Skip to content

Draft, not yet released. In stewardship review. Not indexed until the first approved release.

Data appendix

The indicator set with its sources, the source registers, the licences of every kind of material and the formats of the edition.

9 min read0 figures8 tables14 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

目次
  1. ·Edition home
  2. ·Executive summary
  3. 1Additive manufacturing is production infrastructure that is still being qualified
  4. 2Key findings
  5. 3Systems and sectors at baseline
  6. 4Risks and capability
  7. 5Defence demand outruns part acceptance and supply
  8. 6Readings from the other desks
  9. 7The 2027 agenda
  10. 8Systems in depth
  11. A方法論
  12. BData appendix
    1. B.1 The indicator set
    2. B.2 Global source register
    3. B.3 Regional reading, additive manufacturing across ten clusters
    4. B.4 Cluster card: metal powder and qualified alloy supply chain
    5. B.5 How countries appear in the additive manufacturing edition
    6. B.6 Licences
    7. B.7 Formats and provenance
  13. CReferences and record
  14. ·Complete edition, for print

B.1The indicator set

Table B.1Global baseline indicator set
指標値単位年状況出典
Global additive manufacturing revenue21.9USD billion2024報告値1
Growth in revenue9.1パーセント2024報告値1
Decline in machine sales26パーセント2024報告値1
Share of revenue from printing services47パーセント2024報告値1
Global additive manufacturing revenue24.2USD billion2025報告値2
Growth in revenue10.9パーセント2025報告値2
Growth in printing services15.5パーセント2025報告値2
Growth in machine sales3.6パーセント2025報告値2
Growth in Asia-Pacific19.8パーセント2025報告値2
Stratasys revenue551.1USD million2025報告値3
3D Systems revenue386.9USD million2025報告値4
Navy additive parts installed20parts2026報告値7
Navy lead-time cut for some components70percent, up to2026報告値7
Specific energy, polymer laser sintering113.66MJ/kg2015報告値14
AM-Bench 2025 challenge submissions85submissions2025報告値12
Navy maritime industrial base workforce need250,000workers2025報告値8

B.2Global source register

The governed source set behind this edition. Each source keeps its authority, coverage, cadence and role; categories describe origin, not truth.

Domains bound by the register

  • INF
  • FIN
  • GOV
  • MIN
  • ENE
  • HLT
  • TRD
  • CLI
  • DAT
  • WAT
Table B.3Global source register
出典カテゴリー対象範囲Period周期役割
Trade summary of Wohlers Report 20251trade pressglobal2024年次market size
Trade summary of Wohlers Report 20262trade pressglobal2025年次market size and regions
Stratasys release3listed companyone company2025四半期ごとresults
3D Systems release4listed companyone company2025四半期ごとresults
Nano Dimension filing5listed companyone company2025年次consolidation
DVIDS release7US governmentUS Navy2026事象ごとparts counts
NIST AM-Bench12national standards body方法2025every three yearsbenchmarks
Baumers et al.14conference paper方法2015one-offenergy
NIOSH evaluation20US government via trade pressone facility2025事象ごと曝露
SIPRI paper21research instituteglobal2017one-offcontrols

B.3Regional reading, additive manufacturing across ten clusters

Regional plates follow with the regional editions. This page gives the regional reading of additive manufacturing production and exposure in table form and ranks no region.

Table B.4Regional reading, additive manufacturing across ten clusters
地域Principal hazardsSystems most exposedBaseline evidence
北米defence demand; export controls; machine makers under strainproduction, supplyNavy7; company results34
南アメリカearly industrial useproductionregional evidence (not bound)
ヨーロッパrevenue growth of 9% in 2025production, researchtrade summary2
Eurasiadefence and research programmesresearch, supplyregional evidence (not bound)
中東・北アフリカearly industrial useproductionregional evidence (not bound)
アフリカskills and accessworkforceregional evidence (not bound)
南アジアnational manufacturing programmesproduction, skillsregional evidence (not bound)
東アジアfastest regional growth; machine exportsproduction, supplytrade summary2
ASEANfabrication partnersproduction, supplyregional evidence (not bound)
Oceania-Pacificwire-arc and metal programmes for defenceproductioncompany announcement9

