Skip to content

Draft, not yet released. In stewardship review. Not indexed until the first approved release.

References and record

Every source the edition rests on, the publication record, the corrections log and the open record.

16 min read0 figures1 table0 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

ناوەڕۆک
  1. ·Edition home
  2. ·Executive summary
  3. 1Additive manufacturing is production infrastructure that is still being qualified
  4. 2Key findings
  5. 3Systems and sectors at baseline
  6. 4Risks and capability
  7. 5Defence demand outruns part acceptance and supply
  8. 6Readings from the other desks
  9. 7The 2027 agenda
  10. 8Systems in depth
  11. Aمیتۆدۆلۆژی
  12. BData appendix
  13. CReferences and record
    1. C.1 42 sources
    2. C.2 Publication record
    3. C.3 Corrections log
    4. C.4 Open record
    5. C.5 Where this edition sits among the six pillars
  14. ·Complete edition, for print

C.142 sources

NR-CIT-1, editor first. A DOI is linked where the source has one; Nexus records carry a UNI once the catalogue allocates it (NS-1).

  1. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03. Cited in chapter 1, chapter 2, chapter 6
  2. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 7, chapter 8
  3. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  4. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  5. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 4, chapter 5, chapter 6, chapter 7, chapter 8
  6. 6GE Aerospace (ed.), Manufacturing milestone: 30,000 additive fuel nozzles (company article, 4 October 2018; Auburn, Alabama; one piece replacing about 20; about 25% lighter; more than 40 printers; vendor announcement, weak evidence). GE Aerospace, Evendale. Observation year 2018. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 8
  7. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 7, chapter 8
  8. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 2, chapter 4, chapter 6, chapter 8
  9. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03. Cited in chapter 6, chapter 8
  10. 10OSD ManTech Program Office (ed.), DoD additive manufacturing strategy (article page of the Defense Systems Information Analysis Center dated 1 March 2021; strategy released January 2021 by the Office of the Under Secretary of Defense for Research and Engineering; the page lists no figures; the strategy document itself was not opened). Defense Systems Information Analysis Center, Belcamp. Observation year 2021. Accessed 2026-11-03. Cited in chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  11. 11NIST (ed.), Additive manufacturing standards (program page, updated 6 August 2026; ASTM F42, ISO/TC 261; ISO/ASTM 52911-1 and 52911-2 of 2019; ISO/ASTM 52922; work items WK72938, WK75184, WK78224, WK83109 in development). National Institute of Standards and Technology, Gaithersburg. Observation year 2026. Accessed 2026-11-03. Cited in chapter 1, chapter 4, chapter 6, chapter 8
  12. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  13. 13Gibbons, D.W. and Witherell, P.W., A reference activity model for additive manufacturing: powder bed fusion, NIST AMS 100-60, July 2024 (front matter and abstract read). National Institute of Standards and Technology, Gaithersburg. Observation year 2024. Accessed 2026-11-03. Cited in chapter 3, chapter 4, chapter 6
  14. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 6, chapter 8
  15. 15Chen, L. et al., In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review, arXiv:2404.13673, submitted 21 April 2024 (abstract page read; accepted to the Journal of Manufacturing Systems). arXiv, Ithaca. Observation year 2024. Accessed 2026-11-03. Cited in chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  16. 16Bhagat, K. and Rudraraju, S., A numerical investigation of dimensionless numbers characterising meltpool morphology of the laser powder bed fusion process, arXiv:2211.06312, submitted 11 November 2022 (abstract page read; simulation study). arXiv, Ithaca. Observation year 2022. Accessed 2026-11-03. Cited in chapter 4, chapter 6, chapter 8
  17. 17Hong, G., Cho, J. and Cho, H., Neuro-symbolic closed-loop control of laser powder bed fusion with an in-loop ontology, arXiv:2608.05773, submitted 6 August 2026 (abstract page read; preprint, simulation only, not peer reviewed). arXiv, Ithaca. Observation year 2026. Accessed 2026-11-03. Cited in chapter 6, chapter 8
