Knowledge base
प्रश्न और उत्तर
36 questions from 6 articles.
Climate Risk: Physical and Transition Risk, Scenarios and Disclosure
What is the difference between physical and transition climate risk?
Physical risk comes from the climate itself: acute events such as floods, storms and heatwaves, and chronic shifts such as rising temperatures and sea levels. Transition risk comes from the move to a low-carbon economy: new policies and laws, technology change, shifting markets and reputational pressure. The two are linked, since a slower transition raises physical risk and a disorderly one raises transition risk.
How is climate risk defined by the IPCC?
The IPCC defines risk as the potential for adverse consequences for human or ecological systems. In the context of climate impacts, risk results from dynamic interactions between climate-related hazards and the exposure and vulnerability of the affected system. The IPCC also counts risks from responses to climate change, such as policies that fail or have negative side effects.
What are the NGFS scenarios?
The NGFS scenarios are a set of climate and macro-financial pathways published by the Network for Greening the Financial System for central banks and supervisors. Phase V, released in November 2024, includes pathways such as Net Zero 2050, Delayed Transition and Current Policies. After a key damage-function paper was retracted in December 2025, the NGFS told users to take this into account and planned updated methodology for its next scenarios.
Is TCFD still in use?
The TCFD disbanded in October 2023 after publishing its final status report, and the FSB asked the IFRS Foundation to take over monitoring of climate disclosure. Its framework lives on in IFRS S2, which integrates and builds on the TCFD's recommendations, including the split between physical and transition risk.
How do companies assess climate risk?
Companies map where their assets, suppliers and markets are exposed to climate hazards, assess vulnerability and transition exposure, run scenario analysis across several pathways, estimate financial effects, and integrate results into strategy and risk management. Disclosure under IFRS S2 then explains these risks, their effects and how they are managed.
How much warming has already occurred?
The IPCC found that global surface temperature reached 1.1°C above 1850-1900 in 2011-2020. The WMO reports that 2025 was the second or third hottest year on record, at about 1.43°C above the 1850-1900 average, and that 2015 to 2025 were the 11 hottest years on record.
Read the article: Climate Risk: Physical and Transition Risk, Scenarios and Disclosure
Disaster Risk Reduction and the Sendai Framework 2015-2030
What is disaster risk reduction in simple words?
Disaster risk reduction means acting before disasters happen so that hazards such as floods, earthquakes or heatwaves cause less harm. It covers avoiding new risk (for example by not building in floodplains), reducing existing risk (for example by retrofitting schools and installing early warning systems) and managing what remains through preparedness, insurance and recovery planning.
What are the 7 targets of the Sendai Framework?
The seven targets are to reduce (A) disaster mortality, (B) the number of affected people, (C) direct economic loss relative to GDP, and (D) damage to critical infrastructure and disruption of basic services; and to increase (E) the number of countries with national and local DRR strategies, (F) international cooperation with developing countries, and (G) access to multi-hazard early warning systems and risk information.
What are the 4 priorities of the Sendai Framework?
Priority 1 is understanding disaster risk. Priority 2 is strengthening disaster risk governance to manage disaster risk. Priority 3 is investing in disaster risk reduction for resilience. Priority 4 is enhancing disaster preparedness for effective response and to Build Back Better in recovery, rehabilitation and reconstruction.
What did the Sendai Framework midterm review find?
The midterm review concluded in May 2023 with a political declaration adopted by the UN General Assembly. Governments stated that implementation was delivering results but that its pace was not sufficient nor equal, that economic losses were rising, and that disaster risk is increasingly complex and systemic, so conventional disaster management is no longer adequate.
What is the difference between DRR and disaster management?
Disaster management organises preparedness, response and recovery when a disaster strikes. Disaster risk reduction is broader and earlier: it aims to prevent new risk and reduce existing risk through land use, building codes, infrastructure, ecosystems, finance and governance, and it includes preparedness as one component. The Sendai Framework marked a shift from managing disasters to managing risk.
What is the formula for disaster risk?
Disaster risk is commonly expressed as a function of hazard, exposure and vulnerability, reduced by capacity. UNDRR defines disaster risk as potential losses determined probabilistically as a function of hazard, exposure, vulnerability and capacity. It is a conceptual relationship, not a literal multiplication of scores.