B.4Cluster card: metal powder and qualified alloy supply chain

  • supply chain
  • metal powder
  • part acceptance
  • single point
Systems in view
powder producers, machine makers, part acceptance programmes, defence primes
Defining events
defence demand growth and the 2024 US machine control722
連動
MIN → INF powder; TRD → MIN controls
Capability evidence
supplier commentary on powder bottlenecks33
ギャップ
powder volumes; reserves; qualified sources per alloy
Agenda items
M-03 · M-04

Production use needs powder qualified for each alloy and process, and volumes are not published [33].

SUPPLY

Qualified powder per alloy

The US Navy reports additive parts moving into production and cites strain on casting and forging [7].

DEMAND

Defence pull

Reported responses include supplier offers of assured powder supply and part acceptance of processes rather than parts. None is documented at scale here [7] [33].

RESPONSE

Capacity and part acceptance

B.5How countries appear in the additive manufacturing edition

Countries enter the additive manufacturing edition through the readiness chapters of their own national editions, on one card grammar. They are read against peer distributions and thresholds, never ranked.

Table B.5How countries appear in the additive manufacturing edition
Card field表示内容出典
WEFH+B stateeach core system against peer distribution bandsnational edition
連動the national dependency matrixnational edition
Risk objectsthe national risk portfolionational edition
Capability rungsthe national capability laddernational edition
Evidence ageoldest and newest source datesnational source register

Editions in the 2026 Baseline programme

26国

countries and unions

10regional

clusters

16global

flagship and sector

14strategic

システム レポート

20frontier

technology reports

How to read a country card

  • Each system is shown against the distribution of its peers, with thresholds where they exist
  • Couplings and risk objects come from the country’s own national edition
  • Capability rungs record evidence, not a judgement of institutions
  • Evidence age is printed, so older national data are visible as such
Table B.6National Baseline Editions in the 2026 programme
ウェーブCountries and unions状況
W0カナダISSUED
W1United States, United Kingdom, France, Germany, Italy, Japan, European Union, SwitzerlandPLANNED
W2Mexico, Brazil, Argentina, Türkiye, Russian Federation, Saudi Arabia, United Arab Emirates, South Africa, Senegal, Kenya, African Union, India, China, Republic of Korea, Indonesia, Singapore, AustraliaPLANNED

B.6ライセンス

Table B.7Licences of each kind of material
資料ライセンス
TextCC BY 4.0
データon the licence of each source; Nexus tables CC BY 4.0
数字Nexus figures CC BY 4.0; third-party as credited
地図boundary source and licence printed on each plate
メタデータCC0 1.0, as Zenodo publishes it
Third-party data, figures and textThe source’s own licence, credited where it is used; never relicensed
Nexus-authored text, tables and figures: CC BY 4.0 (SPDX CC-BY-4.0). Map plates print their boundary source and licence.

B.7Formats and provenance

Table B.8This edition in every format
形式種別状況概要識別子
Web editionHTMLこのサイトDraft in stewardship review; every value resolves to its source.NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Print editionPDFAt releaseA4 portrait · screen, print and archival PDF, signed with the web edition at release.NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-v1.0.0
Indicator dataCSV · JSONこのサイト16 indicators with unit, year, status and source; the machine-readable copy ships with the evidence bundle at release.NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE data release v1
数字SVG · PNGこのサイト4 on the web edition: headline figure, figure 1.3, coupling instrument, capability ladder.FIG-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-*
SlidesPDF記録なしNo slide deck is recorded for this edition.
エビデンス・ブリーフHTML · PDF記録なしNo evidence brief is recorded for this edition.
Dataset with DOIDataCiteAt releaseConcept and version DOI are minted at deposit; none is recorded yet.

