Methodik
How the edition was made: methods, the model card, the evidence cut and its age, the acceptance record and the glossary.
Inhalt
- ·Edition home
- ·Executive summary
- 1Additive manufacturing is production infrastructure that is still being qualified
- 2Key findings
- 3Systems and sectors at baseline
- 4Risks and capability
- 5Defence demand outruns part acceptance and supply
- 6Readings from the other desks
- 7The 2027 agenda
- 8Systems in depth
- AMethodik
- A.1 Methods
- A.2 Model card, Additive manufacturing System Model v0
- A.3 The baseline evidence cut
- A.4 Evidence age and coverage
- A.5 Evidence cards, two anchor sources
- A.6 Publication acceptance record
- A.7 Status words
- A.8 How the edition is made, released and corrected
- A.9 Glossary and abbreviations
- A.10 Technical annex
- BData appendix
- CReferences and record
- ·Complete edition, for print
A.1Methoden
The global baseline uses published values and four simple derivations. Each is shown in full so that any reader can reproduce it.
| Nein. | Derivation | Calculation | Ergebnis |
|---|---|---|---|
| (1) | Change in Stratasys revenue, 2025 over 2024 | 551.1 ÷ 572.5 − 1 | −3.7% |
| (2) | Navy parts installed as a share of parts placed into development | 20 ÷ 120 | about 17%, at least |
| (3) | Services revenue implied by the 48% share | 0.48 × 24.2 | ≈ USD 11.6 billion |
| (4) | Growth implied by two rounded revenue values | 24.2 ÷ 21.9 − 1 | 10.5%, against 10.9% reported |
| Strength | Definition |
|---|---|
| STRONG | a disruption in the source system has historically changed the target system’s service or output within one season, in more than one region |
| MODERATE | an effect is documented but buffered or slower |
| WEAK | an effect is plausible but not documented at global scale |
| Kennzeichnung | Regel |
|---|---|
| Gemeldet | value as issued by its source, with year |
| Inferred | reasoned from cited evidence; never a measurement |
| Geschätzt | Nexus analytical value with stated method |
| Szenario | conditional on stated assumptions |
| Expert input | structured editorial judgement awaiting evidence |
A.2Model card, Additive manufacturing System Model v0
- Model ID
- MDL-XT13-MANUFACTURING · v0.1
- Zweck
- represent additive and advanced manufacturing as production infrastructure coupled to energy, powder and gas supply, materials, finance, workforce, occupational health and export controls
- Familie
- graph-based system of systems
- Eingaben
- the cited sources of this edition; no proprietary data
- Methode
- expert-specified coupling strengths (STRONG · MODERATE · WEAK) from assessments and analogue events
- Validierung
- none yet, first validation against federation evidence in 2027
- Unsicherheit
- qualitative; strengths are hypotheses, not measurements
- Gültigkeitsbereich
- global scale; not for asset-, site- or country-level use
- Reproduzierbarkeit
- strength table and sources published in this edition
typed in v0
documented within one season
documented, buffered
plausible, undocumented
A.3The baseline evidence cut
Every Nexus edition is published from a frozen evidence cut. The global baseline cut is documentary: it pins the exact edition of every source cited. Federation cuts begin with the first national Foundry cuts in 2027.
- Cut ID
- DC-XTECH-MANUFACTURING-GLOBAL-2026-B0
- Art
- baseline documentary cut
- Resolution policy
- pinned · as of 30 September 2026
- Sources pinned
- 42 cited sources, each at the edition and access date in the references
- Modellläufe
- none at baseline, analytical values are stated with their method
- Digest
- computed at freeze and recorded in the publication record
- Supersedes
- nothing, first cut of the series
- Superseded by
- the 2027 additive manufacturing annual cut
Herkunftskette
- 01
source edition
- 02
pinned citation
- 03
finding
- 04
page
- 05
publication record
| Element | Baseline 2026 | 2027 global annual |
|---|---|---|
| Quellen | cited global publications, pinned by edition | national, regional and sector cuts through one graph |
| Analysis | stated methods and editorial estimates | typed analysis specifications |
| Modelle | Additive manufacturing System Model v0 specification | model runs with receipts |
| Befunde | twelve baseline findings | findings re-bound to federation evidence |
| Prüfung | five passes scheduled | five passes on the exact digest |
A.4Evidence age and coverage
A 2026 global edition rests on evidence observed in many different years. This page shows each time base, so that no single year label hides older evidence.
