterkamp, A.J.M. and Visser, C., A global sustainability perspective on 3D printing technologies, Energy Policy 74, 158 to 167, November 2014 (Crossref record read; doi 10.1016/j.enpol.2014.08.033). Elsevier, Amsterdam. Observation year 2014. Accessed 2026-11-05. doi:10.1016/j.enpol.2014.08.033 Cited in chapter 6
  41. 41DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T. et al., Additive manufacturing of metallic components: process, structure and properties, Progress in Materials Science 92, 112 to 224, March 2018 (Crossref record read; doi 10.1016/j.pmatsci.2017.10.001). Elsevier, Amsterdam. Observation year 2018. Accessed 2026-11-05. doi:10.1016/j.pmatsci.2017.10.001 Cited in chapter 6
  42. 42Herzog, D., Seyda, V., Wycisk, E. and Emmelmann, C., Additive manufacturing of metals, Acta Materialia 117, 371 to 392, September 2016 (Crossref record read; doi 10.1016/j.actamat.2016.07.019). Elsevier, Amsterdam. Observation year 2016. Accessed 2026-11-05. doi:10.1016/j.actamat.2016.07.019 Cited in chapter 6

C.2Publication record

公開

タイトル
Exponential Technology Report 2026: Additive and Advanced Manufacturing, Baseline Edition
シリーズ
Reports · Exponential Technology Series XT-13
版
Baseline Edition 2026 · inaugural annual
バージョン
v1.0.0 · draft for stewardship review
Publication ID
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
エビデンス締め切り
30 September 2026
Publication date
2026 年 10 月
DOI
concept and version DOI at deposit

発行者

正式な発行者
The Global Centre for Risk and Innovation (GCRI), for the Nexus Consortium
場所
Toronto
編集者
Saeed Valadbaygi, Chief Steward and Managing Editor
スチュワード
GCRI · technical truth · GRF · public meaning · GRA · capital meaning
ライセンス
text CC BY 4.0; data on the terms of each source
Copyright
© 2026 GCRI · Nexus Consortium
言語
English (en-GB) source edition
Correspondence
Registry correction pathway · editorial office

Colophon

形式
A4 portrait · screen, print and archival PDF
Typefaces
Space Grotesk (display) · Geist (text) · IBM Plex Sans Italic (standfirsts) · IBM Plex Mono (data)
Design standard
Reports Foundational Edition, Volume I, Part VII
アクセシビリティ
tagged PDF and HTML targets; text alternatives for every figure
生産
Reports editorial team, GCRI

Release path for this version

Table C.1Release path for this version
ステップ何が起きるかいつ
草案editorial self-check complete at evidence close2026 年 10 月
Steward reviewfive passes on the exact draft (keys T · M · F · N)Q4 2026
承認publication authority approves the exact digestbefore release
Depositconcept and version DOI minted; registry pointer setat release
承継the 2027 additive manufacturing edition reports changes against this baseline2027
Current version
v1.0.0 draft, stewardship review
Previous edition
none, first edition of the series
Next edition
NR-XTECH-MANUFACTURING-GLOBAL-2027-v1.0.0
Latest version
resolve the concept DOI or the registry record
Correction route
Registry correction pathway
Notice types
erratum · addendum · supersession · withdrawal

C.3訂正履歴

0correction notices. No edition has been released yet, so none can be corrected; the log below lists each edition’s current version.

版バージョン日付状況変化通知
XT-13NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.02026 年 10 月草案Baseline Edition 2026, inaugural annual edition,なし

Notice types: erratum, addendum, supersession, withdrawal. A correction is a new version with a published notice; the earlier version stays resolvable, and no edition is ever edited in silence.

C.4Open record

This edition’s open record

Publication ID
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Desk identifier and series alias
NR-GCRI-XT-13-2026-BASELINE-v1.0.0 · NR-XTC-XT-13-2026-BL
Collection
NR-COL-2026-BASELINE (IsPartOf at deposit)
DOI
Concept and version DOI at deposit, on Zenodo with DataCite metadata
版
Each correction is a new version (isNewVersionOf); the concept DOI resolves to the latest
Bundle
RO-Crate 1.2 with CITATION.cff, CodeMeta and PROV-O provenance; a signed manifest
ライセンス
CC BY 4.0 (SPDX CC-BY-4.0) for original material; metadata CC0 1.0

Credit and identity

ORCID
Your iD in the deposit and the contribution record; DataCite can then add the work to your ORCID record
ROR
Your organisation by its ROR identifier, never by a typed name alone
CRediT
Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Validation, Visualisation, Writing, review and editing
アカウント
None needed to contribute; never a password

Find and follow

Search the open indexes for Additive and Advanced Manufacturing; software is cited by its SWHID from Software Heritage, and a quantified scenario run is preregistered on OSF before it is run. Annotation is your choice: Hypothesis opens this page in its own viewer.