来歴

Edition pack
The edition’s content pack (JSON), from which the print and web editions are built
証拠の区切り
DC-XTECH-MANUFACTURING-GLOBAL-2026-B0, closed 30 September 2026
再現性
sourced values cited; analytical values reproducible from stated parameters
Self-check
14 of 23 at evidence close; a fail on any item blocks release
審査
five passes scheduled before release (in Annex C)
正式な発行者
The Global Centre for Risk and Innovation (GCRI) for the Nexus Consortium
訂正
Registry correction pathway; upheld corrections are published as notices with a new version

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 1Voulpiotis, F. (3Dnatives), Wohlers Report 2025: 9.1% growth for the global additive manufacturing market (trade article, 14 April 2025; weak evidence: a trade summary of a commercial report; reports 2024 market about USD 21.9 billion, machine sales down about 26%, services 47% of revenue). 3Dnatives, Paris. Observation year 2024. Accessed 2026-11-03.back
  2. 2Voulpiotis, F. (3Dnatives), Wohlers Report 2026: growth continues, but caution defines the AM market (trade article, 17 February 2026; weak evidence: a trade summary of a commercial report; reports 2025 revenue USD 24.231 billion, up 10.9%, services up 15.5% with 48% share, machine sales up 3.6%, Asia-Pacific up 19.8%, Europe and the Americas up 9%). 3Dnatives, Paris. Observation year 2025. Accessed 2026-11-03.back
  3. 3Stratasys Ltd. (ed.), Stratasys releases fourth quarter and full year 2025 financial results (company release, 5 March 2026; revenue USD 551.1 million against USD 572.5 million in 2024; GAAP net loss USD 104.3 million). Stratasys, Rehovot and Eden Prairie. Observation year 2025. Accessed 2026-11-03.back
  4. 43D Systems Corporation (ed.), 3D Systems reports fourth quarter and full year 2025 financial results (company release, 9 March 2026; revenue USD 386.9 million, down 12%; Healthcare Solutions USD 179.6 million; Industrial Solutions USD 207.3 million). 3D Systems, Rock Hill. Observation year 2025. Accessed 2026-11-03.back
  5. 7Jones, M. (NAVSUP Weapon Systems Support), Shattering bottlenecks: NAVSUP WSS partners with DLA and NAVSEA on submarine advanced manufacturing (official release via the Defense Visual Information Distribution Service, 30 June 2026; nearly 120 additive parts in development, 20 installed, more than 1,400 cumulative days of delay removed, lead times cut by up to 70% for some components; not independently audited). US Navy, Mechanicsburg. Observation year 2026. Accessed 2026-11-03.back
  6. 14Baumers, M., Tuck, C. and Hague, R., Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance, Solid Freeform Fabrication Symposium proceedings, University of Texas at Austin (full text read; the year is inferred from the cited 2015 sources). Observation year 2015. Accessed 2026-11-03.back
  7. 12NIST (ed.), AM-Bench (program page; 2025 benchmarks 8 metal and 1 polymer sets; 85 challenge submissions; conference November 2025; AM Bench 2028 in planning). National Institute of Standards and Technology, Gaithersburg. Observation year 2025. Accessed 2026-11-03.back
  8. 8Maritime Industrial Base Program (ed.), Maritime Industrial Base Program highlights workforce mission at Virginia Tech (official release via the Defense Visual Information Distribution Service, event 18 September 2025; need for 250,000 skilled workers over a decade; Columbia-class and Virginia-class output goals for 2028). US Navy, Washington. Observation year 2025. Accessed 2026-11-03.back
  9. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  10. 20American Industrial Hygiene Association (ed.), NIOSH evaluates metals exposures at manufacturing facility (news item, 11 September 2025, on a NIOSH health hazard evaluation dated February 2025 with visits in March and May 2023; secondary summary, the evaluation itself was not opened). AIHA, Falls Church. Observation year 2025. Accessed 2026-11-03.back
  11. 21Brockmann, K. and Bauer, S., 3D printing and missile technology controls, SIPRI Background Paper, November 2017 (summary page read; machines, feedstock and digital build files). Stockholm International Peace Research Institute, Stockholm. Observation year 2017. Accessed 2026-11-03.back
  12. 9AML3D Limited (ed.), AML3D signs initial production parts order for US Navy submarines (ASX release, 17 September 2026; about AU$0.5 million; three copper-nickel components; 16 systems deployed; company forecast of up to 100 systems and 1,600 components by 2030 attributed to Navy forecasts; vendor announcement, weak evidence). AML3D, Adelaide. Observation year 2026. Accessed 2026-11-03.back
  13. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back
  14. 33Iliaifar, A. (Continuum Powders), Powder without pause: ensuring supply for advanced manufacturing (company blog post, 6 October 2025, read: many makers face bottlenecks in powder supply rather than machine capacity; shortages delay production and make processes harder to qualify; the company offers powder from reclaimed scrap; no volumes given; supplier commentary, weak evidence). Continuum Powders, Houston. Observation year 2025. Accessed 2026-11-05.back