| Indikator | Beobachtet | Freigegeben | Takt | Next release |
|---|---|---|---|---|
| Market size | 2025 | Feb 2026 | jährlich | next Wohlers Report |
| Machine-maker results | 2025 | Mar 2026 | vierteljährlich | next results |
| Machine-maker Chapter 11 | 2025 | Jul 2025 | je Ereignis | sale outcomes |
| Navy parts counts | 2026 | Jun 2026 | je Ereignis | next Navy report |
| AM-Bench | 2025 | Nov 2025 | every three years | AM Bench 2028 |
| Reference model | 2024 | Jul 2024 | periodisch | revision |
| Energy estimate | 2015 | 2015 | one-off | new studies |
| NIOSH evaluation | 2025 | Feb 2025 | je Ereignis | further evaluations |
| System | Abdeckung | Thinnest dimension |
|---|---|---|
| Market | PARTIAL | market figures from the reports |
| Defence | PARTIAL | independent review of counts |
| Normen | GOOD | text of work items |
| Energie | THIN | metal machine energy |
| Angebot | THIN | powder volumes |
| Kompetenzen | THIN | workforce numbers |
| Health and safety | PARTIAL | exposure across facilities |
| Steuerung | PARTIAL | licensing and enforcement data |
| Feld | Source that would fill it | Blocker |
|---|---|---|
| Wohlers Report market figures from the reports themselves | Wohlers Report 2025 and 20262324 | the reports are subscription products; figures come from a publisher release23 and trade summaries12 |
| Specific energy and inert gas use of metal machines on a common basis | peer-reviewed footprint studies | metal studies3132 give values that vary with geometry, orientation and capacity use, such as 20.3 to 30.5 MJ/kg in one simulation; no common basis |
| Metal powder supply and demand volumes | powder producers, trade statistics | only supplier commentary found; it gives no volumes33 |
| Part acceptance rates, yield and scrap by process and sector | operators, defence programmes, standards committees | not published on a common basis |
| Machine-maker impairments and order books from the filings | company filings and results releases30 | only one release read: a USD 251 million goodwill impairment at Colibrium Additive in 202430 |
| Installed base and utilisation of machines by country | industry and trade statistics | not retrieved |
| China additive manufacturing output from official statistics | national statistics37 | the statistics bureau gives growth only, 52.5% in 2025, and no unit or value total37 |
| Licences and amendments under the 2024 BIS interim final rule | Federal Register28 | rule text read; licensing data not published |
| Independent review of Navy additive parts counts and lead-time figures | GAO, inspector general or academic review | official releases only78 |
| Navy part acceptance requirements for printed metal parts | Navy technical publications | not read; only a news feature on SUBSAFE qualification26 |
| Additive manufacturing workforce size and skills gaps | national statistics, industry surveys343536 | not retrieved; capability rung stays LISTED |
| Medical and dental additive device volumes | FDA, regulators, industry bodies27 | not retrieved; no figure used |
| Construction and consumer additive manufacturing data | agencies, industry bodies | not retrieved; no figure used |
| Exposure data from facilities other than one NIOSH evaluation | occupational health agencies | one evaluation read20 |
| Capability rungs beyond standards and planning | agencies, operators, laboratories | not reviewed |
A.5Evidence cards, two anchor sources
Published by NIST as a continuing benchmark series with a 2025 conference. 8 metal and 1 polymer benchmark sets and 85 challenge submissions. Role: binds INF-011. Coverage: controlled measurements, not production data.
EVD-XT13-001
NIST AM-Bench 202512
Issued by a US Navy command through DVIDS. Official release. Role: binds GOV-007 and the defence tile. Coverage: one navy programme.