  18. 18Baumers, M. and Ozcan, E., Scope for machine learning in digital manufacturing, arXiv:1609.05835, submitted 19 September 2016 (abstract page read; position paper with no figures). arXiv, Ithaca. Observation year 2016. Accessed 2026-11-03. Cited in chapter 6
  19. 19NIOSH (ed.), Additive manufacturing (manufacturing sector page, dated 16 July 2026; hazards named: inhalation of powders, skin contact, fire and explosion, mechanical and ergonomic injury). National Institute for Occupational Safety and Health, Washington. Observation year 2026. Accessed 2026-11-03. Cited in chapter 2, chapter 4, chapter 6, chapter 8
  20. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  21. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03. Cited in chapter 2, chapter 3, chapter 4, chapter 6, chapter 8
  22. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03. Cited in the summary, chapter 1, chapter 2, chapter 3, chapter 4, chapter 5, chapter 6, chapter 8
  23. 23Wohlers Associates, powered by ASTM International (ed.), 3D printing and AM market grows 9.1% according to Wohlers Report 2025 (press release, Washington, 29 April 2025, distributed by PR Newswire and read in full on a republishing page; the report has been published for 30 consecutive years; global AM industry grew 9.1% to USD 21.9 billion; growth mostly in Asia and China; system makers declined while services, software and materials grew; the report itself was not opened). Wohlers Associates, Washington. Observation year 2024. Accessed 2026-11-05. Cited in chapter 2
  24. 24Wohlers Associates (ed.), Wohlers Report 2026 (report overview page on the Wohlers platform read: released 17 February 2026; the page gives no figures and the report itself, a subscription product, was not opened; the figures used come from the trade summary [2]). Wohlers Associates, Washington. Observation year 2025. Accessed 2026-11-05.
  25. 25International Energy Agency (ed.), Global Critical Minerals Outlook 2026, revised version, July 2026 (full report opened; export controls announced, proposed or updated in 2025 and 2026 on tungsten, rare earths and other minerals; tungsten prices rose sixfold; aerospace and defence depend on cobalt, titanium, tungsten and yttrium; no figure used in copy). IEA, Paris. Observation year 2025. Accessed 2026-11-05. Cited in chapter 1, chapter 4, chapter 8
  26. 26LaGrone, S., The Navy’s big 3-D printing bet (feature, USNI News, 23 June 2026; full text read through the publisher’s public feed: the Additive Manufacturing Center of Excellence in Danville, Virginia, opened in 2023 with USD 35 million from Virginia; wider use of printed parts is limited by Navy part acceptance rules, contract language and design rights; SUBSAFE qualification under way). US Naval Institute, Annapolis. Observation year 2026. Accessed 2026-11-05. Cited in chapter 6
  27. 27Food and Drug Administration (ed.), Technical considerations for additive manufactured medical devices: guidance for industry and Food and Drug Administration staff, issued 5 December 2017 (guidance document opened; draft issued 10 May 2016; notice of availability 82 FR 57462). FDA, Silver Spring. Observation year 2017. Accessed 2026-11-05. Cited in chapter 6
  28. 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05. Cited in the summary, chapter 2, chapter 6
  29. 29Department of Defense (ed.), DoD Instruction 5000.93, Use of additive manufacturing in the DoD, June 2021 (announcement of the Office of the Under Secretary of Defense for Research and Engineering, 25 June 2021, read: establishes policy, assigns responsibilities and gives guidance on acquisition, part acceptance, data, security, standards and training; the instruction text host refused automated access). DoD, Washington. Observation year 2021. Accessed 2026-11-05. Cited in chapter 6
  30. 30GE Aerospace (ed.), GE Aerospace announces third quarter 2024 results (company release, 22 October 2024, read: interim impairment test at the Colibrium Additive reporting unit, given declines in the additive manufacturing industry due to slower adoption of the technology, gave a non-cash goodwill loss of USD 251 million). GE Aerospace, Evendale. Observation year 2024. Accessed 2026-11-05.