Mirrors and harvest

The DOI is canonical. At release each signed bundle is also given an IPFS content identifier and a bloxberg anchor as mirrors; both are listed in the record once they exist. Zenodo exposes every record over OAI-PMH, and reviews and endorsements can arrive through COAR Notify where the repository supports it.

InvenioRDM metadata for a contribution on Additive and Advanced Manufacturing, prefilled from this page
{
  "metadata": {
    "resource_type": {
      "id": "dataset"
    },
    "title": "Evidence on Additive and Advanced Manufacturing for Nexus Reports",
    "publication_date": "YYYY-MM-DD",
    "creators": [
      {
        "person_or_org": {
          "type": "personal",
          "family_name": "Your family name",
          "given_name": "Your given name",
          "identifiers": [
            {
              "scheme": "orcid",
              "identifier": "0000-0000-0000-0000"
            }
          ]
        },
        "affiliations": [
          {
            "id": "ROR identifier of your organisation"
          }
        ]
      }
    ],
    "description": "What it is, where its record is kept and how it bears on Exponential Technology Report 2026: Additive and Advanced Manufacturing.",
    "rights": [
      {
        "id": "cc-by-4.0"
      }
    ],
    "subjects": [
      {
        "subject": "Nexus Reports"
      },
      {
        "subject": "Additive and Advanced Manufacturing"
      },
      {
        "subject": "Exponential Technology Report · XT-13"
      }
    ],
    "related_identifiers": [
      {
        "identifier": "https://therisk.global/nexus-reports/editions/xt-13/",
        "scheme": "url",
        "relation_type": {
          "id": "issupplementto"
        },
        "resource_type": {
          "id": "publication-report"
        }
      }
    ],
    "version": "1.0.0"
  },
  "custom_fields": {},
  "access": {
    "record": "public",
    "files": "public"
  },
  "files": {
    "enabled": true
  },
  "parent": {
    "communities": {
      "default": "nexusreports"
    }
  }
}

C.5Where this edition sits among the six pillars

Foundry seals the evidence and Universe tests it; Reports publishes it; Standards takes its corrections and Academy teaches from it.

  1. F03 Sealed observations and indicator series Foundry Sealed observations and indicator series behind a profile (closeout).
  2. F04 After-action and scenario findings for Universe After-action and scenario findings for chapters 10 and 13 (after action review).
  3. F05 National Portfolio movement for chapter Foundry National Portfolio movement for chapter 11 (after action review).
  4. Applied in editions Standards Nexus Standards: applied in editions.
  5. XT-13 edition Reports Additive and Advanced Manufacturing 2026, published in every format with its sources, citation and corrections.
  6. F06 Method and correction findings as change Standards Method and correction findings as change proposals (correction).
  7. F12 Q4 synthesis informs the next-year Universe Q4 synthesis informs the next-year mandate (renewal).
  8. Taught in the open Academy Risk Academy: taught in the open.

What Foundry and Universe hand to this edition, and what it hands to Standards, Universe and Academy. From the programme spine; XT-13 is a drafted Baseline Edition, so these handoffs run from its first operational quarter.

引き継ぎBetweenWhat crosses, and when
F03Foundry to ReportsSealed observations and indicator series behind a profile (closeout).
F04Universe to ReportsAfter-action and scenario findings for chapters 10 and 13 (after action review).
F05Foundry to ReportsNational Portfolio movement for chapter 11 (after action review).
RingNexus Standards to ReportsNexus Standards: applied in editions.
F06Reports to Nexus StandardsMethod and correction findings as change proposals (correction).
F12Reports to UniverseQ4 synthesis informs the next-year mandate (renewal).
RingReports to Risk AcademyRisk Academy: taught in the open.
報告書貢献する

Send evidence or a correction on Additive and Advanced Manufacturing.

Reports is the Consortium’s quarterly publication, written by six desks. This page sits with the GCRI Systems Evidence desk. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work. Sent to the wrong desk, it is forwarded, not refused.

GCRI システム・エビデンスデスク指数関数的テクノロジー

CC BY 4.0 Free to read. Text and figures: CC BY 4.0. Data: CC0 1.0. Authors keep copyright. Published by GCRI Canada.