EVD-XT13-002
NAVSUP Weapon Systems Support release of 30 June 20267
| Dimension | EVD-XT13-001 | EVD-XT13-002 |
|---|---|---|
| Completeness | metals and polymers; one conference cycle | one navy programme; counts only |
| Timeliness | conference in November 2025 | released June 2026 |
| Revision | data archived for public use | no revision history on the page |
| Method transparency | methods and data published | counts without method |
| Externe Validierung | blind challenge problems | none stated |
Evidence cards to follow in 2027
A.6Publication acceptance record
Editorial self-check at evidence close. Every applicable item carries a disposition; the remaining items are review, approval and deposit.
| Gruppe | Bereich | Elemente | Bestanden | N/A | Ausstehend |
|---|---|---|---|---|---|
| D1 | Identity and scope | 8 | 8 | 0 | 0 |
| D2 | Source and data | 12 | 9 | 1 | 2 |
| D3 | Analysis and models | 12 | 3 | 8 | 1 |
| D4 | Findings and claims | 9 | 8 | 0 | 1 |
| D5 | Figures, tables, maps | 10 | 6 | 2 | 2 |
| D6 | Editorial and citations | 10 | 8 | 0 | 2 |
| D7 | Review and approval | 13 | 0 | 0 | 13 |
| D8 | Artefact and design | 12 | 7 | 0 | 5 |
| D9 | Registry and release | 9 | 0 | 0 | 9 |
Publication gate
- Conditions met
- 14 of 23 at evidence close
- Blocking problems
- none recorded
- Open conditions
- reviews, approval of the exact digest, deposit, registry pointer
Not applicable at baseline
- Modellläufe
- first runs in Q1 2027
- Karten
- plates in Q2 2027
- Waivers
- keine
A.7Status words
| Status | Was es bedeutet |
|---|---|
| Beobachtet | Measured directly and published by the source. |
| Gemeldet | Published statistics of an official or institutional source. |
| Erklärt | Stated by the body concerned; not independently measured. |
| Geschätzt | A Nexus estimate from cited evidence, with its method in Annex A. |
| Modelliert | Produced by a stated model from cited inputs. |
| Inferred | Reasoned from cited evidence; not measured. |
| Vorhersage | A projection by the cited source. |
| Simulated | A simulation result under stated assumptions. |
| Szenario | A conditional statement under stated assumptions; never a prediction. |
| Expert input | Expert judgement, recorded with its basis. |
| Candidate | Proposed for a later edition; not yet evidence. |
| Evidence-quality levels (EQL 1 to 5) grade the source behind a value; they are not a score of the subject. | |
A.8How the edition is made, released and corrected
Every edition is built from a sealed evidence cut, reviewed under three keys, signed and deposited before any site shows it as published; corrections go to Nexus Standards as change proposals and feed the next cut.
| Schritt | Was geschieht | Quelle |
|---|---|---|
| 01 Evidence arrives from the pillars | Foundry seals observations and indicator series, Universe hands over after-action and scenario findings, and contributions are screened at every gateway, including this site’s. | |
| 02 The cut is sealed | On the cut date the evidence is pinned under one identifier, so anyone can rebuild the edition from exactly what it was built on. | |
| 03 The edition is assembled | The edition is drafted from its template and content pack. Agents may draft; they never publish and never decide. | |
| 04 The keys turn | At the publisher of record the truth key comes first: every value is checked against its source or stated method before the meaning and capital keys turn. No edition moves on until every key has been turned by a named steward. | |
| 05 The gate opens | A named approver releases one exact digest of the edition; any change after this point is a new version, never a silent edit. | |
| 06 Signed and deposited | The PDF, the web edition and the data bundle are signed together with a manifest and an RO-Crate description, and deposited on Zenodo with a concept and a version DOI. | |
| 07 Published on its desk’s site | Only then does the edition show as published on its desk’s Reports site, and the Collection lists it as a part. | |
| 08 Corrections go to Standards | Method and correction findings go to Nexus Standards as change proposals; citations, corrections and new contributions feed the next evidence cut. |
A teaching model of the process, not a forecast and not a record of any run; dates and counts on this page come from the programme record. Sources: Reports governance at GCRI Canada (2026); Zenodo, repository of record for Reports deposits (2026).
