Skip to content

Draft, not yet released. In stewardship review. Not indexed until the first approved release.

Readings from the other desks

The additive manufacturing baseline is read through each steward’s lens, then once as a whole. Each lens is a projection of reviewed findings, not a separate argument. The other desks’ own editions of this subject are listed first, as cross-references, not copies.

16 min read0 figures8 tables32 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

अनुक्रमणिका
  1. ·Edition home
  2. ·Executive summary
  3. 1Additive manufacturing is production infrastructure that is still being qualified
  4. 2Key findings
  5. 3Systems and sectors at baseline
  6. 4Risks and capability
  7. 5Defence demand outruns part acceptance and supply
  8. 6Readings from the other desks
    1. 6.1 The other desks’ editions of this subject
    2. 6.2 Three lenses
    3. 6.3 Standards, Academy and steward contributions
    4. 6.4 GCRI reading: the model card
    5. 6.5 Global Risks Forum reading: editorial essays
    6. 6.6 Global Risks Alliance reading: 2027 additive manufacturing readiness pack
    7. 6.7 Nexus Standards reading: standards and regulatory watch
    8. 6.8 Risk Academy reading: literature and evidence review, science and assessments
  9. 7The 2027 agenda
  10. 8Systems in depth
  11. AMethodology
  12. BData appendix
  13. CReferences and record
  14. ·Complete edition, for print

6.1The other desks’ editions of this subject

Federation: each desk writes its own edition for the subjects in its remit. Until a desk releases, its edition shows its frame and the reading this edition printed for it.

Deskआवृत्तीस्थितीIdentifier
GCRI Systems EvidenceSystems Evidence: Additive and Advanced Manufacturing 2026Drafted, in stewardship reviewNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
GRF Public DeliberationOutside this desk’s remitNot in remit
GRA Capital ReadinessOutside this desk’s remitNot in remit
Standards ProgressStandards Progress: Additive and Advanced Manufacturing 2026In preparationNR-NXS-XT-13-2026-BASELINE (reserved)
Academy CapabilityCapability: Additive and Advanced Manufacturing 2026In preparationNR-RA-XT-13-2026-BASELINE (reserved)
Index MeasurementOutside this desk’s remitNot in remit

6.2Three lenses

One edition, read by each steward. The lens of this site comes first.

GCRI · KEY T

Technical Truth

The evidence supports reading additive manufacturing as production infrastructure with open part acceptance questions. Market growth is real but uneven, defence use is rising and the footprint is thinly measured. Evidence is strongest for company results and official counts, and weakest for energy, supply and workforce.

FIN-002 · GOV-007 · HLT-009 · SYS-012

GRF · KEY M

Public Meaning

For most people the story arrives as a headline about printed parts, a printed object or a controversy. The baseline asks that public debate separate market estimates, company claims and official counts, and keep worker safety in view.

FIN-002 · HLT-009

GRA · KEY F

Capital Meaning

Readiness implications only. Growth sits in services, machine makers report losses and one filed for Chapter 11345. These show where finance-readiness evidence will matter. Nothing here is advice, a rating or an approval.

FIN-003 · FIN-004

NEXUS

Synthesis

Additive manufacturing is well described by market totals and thinly measured as a system. The 2027 programme should bind part acceptance rates, publish a comparable energy footprint and test the defence demand pathway before orders outrun supply.

SYS-012 · M-01 · M-02

6.3Standards, Academy and steward contributions

How the Nexus Standards drafts, the Risk Academy and the three stewards feed each quarterly edition for additive manufacturing. The standards are a preparatory working draft (2026) and are cited as drafts, never as adopted standards.

Table 6.1The quarterly rhythm every edition follows
Quarterआवृत्तीप्रश्नBoundary
Q1State and AgendaWhat matters this year, and what is the starting position?observed baseline stays distinct from planned work
Q2Evidence and BuildWhat new evidence and capability exist?a configured capability is not a validated result
Q3Stress Test and ReadinessWhat do scenarios and tests show?simulated loss or performance is not observed impact
Q4Annual Synthesis and RenewalWhat changed in the year, and what renews?release follows review, not event publicity deadlines
Table 6.2Who contributes what each quarter
Steward or bodyभूमिकाContribution route
The Global Centre for Risk and Innovation (GCRI Canada)Lead Institution and Consortium Secretariat; publisher of record; technical truth (key T)science and practice communities · GCRI gateway
Global Risks Forum (GRF)leadership, dialogue and the Universe programme; public meaning (key M)policy, Universe and national adoption · GRF gateway
Global Risks Alliance (GRA)finance, insurance and development readiness; capital meaning (key F)finance and insurance · GRA gateway
Nexus Standardspreparatory drafts on vocabulary, hazards, indicators and methodsStandards site · working groups HAZ, IND, MTH, FIN, AI
Risk Academylearning pathways tied to the agenda questionsAcademy gateway · learning by review
Nexus Standards and Academytechnology chapter inputs: GCRI evidence, NXS standards, RA capabilitytechnology editorial board