  31. 31Kota, A., Nallagundla, V.R., Assuad, C.S.A., Martinsen, K. and Simhambhatla, S., Parametric investigation, formulation, and benchmarking of energy consumption for the powder bed fusion process, Cleaner and Responsible Consumption 14, 100205, September 2024 (Crossref record and abstract read: total energy per part falls by up to 32.68% with higher capacity use and by 50% with a changed part orientation; doi 10.1016/j.clrc.2024.100205). Elsevier, Amsterdam. Observation year 2024. Accessed 2026-11-05. doi:10.1016/j.clrc.2024.100205
  32. 32Gee, K. and Hart, A.J., Parametric analysis of relationships among part geometry, build time, and energy consumption for laser powder bed fusion, ASME 2024 International Design Engineering Technical Conferences, 29th Design for Manufacturing and the Life Cycle Conference, V005T05A004, August 2024 (Crossref record and abstract read: specific energy consumption of 20.3 to 30.5 MJ/kg for fifteen 100 g AlSi10Mg parts on a simulated machine; doi 10.1115/DETC2024-142824). American Society of Mechanical Engineers, New York. Observation year 2024. Accessed 2026-11-05. doi:10.1115/DETC2024-142824
  33. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05. Cited in chapter 4, chapter 6, chapter 8
  34. 34Alexander Daniels Global (ed.), The 2026 additive manufacturing salary survey signals a shift toward operational maturity (article on 3DPrint.com, 13 January 2026, read: 10th edition of the survey; production the most in-demand discipline, with 75% of AM companies planning to hire in it; the survey report itself was not opened; recruiter survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05. Cited in chapter 6
  35. 35VonBank, D., What the 2026 post-processing survey reveals about the future of AM (article on 3DPrint.com, 24 March 2026, read: fifth edition of the PostProcess Technologies survey; time and labour to finish parts named as a main constraint on scaling; the survey report itself was not opened; vendor survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.
  36. 36Kirchain, R., Moore, E. and Field, F., Preparing the advanced manufacturing workforce: a study of occupation and skills demand in the 3D/additive manufacturing industry, Workforce Roadmap series, June 2022 (repository record read; interviews on middle-skilled technical occupations). Massachusetts Institute of Technology, Cambridge. Observation year 2022. Accessed 2026-11-05.
  37. 37National Bureau of Statistics of China (ed.), National economy pushed forward with innovation-led and high-quality development and expected targets achieved successfully in 2025 (press release, 19 January 2026, read: production of 3D printing devices grew 52.5% in 2025; no unit or value total given). NBS, Beijing. Observation year 2025. Accessed 2026-11-05.
  38. 38ISO and ASTM International (eds.), ISO/ASTM 52900:2021, Additive manufacturing, general principles, fundamentals and vocabulary, published 16 November 2021 by ISO/TC 261 (ISO open data deliverables record read; replaces the 2015 edition; confirmed at systematic review). ISO, Geneva. Observation year 2021. Accessed 2026-11-05. Cited in chapter 6
  39. 39ISO and ASTM International (eds.), ISO/ASTM 52920:2023, Additive manufacturing, qualification principles, requirements for industrial additive manufacturing processes and production sites, published 29 June 2023 by ISO/TC 261 (ISO open data deliverables record read). ISO, Geneva. Observation year 2023. Accessed 2026-11-05. Cited in chapter 6
  40. 40Gebler, M., Schoot Uiterkamp, A.J.M. and Visser, C., A global sustainability perspective on 3D printing technologies, Energy Policy 74, 158 to 167, November 2014 (Crossref record read; doi 10.1016/j.enpol.2014.08.033). Elsevier, Amsterdam. Observation year 2014. Accessed 2026-11-05. doi:10.1016/j.enpol.2014.08.033 Cited in chapter 6
  41. 41DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T. et al., Additive manufacturing of metallic components: process, structure and properties, Progress in Materials Science 92, 112 to 224, March 2018 (Crossref record read; doi 10.1016/j.pmatsci.2017.10.001). Elsevier, Amsterdam. Observation year 2018. Accessed 2026-11-05. doi:10.1016/j.pmatsci.2017.10.001 Cited in chapter 6
  42. 42Herzog, D., Seyda, V., Wycisk, E. and Emmelmann, C., Additive manufacturing of metals, Acta Materialia 117, 371 to 392, September 2016 (Crossref record read; doi 10.1016/j.actamat.2016.07.019). Elsevier, Amsterdam. Observation year 2016. Accessed 2026-11-05. doi:10.1016/j.actamat.2016.07.019 Cited in chapter 6