Lifecycle, one state at a time: Draft, Computed, Evidence bound, Reviewed, Approved for release, Published, Corrected, Superseded. This edition is a draft.
A.9Glossary and abbreviations
| Begriff | Bedeutung |
|---|---|
| Baseline Edition | the inaugural annual edition that fixes the reference state for the series |
| WEFH+B | water, energy, food, health and biodiversity, the national nexus core |
| Kopplung | a typed dependency through which one system transmits to another |
| Sicherungslücke | the share of losses not covered by insurance |
| Capability ladder | LISTED → EXISTS → ADEQUATE → TESTED → DEMONSTRATED |
| EQL | evidence-quality level, 1–5 |
| Evidence cut | a frozen resolution of exact sources and versions |
| NNC · NLC · NWG | National Nexus Consortium · National Leadership Council · National Working Groups |
| Abbreviation | Expansion |
|---|---|
| AM | additive manufacturing |
| AM-Bench | NIST additive manufacturing benchmark series |
| AMS | NIST Advanced Manufacturing Series |
| BIS | US Bureau of Industry and Security |
| DED | directed energy deposition |
| ECCN | Export Control Classification Number |
| IDEF0 | integration definition for function modelling |
| LPBF | laser powder bed fusion |
| NAVSEA | US Naval Sea Systems Command |
| NIOSH | US National Institute for Occupational Safety and Health |
| PBF | powder bed fusion |
| WAAM | wire-arc additive manufacturing |
A.10Technical annex
| Position | Annex | Inhalt | Status |
|---|---|---|---|
| A.1 | Indicator definitions | the global indicator set, with units and sources | IN THIS EDITION |
| A.2 | Coupling strengths | the twenty-cell matrix and its rationale | IN THIS EDITION |
| A.3 | Scenario specification | SCN-XT13-QAL-01 assumptions and signposts | IN THIS EDITION |
| A.4 | Capability placements | rung evidence for fifteen functions | IN THIS EDITION |
| A.5 | Model diagnostics | first runs and validation | 2027 |
| A.6 | Sensitivitätsanalysen | influence of coupling strengths | 2027 |
| A.7 | Cluster notes | cards for the major additive manufacturing and powder clusters | 2027 |
| A.8 | Review statements | pass-by-pass review record | AT RELEASE |
A.1 · indicator definition: specific energy consumption
- Construct
- process energy used per kilogram of material deposited in a build
- Einheit
- megajoules per kilogram
- Methode
- energy metering over build experiments, with volume converted to mass by an assumed density
- Quelle
- Baumers, Tuck and Hague, 201514
- Unsicherheit
- estimated; depends on build packing and capacity utilisation
- Bekannte Grenzen
- polymer platforms only; not comparable with metal machines or with cool-down and post-processing energy
Notes
Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references
- 23Wohlers Associates, powered by ASTM International (ed.), 3D printing and AM market grows 9.1% according to Wohlers Report 2025 (press release, Washington, 29 April 2025, distributed by PR Newswire and read in full on a republishing page; the report has been published for 30 consecutive years; global AM industry grew 9.1% to USD 21.9 billion; growth mostly in Asia and China; system makers declined while services, software and materials grew; the report itself was not opened). Wohlers Associates, Washington. Observation year 2024. Accessed 2026-11-05.back
- 24Wohlers Associates (ed.), Wohlers Report 2026 (report overview page on the Wohlers platform read: released 17 February 2026; the page gives no figures and the report itself, a subscription product, was not opened; the figures used come from the trade summary [2]). Wohlers Associates, Washington. Observation year 2025. Accessed 2026-11-05.back
- 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
- 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
- 31Kota, A., Nallagundla, V.R., Assuad, C.S.A., Martinsen, K. and Simhambhatla, S., Parametric investigation, formulation, and benchmarking of energy consumption for the powder bed fusion process, Cleaner and Responsible Consumption 14, 100205, September 2024 (Crossref record and abstract read: total energy per part falls by up to 32.68% with higher capacity use and by 50% with a changed part orientation; doi 10.1016/j.clrc.2024.100205). Elsevier, Amsterdam. Observation year 2024. Accessed 2026-11-05. doi:10.1016/j.clrc.2024.100205back