Read the article: Disaster Risk Reduction and the Sendai Framework 2015-2030
Integrated Risk Management: Definition, Frameworks and Implementation
What is the difference between IRM and ERM?
ERM is a management framework for the risks that affect an organisation's strategy and performance; IRM is the practice of running that framework, together with compliance, security, resilience and operational risk, on one shared taxonomy, data set and decision process. In practice IRM is ERM done without silos. The term IRM was popularised by Gartner as a technology and process category, while ERM is anchored in the COSO 2017 framework and ISO 31000.
Is ISO 31000 a certifiable standard?
No. ISO 31000:2018 gives guidelines, not requirements, so organisations cannot be certified against it. It provides principles, a framework and a process that can be tailored to any organisation. A revision, ISO/CD 31000, is under development at ISO/TC 262, and the 2018 edition remains current until it is replaced.
What are the components of an integrated risk management framework?
Most frameworks share five elements: governance and culture (who owns risk and how decisions are taken), strategy and appetite (how much risk is acceptable), a common process for identifying, analysing, evaluating and treating risk, information and reporting on one data set, and review and improvement. COSO ERM 2017 organises these into five components and 20 principles; ISO 31000 into eight principles, a framework and a process.
How is IRM different from GRC?
GRC (governance, risk and compliance) focuses on governance and meeting obligations and is often organised around compliance and audit functions. IRM puts decision-making under uncertainty at the centre and treats compliance as one input among strategic, operational, financial and external risks. Mature organisations use GRC capabilities as part of an IRM approach rather than as a separate programme.
How long does it take to implement integrated risk management?
There is no standard duration, because integration depends on the organisation's size, existing frameworks and data. A practical sequence is to agree a taxonomy and appetite first, connect the highest-impact risk processes to one register and reporting cycle, and then extend integration to other functions. ISO 31000 treats integration as a dynamic and iterative process rather than a one-off project.
Does integrated risk management apply to public institutions and cities?
Yes. ISO 31000 is written for any organisation, and public bodies use integrated approaches to manage risks that cross agencies, such as floods that disrupt power, water and health services at once. For risks that cross whole systems, the IRGC's 2018 Guidelines for the Governance of Systemic Risks extend integrated risk management to shared, society-wide risks.
Read the article: Integrated Risk Management: Definition, Frameworks and Implementation
Risk Assessment: ISO 31000 Process, Techniques and Risk Matrix Limits
What are the steps of a risk assessment?
ISO 31000 defines risk assessment as three steps: risk identification, risk analysis and risk evaluation. They sit inside a wider process that starts with scope, context and criteria and continues with risk treatment, monitoring and review, and recording and reporting, with communication and consultation throughout.
What is the difference between qualitative and quantitative risk assessment?
Qualitative assessment uses descriptive categories such as low, moderate and high, which are quick and easy to communicate but hard to compare. Quantitative assessment uses numbers whose meaning holds outside the assessment, such as probabilities and monetary losses, which support cost-benefit analysis but need data and explanation. Semi-quantitative methods use scores or bins in between.
Who should carry out a risk assessment?
A risk assessment should be led by people who understand the objectives at stake and carried out with those who hold relevant knowledge: operators, specialists, affected stakeholders and, for complex risks, independent reviewers. ISO 31000 treats communication and consultation as part of the process, and IEC 31010 includes techniques for eliciting expert and stakeholder views. Accountability for accepting the result stays with the decision-maker.
What is IEC 31010?
IEC 31010:2019, Risk management — Risk assessment techniques, is the companion standard to ISO 31000 that explains how to plan an assessment and choose techniques. Its second edition describes 42 techniques in ten groups, from brainstorming and the Delphi technique to bow tie analysis, Monte Carlo simulation, value at risk and the consequence/likelihood matrix.
Why are risk matrices criticised?
Risk matrices compress continuous likelihoods and consequences into a few ordinal boxes, so risks with very different expected losses can land in the same cell and some risks can be ranked in the wrong order. Cox showed in 2008 that matrices can assign higher ratings to quantitatively smaller risks. They remain useful for communication if their scales are defined and their limits stated.
What is a disaster risk assessment?