Downloads

Draft, not yet releasedReview copies of a draft in stewardship review. The released edition carries its DOI and replaces them.

  • 印刷

    • PDF, A4

      The designed print edition, A4: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF113 pages1.0 MBTagged, with bookmarks

      SHA-256 9f9c0bdd112c9edd155a42b7deb0eb16a83972daf6aec20f918c9a6922d6a487

    • PDF, US Letter

      The designed print edition, US Letter: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF118 pages1.1 MBTagged, with bookmarks

      SHA-256 c5ba6a27b592bc5d4e5fc9678986c1ea05dc4babaca6d264fe12924a87a0f417

  • Web edition

  • データバンドル

    • Indicators, CSV

      16 indicators with unit, year, status and source

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.csv1 KB

      SHA-256 ec47045da100257a326321c531b49ec523a5f9c59161000e0c8d1978ca168b69

    • Indicators, JSON

      The same indicators with the edition’s identity and licence

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.json2 KB

      SHA-256 e578505481cdacf1ca29fcbcad3010be8d9b2541e4721bc2eb8304d90412c885

    • Findings, CSV

      12 findings with status, evidence-quality level and references

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-findings.csv3 KB

      SHA-256 ac3ad24fc5cc470e585bd6806a983db4c2224f62f35c653e1c9852511e02a925

  • Citation files

    • Citation, BibTeX

      For LaTeX and reference managers

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.bib1 KB

      SHA-256 af46b873e727338fcfbee92dfb1a02521c9d3ab443debfe0dd537fcdb45b0df1

    • Citation, RIS

      For Zotero, EndNote and Mendeley

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.ris1 KB

      SHA-256 8de9cef71c5448dc0b204326d1399f299e681eec8cb4b05fadb79cb6cd0fb600

    • Citation, CITATION.cff

      Citation File Format 1.2.0, for GitHub, Zenodo and software catalogues

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.cff1 KB

      SHA-256 13283b08157f9aa4185284587c66dec81aece9e75d2ca6a40564a630aeba9282

Check a file with its SHA-256: shasum -a 256 <file> (macOS, Linux) or Get-FileHash <file> (Windows). Text, tables and figures by Nexus: CC BY 4.0; each source keeps its own licence.

Cite this annex

Valadbaygi, S. (Ed.). (2026). Annex B: Data appendix. In Exponential Technology Report 2026: Additive and Advanced Manufacturing (Baseline Edition 2026, Report No. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE) [Draft under review]. The Global Centre for Risk and Innovation (GCRI).

Every citation form of the whole report, BibTeX and RIS included, is on the edition home. Cite this report

報告書貢献する

Send evidence or a correction on Additive and Advanced Manufacturing.

Reports is the Consortium’s quarterly publication, written by six desks. This page sits with the GCRI Systems Evidence desk. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work. Sent to the wrong desk, it is forwarded, not refused.

GCRI システム・エビデンスデスク指数関数的テクノロジー

CC BY 4.0 Free to read. Text and figures: CC BY 4.0. Data: CC0 1.0. Authors keep copyright. Published by GCRI Canada.