- 32Gee, K. and Hart, A.J., Parametric analysis of relationships among part geometry, build time, and energy consumption for laser powder bed fusion, ASME 2024 International Design Engineering Technical Conferences, 29th Design for Manufacturing and the Life Cycle Conference, V005T05A004, August 2024 (Crossref record and abstract read: specific energy consumption of 20.3 to 30.5 MJ/kg for fifteen 100 g AlSi10Mg parts on a simulated machine; doi 10.1115/DETC2024-142824). American Society of Mechanical Engineers, New York. Observation year 2024. Accessed 2026-11-05. doi:10.1115/DETC2024-142824back
- 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back
- 30GE Aerospace (ed.), GE Aerospace announces third quarter 2024 results (company release, 22 October 2024, read: interim impairment test at the Colibrium Additive reporting unit, given declines in the additive manufacturing industry due to slower adoption of the technology, gave a non-cash goodwill loss of USD 251 million). GE Aerospace, Evendale. Observation year 2024. Accessed 2026-11-05.back
- 37National Bureau of Statistics of China (ed.), National economy pushed forward with innovation-led and high-quality development and expected targets achieved successfully in 2025 (press release, 19 January 2026, read: production of 3D printing devices grew 52.5% in 2025; no unit or value total given). NBS, Beijing. Observation year 2025. Accessed 2026-11-05.back
- 28Bureau of Industry and Security (ed.), Commerce Control List additions and revisions; implementation of controls on advanced technologies consistent with controls implemented by international partners, interim final rule, Federal Register 89 FR 72926, 6 September 2024 (text opened: new ECCN 2B910 for additive manufacturing equipment designed to produce metal or metal alloy components; effective 6 September 2024; comments due 5 November 2024; correction 89 FR 105448 of 27 December 2024). BIS, Washington. Observation year 2024. Accessed 2026-11-05.back
- 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
- 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
- 26LaGrone, S., The Navy’s big 3-D printing bet (feature, USNI News, 23 June 2026; full text read through the publisher’s public feed: the Additive Manufacturing Center of Excellence in Danville, Virginia, opened in 2023 with USD 35 million from Virginia; wider use of printed parts is limited by Navy part acceptance rules, contract language and design rights; SUBSAFE qualification under way). US Naval Institute, Annapolis. Observation year 2026. Accessed 2026-11-05.back
- 34Alexander Daniels Global (ed.), The 2026 additive manufacturing salary survey signals a shift toward operational maturity (article on 3DPrint.com, 13 January 2026, read: 10th edition of the survey; production the most in-demand discipline, with 75% of AM companies planning to hire in it; the survey report itself was not opened; recruiter survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.back
- 35VonBank, D., What the 2026 post-processing survey reveals about the future of AM (article on 3DPrint.com, 24 March 2026, read: fifth edition of the PostProcess Technologies survey; time and labour to finish parts named as a main constraint on scaling; the survey report itself was not opened; vendor survey, weak evidence). 3DPrint.com, Chicago. Observation year 2026. Accessed 2026-11-05.back
- 36Kirchain, R., Moore, E. and Field, F., Preparing the advanced manufacturing workforce: a study of occupation and skills demand in the 3D/additive manufacturing industry, Workforce Roadmap series, June 2022 (repository record read; interviews on middle-skilled technical occupations). Massachusetts Institute of Technology, Cambridge. Observation year 2022. Accessed 2026-11-05.back
- 27Food and Drug Administration (ed.), Technical considerations for additive manufactured medical devices: guidance for industry and Food and Drug Administration staff, issued 5 December 2017 (guidance document opened; draft issued 10 May 2016; notice of availability 82 FR 57462). FDA, Silver Spring. Observation year 2017. Accessed 2026-11-05.back
- 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
- 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
- 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back