A disaster risk assessment determines the nature and extent of disaster risk by analysing hazards and evaluating exposure and vulnerability, as UNDRR defines it. It typically covers hazard location, intensity, frequency and probability, the people and assets exposed, their vulnerability, and the capacity to cope under likely scenarios.
Read the article: Risk Assessment: ISO 31000 Process, Techniques and Risk Matrix Limits
Systemic Risk: Definition, Cascading Risks and the Polycrisis
What is systemic risk in simple terms?
Systemic risk is the chance that a problem in one part of a connected system spreads and damages the whole system. In finance it means a failure that disrupts financial services and harms the real economy. In disaster and climate science it means hazards and failures that cascade across sectors such as power, water, food and health.
What is an example of systemic risk?
The 2008 global financial crisis is the classic financial example: distress at a few large, interconnected institutions spread through funding markets to the real economy. The COVID-19 pandemic is a cross-sector example, spreading from public health to supply chains, finance and education. A regional flood that cuts power, which stops water treatment and closes hospitals, is a local example.
What is the difference between systemic risk and systematic risk?
Systematic risk is market-wide risk that cannot be diversified away, such as interest-rate or recession risk affecting all assets. Systemic risk is the risk that the system itself breaks down because failures propagate through its connections. A systematic shock can trigger systemic risk, but the two concepts answer different questions.
What is the difference between cascading and compound risk?
Compound risk concerns several drivers or hazards occurring together or in sequence, such as heat and drought, that jointly cause more harm than each alone. Cascading risk concerns an impact that propagates through dependencies, such as a power failure that stops water treatment. Real disasters often involve both.
What is the polycrisis?
Polycrisis describes several crises in different global systems that are causally entangled, so that each worsens the others. Lawrence and colleagues defined it in 2024 as the causal entanglement of crises in multiple global systems in ways that significantly degrade humanity's prospects. The World Economic Forum's Global Risks Report used the term in its 2023 edition.
How is systemic risk measured?
In finance, supervisors assess systemic importance with indicators built on criteria such as size, interconnectedness and substitutability, alongside network models and stress tests. Outside finance, analysts use dependency mapping, network models, cascade simulations and scenario analysis. No single number captures systemic risk, so assessments combine models with stated uncertainty.
Read the article: Systemic Risk: Definition, Cascading Risks and the Polycrisis
The Water-Energy-Food Nexus: Origins, Frameworks and Risks
What is the water-energy-food nexus in simple terms?
It is the recognition that water, energy and food are tied together: farms need water and energy, power plants need water, and pumping and treating water needs energy. Managing one in isolation can harm the others, so the nexus approach plans them together to find trade-offs and shared benefits.
Where did the WEF nexus concept come from?
The concept was brought into international policy by the Bonn2011 Conference on the Water, Energy and Food Security Nexus, held in Bonn, Germany, from 16 to 18 November 2011. Its background paper, Understanding the Nexus by Holger Hoff of the Stockholm Environment Institute, set out the evidence for an integrated approach.
What is an example of the water-energy-food nexus?
During a drought, lower river flows cut hydropower and the cooling water that thermal power plants need, while farmers pump more groundwater for irrigation, using more electricity. Power shortages then reduce pumping and cold storage, and food prices rise. Each sector's problem worsens the others.
What is the FAO approach to the nexus?
FAO's 2014 framework works in three areas: evidence on the state of resources and interlinkages, scenario development to explore future pressures and policies, and response options assessed with stakeholders. It frames nexus interactions as interdependencies, constraints and synergies, set within drivers such as population, urbanisation, trade, diets and climate change.
How does climate change affect the WEF nexus?
Climate change alters rainfall, river flows, crop yields and energy demand at the same time, so it stresses all three sectors together. The IPCC reports that weather and climate extremes have already exposed millions of people to acute food insecurity and reduced water security, and that compound and cascading risks will become more complex to manage.
Why add biodiversity and health to the nexus?
Water, energy and food all depend on ecosystems, and their failures show up in human health. The IPBES nexus assessment of 2024 therefore analysed biodiversity, water, food, health and climate change together and assessed more than 70 response options for their co-benefits across all of them.
Read the article: The Water-Energy-Food Nexus: Origins, Frameworks and Risks