C.2Publication record

بڵاوکراوە

Title
Exponential Technology Report 2026: Additive and Advanced Manufacturing, Baseline Edition
زنجیرە
Reports · Exponential Technology Series XT-13
وەشان
Baseline Edition 2026 · inaugural annual
وەشان
v1.0.0 · draft for stewardship review
Publication ID
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Evidence close
30 September 2026
Publication date
October 2026
DOI
concept and version DOI at deposit

بڵاوکەرەوە

Publisher of record
The Global Centre for Risk and Innovation (GCRI), for the Nexus Consortium
شوێن
Toronto
Editor
Saeed Valadbaygi, Chief Steward and Managing Editor
پارێزەران
GCRI · technical truth · the Global Risks Forum (GRF) · public meaning · the Global Risks Alliance (GRA) · capital meaning
مۆڵەت
text CC BY 4.0; data on the terms of each source
Copyright
© 2026 GCRI · Nexus Consortium
زمان
English (en-GB) source edition
Correspondence
Registry correction pathway · editorial office

Colophon

فۆرمات
A4 portrait · screen, print and archival PDF
Typefaces
Space Grotesk (display) · Geist (text) · IBM Plex Sans Italic (standfirsts) · IBM Plex Mono (data)
Design standard
Reports Foundational Edition, Volume I, Part VII
دەستگەیشتن
tagged PDF and HTML targets; text alternatives for every figure
Production
Reports editorial team, GCRI

Release path for this version

Table C.1Release path for this version
هەنگاوWhat happensWhen
پێشنووسeditorial self-check complete at evidence closeOctober 2026
Steward reviewfive passes on the exact draft (keys T · M · F · N)Q4 2026
Approvalpublication authority approves the exact digestbefore release
Depositconcept and version DOI minted; registry pointer setat release
جێگرتنەوەthe 2027 additive manufacturing edition reports changes against this baseline2027
Current version
v1.0.0 draft, stewardship review
Previous edition
none, first edition of the series
Next edition
NR-XTECH-MANUFACTURING-GLOBAL-2027-v1.0.0
Latest version
resolve the concept DOI or the registry record
Correction route
Registry correction pathway
Notice types
erratum · addendum · supersession · withdrawal

C.3Corrections log

0correction notices. No edition has been released yet, so none can be corrected; the log below lists each edition’s current version.

وەشانوەشانDateدۆخگۆڕانکاریNotice
XT-13NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0October 2026پێشنووسBaseline Edition 2026, inaugural annual edition,هیچ

Notice types: erratum, addendum, supersession, withdrawal. A correction is a new version with a published notice; the earlier version stays resolvable, and no edition is ever edited in silence.