Standards drafts used in this edition

  • Risk vocabulary NRS-C1 (424 terms) for terms in the glossary
  • Hazard atlas NHS-1 1.1.0 (905 hazards in 120 families) for risk objects
  • Seven risk classes: global, catastrophic, existential, emerging, planetary, exponential, frontier-tech

Standards calendar to watch

  • Founding calls from 20 October 2026; working groups meet from 5 November 2026
  • Inaugural Global Standards Council session, 12 January 2027
  • Quarterly reviews in March, June, September and December, aligned with each edition

6.4GCRI reading: the model card

GCRI’s reading of this edition is its model card: what the national model is, what it computes and where it stops. It is printed in full in Annex A, with the methods it belongs to. Annex A, methodology

6.5Global Risks Forum reading: editorial essays

Four signed essays by the Reports editorial team set out the positions this edition takes. They are interpretation, labelled as such; the evidence they draw on is in the findings register.

Additive manufacturing is now a production tool for some parts and a prototype tool for most. The first is slow and qualified; the second is fast and uncertain. Keeping them apart avoids both hype and dismissal.

EDITORIAL ESSAY · 01

Production, not novelty

A commercial survey summary, a company release and an official count carry different weight. This edition labels each, and asks for primary reports before market figures are relied on.

EDITORIAL ESSAY · 02

Separate market estimates, company claims and counts

Energy, inert gas, powder and worker exposure are rarely counted together. A published footprint would show whether growth is limited by physics, supply or skills.

EDITORIAL ESSAY · 03

The footprint is the blind spot

Machines exist. The work is qualifying processes, materials and operators across many sites, and the standards and benchmark programmes are still open.

EDITORIAL ESSAY · 04

Part acceptance is the near-term work

6.6Global Risks Alliance reading: 2027 additive manufacturing readiness pack

The registers that open the 2027 global cycle. At baseline each is initialised from this edition.

Table 6.32027 additive manufacturing readiness pack
Itemनोंदणी कराState at baselineFirst 2027 entry
E1Additive manufacturing risk state deltabaseline set by this editionchanges against the baseline
E2WEFH+B state deltafive global system readings setindicator updates and freshness
E3Agenda and Portfolio movementeight agenda items · 6 proposed objectsadmission decisions
E4Federation delivery registernational chapters in preparationnational chapters
E5Consortium capability registernational consortia formingfirst contributions
E6Leadership questions and challengesnone yetfirst challenge log
E7Foundry technical statenational environments preparedfirst federation cut
E8Publication candidatestwelve findings carried forwardPUBLISH · HOLD dispositions
E9Universe readinessone candidate missionadmission and role spine
E10Correction registernonefirst federation-wide cycle

Publication dispositions

  • प्रकाशित करा
  • Hold
  • Needs evidence
  • Restricted
  • Superseded

6.7Nexus Standards reading: standards and regulatory watch

Instruments and published guidance that shape the systems in this edition, by status on the retrieval date. The edition assesses no one’s compliance.