C.4Open record

This edition’s open record

Publication ID
NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Desk identifier and series alias
NR-GCRI-XT-13-2026-BASELINE-v1.0.0 · NR-XTC-XT-13-2026-BL
Collection
NR-COL-2026-BASELINE (IsPartOf at deposit)
DOI
Concept and version DOI at deposit, on Zenodo with DataCite metadata
Versions
Each correction is a new version (isNewVersionOf); the concept DOI resolves to the latest
Bundle
RO-Crate 1.2 with CITATION.cff, CodeMeta and PROV-O provenance; a signed manifest
مۆڵەت
CC BY 4.0 (SPDX CC-BY-4.0) for original material; metadata CC0 1.0

Credit and identity

ORCID
Your iD in the deposit and the contribution record; DataCite can then add the work to your ORCID record
ROR
Your organisation by its ROR identifier, never by a typed name alone
CRediT
Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Validation, Visualisation, Writing, review and editing
هەژمار
None needed to contribute; never a password

Find and follow

Search the open indexes for Additive and Advanced Manufacturing; software is cited by its SWHID from Software Heritage, and a quantified scenario run is preregistered on OSF before it is run. Annotation is your choice: Hypothesis opens this page in its own viewer.

Mirrors and harvest

The DOI is canonical. At release each signed bundle is also given an IPFS content identifier and a bloxberg anchor as mirrors; both are listed in the record once they exist. Zenodo exposes every record over OAI-PMH, and reviews and endorsements can arrive through COAR Notify where the repository supports it.

InvenioRDM metadata for a contribution on Additive and Advanced Manufacturing, prefilled from this page
{
  "metadata": {
    "resource_type": {
      "id": "dataset"
    },
    "title": "Evidence on Additive and Advanced Manufacturing for Nexus Reports",
    "publication_date": "YYYY-MM-DD",
    "creators": [
      {
        "person_or_org": {
          "type": "personal",
          "family_name": "Your family name",
          "given_name": "Your given name",
          "identifiers": [
            {
              "scheme": "orcid",
              "identifier": "0000-0000-0000-0000"
            }
          ]
        },
        "affiliations": [
          {
            "id": "ROR identifier of your organisation"
          }
        ]
      }
    ],
    "description": "What it is, where its record is kept and how it bears on Exponential Technology Report 2026: Additive and Advanced Manufacturing.",
    "rights": [
      {
        "id": "cc-by-4.0"
      }
    ],
    "subjects": [
      {
        "subject": "Nexus Reports"
      },
      {
        "subject": "Additive and Advanced Manufacturing"
      },
      {
        "subject": "Exponential Technology Report · XT-13"
      }
    ],
    "related_identifiers": [
      {
        "identifier": "https://therisk.global/nexus-reports/editions/xt-13/",
        "scheme": "url",
        "relation_type": {
          "id": "issupplementto"
        },
        "resource_type": {
          "id": "publication-report"
        }
      }
    ],
    "version": "1.0.0"
  },
  "custom_fields": {},
  "access": {
    "record": "public",
    "files": "public"
  },
  "files": {
    "enabled": true
  },
  "parent": {
    "communities": {
      "default": "nexusreports"
    }
  }
}

C.5Where this edition sits among the six pillars

Foundry seals the evidence and Universe tests it; Reports publishes it; Standards takes its corrections and Academy teaches from it.

  1. F03 Sealed observations and indicator series Foundry Sealed observations and indicator series behind a profile (closeout).
  2. F04 After-action and scenario findings for Universe After-action and scenario findings for chapters 10 and 13 (after action review).
  3. F05 National Portfolio movement for chapter Foundry National Portfolio movement for chapter 11 (after action review).
  4. Applied in editions Standards Nexus Standards: applied in editions.
  5. XT-13 edition Reports Additive and Advanced Manufacturing 2026, published in every format with its sources, citation and corrections.
  6. F06 Method and correction findings as change Standards Method and correction findings as change proposals (correction).
  7. F12 Q4 synthesis informs the next-year Universe Q4 synthesis informs the next-year mandate (renewal).
  8. Taught in the open Academy Risk Academy: taught in the open.