  • IN FORCE
  • PUBLISHED
  • DRAFT
  • PUBLISHED · VOLUNTARY
Table 6.4Standards and regulatory watch
साधनसंस्थाव्याप्तीस्थितीRelevance
ISO/ASTM 52900 terminology38ISO and ASTMglobalPUBLISHED · VOLUNTARYterms and definitions
ISO/ASTM 52911-1 and 52911-211ISO and ASTMglobalPUBLISHED · VOLUNTARYdesign for laser powder bed fusion
ISO/ASTM 5292211ISO and ASTMglobalPUBLISHED · VOLUNTARYdesign for directed energy deposition
Work item on feedstock re-use in metal powder bed fusion11ASTM F42globalDRAFTpowder re-use and sampling
ASTM F42 and ISO/TC 261 committees11ASTM and ISOglobalCOMMITTEE ACTIVEstandards programme
NIST AMS 100-60 reference model13NISTUSPUBLISHED 2024activity and data model
FDA technical considerations guidance27FDAUSPUBLISHED 2017medical devices
DoD Instruction 5000.9329DoDUS defenceIN FORCEadditive manufacturing policy
BIS interim final rule, ECCN 2B9102228BISUSIN FORCEexport control on metal machines
ISO/ASTM 5292039ISO and ASTMglobalPUBLISHED · VOLUNTARYpart acceptance of production sites

Changed since 2024

  • NIST updated its additive manufacturing standards page on 6 August 202611
  • A June 2026 feature reports Navy SUBSAFE qualification of printed parts under way at its Danville centre26
  • BIS published an interim final rule on metal machines in September 202422

To watch in 2027

  • Work items on feedstock re-use and design guides11
  • Navy part acceptance of materials and processes726
  • Amendments to the 2024 US export-control rule28

6.8Risk Academy reading: literature and evidence review, science and assessments

The review behind this edition covers additive manufacturing assessments, peer-reviewed science and the institutional reports that bind its findings. Systematic reviews for each agenda item begin in 2027.

Review protocol

प्रश्न
What does the published evidence establish about additive and advanced manufacturing as infrastructure and its couplings?
Sources searched
peer-reviewed journals and preprints; government bodies and standards committees; controls and strategies; market and supply analyses
Window
releases available at evidence close, 30 September 2026
Selection
sources that bind or contextualise a finding in this edition
Next step
systematic reviews for agenda items 01 to 05 in 2027
Table 6.5Peer-reviewed science and preprints
Referenceप्रकारवर्षभूमिकाUsed for
Baumers, Tuck and Hague14conference paper2015supportsprocess energy
Chen et al.15preprint2024supportsin-situ monitoring
Bhagat and Rudraraju16preprint2022contextmelt pool physics
Hong, Cho and Cho17preprint2026contextprocess control, simulation only
Baumers and Ozcan18preprint2016contextdigital manufacturing
DebRoy et al.41journal article2018frameworkmetal processes
Herzog et al.42journal article2016frameworkmetal microstructure
Gebler et al.40journal article2014contextsustainability
Table 6.6Institutional and defence sources
ReferenceIssuerवर्षभूमिकाUsed for
NIST AM-Bench12NIST2025supportsbenchmark data
NIST AMS 100-6013NIST2024supportsreference model
DoD strategy page10DoD2021supportsdirection
NAVSUP release7US Navy2026supportsparts counts
Maritime industrial base release8US Navy2025contextworkforce need
NIOSH page19NIOSH2026supportshazards
SIPRI paper21SIPRI2017contextcontrols
Table 6.7Standards, policy and controls
ReferenceIssuerवर्षभूमिकाUsed for
NIST standards page11NIST2026supportscommittees and work items
ISO/ASTM 5290038ISO and ASTM2021frameworkterminology
ISO/ASTM 5292039ISO and ASTM2023contextpart acceptance of sites
FDA guidance27FDA2017contextmedical devices
BIS interim final rule28BIS2024contextmetal machine controls
Table 6.8Market, supply and workforce overviews
ReferenceIssuerवर्षभूमिकाUsed for
Wohlers Report trade summaries12trade press2025 to 2026supportsmarket size
Stratasys release3company2026supportsmachine-maker results
3D Systems release4company2026supportsmachine-maker results
Nano Dimension filing5company2026supportsconsolidation
AML3D announcement9company2026contextvendor claim
Powder supply commentary33supplier blog2025contextpowder
Salary survey34recruiter2026contextworkforce

Where the evidence agrees

  • Part acceptance is the main barrier to production use715
  • Metal powders are a worker hazard that needs controls1920
  • Machine sales are weak while services and materials grow234

Where it is unsettled

  • How large the market really is, since figures come from one commercial survey12
  • How much energy and gas metal machines use per kilogram of part14
  • How fast part acceptance can scale in defence and aerospace710

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  2. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  3. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  4. 38ISO and ASTM International (eds.), ISO/ASTM 52900:2021, Additive manufacturing, general principles, fundamentals and vocabulary, published 16 November 2021 by ISO/TC 261 (ISO open data deliverables record read; replaces the 2015 edition; confirmed at systematic review). ISO, Geneva. Observation year 2021. Accessed 2026-11-05.back
  5. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03.back
  6. 13Gibbons, D.W. and Witherell, P.W., A reference activity model for additive manufacturing: powder bed fusion, NIST AMS 100-60, July 2024 (front matter and abstract read). National Institute of Standards and Technology, Gaithersburg. Observation year 2024. Accessed 2026-11-03.back
  7. 27Food and Drug Administration (ed.), Technical considerations for additive manufactured medical devices: guidance for industry and Food and Drug Administration staff, issued 5 December 2017 (guidance document opened; draft issued 10 May 2016; notice of availability 82 FR 57462). FDA, Silver Spring. Observation year 2017. Accessed 2026-11-05.back
  8. 29Department of Defense (ed.), DoD Instruction 5000.93, Use of additive manufacturing in the DoD, June 2021 (announcement of the Office of the Under Secretary of Defense for Research and Engineering, 25 June 2021, read: establishes policy, assigns responsibilities and gives guidance on acquisition, part acceptance, data, security, standards and training; the instruction text host refused automated access). DoD, Washington. Observation year 2021. Accessed 2026-11-05.back
  9. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  10. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05.back
  11. 39ISO and ASTM International (eds.), ISO/ASTM 52920:2023, Additive manufacturing, qualification principles, requirements for industrial additive manufacturing processes and production sites, published 29 June 2023 by ISO/TC 261 (ISO open data deliverables record read). ISO, Geneva. Observation year 2023. Accessed 2026-11-05.back
  12. 26LaGrone, S., The Navy’s big 3-D printing bet (feature, USNI News, 23 June 2026; full text read through the publisher’s public feed: the Additive Manufacturing Center of Excellence in Danville, Virginia, opened in 2023 with USD 35 million from Virginia; wider use of printed parts is limited by Navy part acceptance rules, contract language and design rights; SUBSAFE qualification under way). US Naval Institute, Annapolis. Observation year 2026. Accessed 2026-11-05.back
  13. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  14. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  15. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03.back
  16. 16Bhagat, K. and Rudraraju, S., A numerical investigation of dimensionless numbers characterising meltpool morphology of the laser powder bed fusion process, arXiv:2211.06312, submitted 11 November 2022 (abstract page read; simulation study). arXiv, Ithaca. Observation year 2022. Accessed 2026-11-03.back
  17. 17Hong, G., Cho, J. and Cho, H., Neuro-symbolic closed-loop control of laser powder bed fusion with an in-loop ontology, arXiv:2608.05773, submitted 6 August 2026 (abstract page read; preprint, simulation only, not peer reviewed). arXiv, Ithaca. Observation year 2026. Accessed 2026-11-03.back
  18. 18Baumers, M. and Ozcan, E., Scope for machine learning in digital manufacturing, arXiv:1609.05835, submitted 19 September 2016 (abstract page read; position paper with no figures). arXiv, Ithaca. Observation year 2016. Accessed 2026-11-03.back
  19. 41DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T. et al., Additive manufacturing of metallic components: process, structure and properties, Progress in Materials Science 92, 112 to 224, March 2018 (Crossref record read; doi 10.1016/j.pmatsci.2017.10.001). Elsevier, Amsterdam. Observation year 2018. Accessed 2026-11-05. doi:10.1016/j.pmatsci.2017.10.001back
  20. 42Herzog, D., Seyda, V., Wycisk, E. and Emmelmann, C., Additive manufacturing of metals, Acta Materialia 117, 371 to 392, September 2016 (Crossref record read; doi 10.1016/j.actamat.2016.07.019). Elsevier, Amsterdam. Observation year 2016. Accessed 2026-11-05. doi:10.1016/j.actamat.2016.07.019back
  21. 40Gebler, M., Schoot Uiterkamp, A.J.M. and Visser, C., A global sustainability perspective on 3D printing technologies, Energy Policy 74, 158 to 167, November 2014 (Crossref record read; doi 10.1016/j.enpol.2014.08.033). Elsevier, Amsterdam. Observation year 2014. Accessed 2026-11-05. doi:10.1016/j.enpol.2014.08.033back
  22. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  23. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03.back
  24. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  25. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03.back
  26. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  27. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  28. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  29. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03.back
  30. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back
  31. 34Alexander Daniels Global (ed.), The 2026 additive manufacturing salary survey signals a shift toward operational maturity (article on 3DPrint.com, 13 January 2026, read: 10th edition of the survey; production the most in-demand discipline, with 75% of AM companies planning to hire in it; the survey report itself was not opened; recruiter survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.back
  32. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back

Downloads

Draft, not yet releasedReview copies of a draft in stewardship review. The released edition carries its DOI and replaces them.