What Foundry and Universe hand to this edition, and what it hands to Standards, Universe and Academy. From the programme spine; XT-13 is a drafted Baseline Edition, so these handoffs run from its first operational quarter.

ڕادەستکردنBetweenWhat crosses, and when
F03Foundry to ReportsSealed observations and indicator series behind a profile (closeout).
F04Universe to ReportsAfter-action and scenario findings for chapters 10 and 13 (after action review).
F05Foundry to ReportsNational Portfolio movement for chapter 11 (after action review).
RingNexus Standards to ReportsNexus Standards: applied in editions.
F06Reports to Nexus StandardsMethod and correction findings as change proposals (correction).
F12Reports to UniverseQ4 synthesis informs the next-year mandate (renewal).
RingReports to Risk AcademyRisk Academy: taught in the open.

Downloads

Draft, not yet releasedReview copies of a draft in stewardship review. The released edition carries its DOI and replaces them.

  • Print

    • PDF, A4

      The designed print edition, A4: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF113 pages1.0 MBTagged, with bookmarks

      SHA-256 9f9c0bdd112c9edd155a42b7deb0eb16a83972daf6aec20f918c9a6922d6a487

    • PDF, US Letter

      The designed print edition, US Letter: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF118 pages1.1 MBTagged, with bookmarks

      SHA-256 c5ba6a27b592bc5d4e5fc9678986c1ea05dc4babaca6d264fe12924a87a0f417

  • Web edition

  • Data bundle

    • Indicators, CSV

      16 indicators with unit, year, status and source

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.csv1 KB

      SHA-256 ec47045da100257a326321c531b49ec523a5f9c59161000e0c8d1978ca168b69

    • Indicators, JSON

      The same indicators with the edition’s identity and licence

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.json2 KB

      SHA-256 e578505481cdacf1ca29fcbcad3010be8d9b2541e4721bc2eb8304d90412c885

    • Findings, CSV

      12 findings with status, evidence-quality level and references

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-findings.csv3 KB

      SHA-256 ac3ad24fc5cc470e585bd6806a983db4c2224f62f35c653e1c9852511e02a925

  • Citation files

    • Citation, BibTeX

      For LaTeX and reference managers

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.bib1 KB

      SHA-256 af46b873e727338fcfbee92dfb1a02521c9d3ab443debfe0dd537fcdb45b0df1

    • Citation, RIS

      For Zotero, EndNote and Mendeley

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.ris1 KB

      SHA-256 8de9cef71c5448dc0b204326d1399f299e681eec8cb4b05fadb79cb6cd0fb600

    • Citation, CITATION.cff

      Citation File Format 1.2.0, for GitHub, Zenodo and software catalogues

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.cff1 KB

      SHA-256 13283b08157f9aa4185284587c66dec81aece9e75d2ca6a40564a630aeba9282

Check a file with its SHA-256: shasum -a 256 <file> (macOS, Linux) or Get-FileHash <file> (Windows). Text, tables and figures by Nexus: CC BY 4.0; each source keeps its own licence.

Cite this annex

Valadbaygi, S. (Ed.). (2026). Annex C: References and record. In Exponential Technology Report 2026: Additive and Advanced Manufacturing (Baseline Edition 2026, Report No. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE) [Draft under review]. The Global Centre for Risk and Innovation (GCRI).

Every citation form of the whole report, BibTeX and RIS included, is on the edition home. Cite this report

ڕاپۆرتەکانبەشداربە

Send evidence or a correction on Additive and Advanced Manufacturing.

Reports is the Consortium’s quarterly publication, written by six desks. This page sits with the GCRI Systems Evidence desk. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work. Sent to the wrong desk, it is forwarded, not refused.

مێزی بەڵگەی سیستەمەکانی GCRIتەکنەلۆجیای ئێکسپۆنێنشیاڵ

CC BY 4.0 Free to read. Text and figures: CC BY 4.0. Data: CC0 1.0. Authors keep copyright. Published by GCRI Canada.