  • Print

    • PDF, A4

      The designed print edition, A4: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF113 pages1.0 MBTagged, with bookmarks

      SHA-256 9f9c0bdd112c9edd155a42b7deb0eb16a83972daf6aec20f918c9a6922d6a487

    • PDF, US Letter

      The designed print edition, US Letter: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF118 pages1.1 MBTagged, with bookmarks

      SHA-256 c5ba6a27b592bc5d4e5fc9678986c1ea05dc4babaca6d264fe12924a87a0f417

  • Web edition

  • Data bundle

    • Indicators, CSV

      16 indicators with unit, year, status and source

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.csv1 KB

      SHA-256 ec47045da100257a326321c531b49ec523a5f9c59161000e0c8d1978ca168b69

    • Indicators, JSON

      The same indicators with the edition’s identity and licence

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.json2 KB

      SHA-256 e578505481cdacf1ca29fcbcad3010be8d9b2541e4721bc2eb8304d90412c885

    • Findings, CSV

      12 findings with status, evidence-quality level and references

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-findings.csv3 KB

      SHA-256 ac3ad24fc5cc470e585bd6806a983db4c2224f62f35c653e1c9852511e02a925

  • Citation files

    • Citation, BibTeX

      For LaTeX and reference managers

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.bib1 KB

      SHA-256 af46b873e727338fcfbee92dfb1a02521c9d3ab443debfe0dd537fcdb45b0df1

    • Citation, RIS

      For Zotero, EndNote and Mendeley

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.ris1 KB

      SHA-256 8de9cef71c5448dc0b204326d1399f299e681eec8cb4b05fadb79cb6cd0fb600

    • Citation, CITATION.cff

      Citation File Format 1.2.0, for GitHub, Zenodo and software catalogues

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.cff1 KB

      SHA-256 13283b08157f9aa4185284587c66dec81aece9e75d2ca6a40564a630aeba9282

Check a file with its SHA-256: shasum -a 256 <file> (macOS, Linux) or Get-FileHash <file> (Windows). Text, tables and figures by Nexus: CC BY 4.0; each source keeps its own licence.

Cite this chapter

Valadbaygi, S. (Ed.). (2026). Chapter 6: Readings from the other desks. In Exponential Technology Report 2026: Additive and Advanced Manufacturing (Baseline Edition 2026, Report No. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE) [Draft under review]. The Global Centre for Risk and Innovation (GCRI).

Every citation form of the whole report, BibTeX and RIS included, is on the edition home. Cite this report

अहवालयोगदान द्या

Send evidence or a correction on Additive and Advanced Manufacturing.

Reports is the Consortium’s quarterly publication, written by six desks. This page sits with the GCRI Systems Evidence desk. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work. Sent to the wrong desk, it is forwarded, not refused.

GCRI Systems Evidence deskExponential Technology
Contribution form · reports.contribution.gcri

वैयक्तिक डेटा, संवेदनशील पायाभूत सुविधांचा तपशील किंवा सामायिक करण्याचा तुम्हाला अधिकार नसलेले काहीही कधीही पाठवू नका. योगदानाचे वापरापूर्वी पुनरावलोकन केले जाते; ते पाठवल्याने कोणतेही लेखकत्व किंवा संपादकीय अधिकार मिळत नाहीत, आणि प्रायोजकत्वाने कधीही निष्कर्ष विकत घेता येत नाही.

CC BY 4.0 Free to read. Text and figures: CC BY 4.0. Data: CC0 1.0. Authors keep copyright. Published by GCRI Canada.

Your role here

What you can do from this page.

  • ReaderFound an error? Every correction is public.Corrections log
  • ContributorSend evidence, data or a correction to this desk.Contribute
  • ReviewerReview for this desk; verified reviews are credited.Become a reviewer
  • Editor, steward or boardQueues, decisions and production are in the workspace.My workspace