Skip to content

GCRI · مهندسی

مهندسی قابلیت اطمینان و تاب‌آوری

Reliability and resilience engineering studies how systems fail, how failures can be prevented and how systems absorb, adapt and recover from disruption. It addresses both technical components and the organisations that operate them. Critical Infrastructure stewards this page for the Nexus Consortium.

01فضای کار

فضای کار برای مهندسی قابلیت اطمینان و تاب‌آوری.

مدل قابلیت اطمینان

The Global Centre for Risk and Innovation (GCRI) · Reliability and resilience · Run R-3730 · Example interface, not a record

Single point of failureGCRI · GCRI

نمودار وابستگی

گره‌ها: دارایی‌ها · یال‌ها: وابستگی‌ها

حالت‌های شکست

N388118بحرانی
N4531725عادی
N5498414عادی
N6536742عادی

اندازهٔ آبشار در اثر حذف

مدل قابلیت اطمینان.رابط تصویری؛ داده‌های زنده نیست.

GCRI · Reliability model. Reliability model: example names and illustrative values, not a record.

02روش

What reliability and resilience engineering covers.

  1. 01

    روش‌های محوری

    failure modes and effects analysis; fault tree analysis; reliability block diagrams; resilience metrics; maintenance optimisation; post-incident analysis.

  2. 02

    داده‌ها و ابزارها

    failure and maintenance records; incident databases; condition monitoring data; component test data; operator logs.

  3. 03

    اعتبارسنجی

    پیش‌بینی‌های قابلیت اطمینان با داده‌های خرابی میدانی مقایسه می‌شوند. مانورها و بازبینی‌های پس از رویداد بررسی می‌کنند که آیا بازیابی طبق برنامه انجام شده است.

  4. 04

    محدودیت‌ها

    برآورد خطاهای علت مشترک و رویدادهای نادر از دادهٔ محدود دشوار است. عوامل انسانی و سازمانی در برابر کمّی‌سازی مقاومت می‌کنند.

  5. 05

    کاربرد در تصمیم‌های ریسک

    Resilience engineering identifies critical components and recovery bottlenecks across connected systems. It informs redundancy, spares and restoration priorities.

03رویهٔ مرجع

Resilience engineering extends reliability practice to whole systems.

مرجعآنچه تعیین می‌کند
ISO 22301Business continuity management
IEC 60300 dependability managementReliability and availability
Sendai target Dآسیب به زیرساخت‌های حیاتی و اختلال در خدمات پایه
04فرایند

نحوهٔ اجرای فرایند.

Process explorer · Process

Reliability and resilience engineering: Operational resilience

8 گام4 مرحله

فرایند

Reliability and resilience engineering: Operational resilience

Basel defines operational resilience as delivering critical operations through disruption; the UK PRA uses important business services and impact tolerances.

  1. 01 Services and tolerance

    1. 01Important business services or critical operationsDataset · Programme ownerUnder PRA rules a firm identifies its important business services; Basel says critical operations. Resilience delivers them in disruption.
    2. 02Set impact toleranceStep · Programme ownerFor each important business service the firm sets an impact tolerance, the maximum tolerable disruption.
  2. 02 Map and test

    1. 03MappingStep · Programme ownerThe firm documents what it needs to deliver each important business service. Basel asks banks to map interconnections and interdependencies.
    2. 04سناریوهای شدید اما محتملمدل · مالک برنامهسناریوها اختلال‌های شدید اما محتمل‌اند. بازل همه‌گیری‌ها، رخدادهای سایبری، خرابی‌های فناوری و سوانح طبیعی را نام می‌برد.
    3. 05Scenario testingExercise · Programme ownerThe firm regularly tests whether each important business service stays within its impact tolerance in a severe but plausible disruption.
  3. 03 Fix

    1. 06Identify vulnerabilitiesStep · Programme ownerWhere capabilities cannot meet the stated tolerance, policies should address the gap. Basel gives this task to board oversight.
    2. 07Act to remain within toleranceStep · Programme ownerThe firm must ensure it can remain within its impact tolerance for each important business service.
  4. 04 نهاد حاکم

    1. 08Self-assessment and management body approvalDecision · Management bodyThe firm prepares and regularly updates a written self-assessment. Its management body approves the services and the self-assessment.

Outline of an external standard or method, from its public sources. It describes what the framework says, not a record of any run. It does not show that Nexus or any partner performs, certifies or approves a step. A gate is a step of the method, never a Nexus approval. The two vocabularies differ; the outline names both.

05در کار ریسک سامانه‌ای

جذب، سازگاری، بازیابی.

Reliability asks how often a component fails; resilience asks how a system performs during and after disruption. The resilience curve (performance against time through a disruption) makes recovery speed and degraded performance explicit. Interdependent networks need joint restoration planning, because one network’s recovery waits on another’s.

  • Measure recovery time and degraded service, not only failure probability.
  • Plan restoration order across networks.
  • Test assumptions with exercises.
  • Applications on Critical Infrastructure and Energy Nexus.
07تولیت

چه کسی این صفحه را نگهداری می‌کند.

Critical Infrastructure stewards reliability and resilience engineering: it keeps this description current and reviews how the method is applied across the platforms.

08منابع

Where this page’s references lead.

نهادها و اسنادی که این صفحه بر پایهٔ آن‌ها خوانده می‌شود. وضعیت و ویراست‌ها تغییر می‌کنند؛ هر پیوند به نهاد صادرکننده می‌رود.

09پرسش‌ها

پرسش و پاسخ.

چرا یک نهاد میزبان همهٔ صفحه‌های روش است؟
GCRI میزبان STEM Commons است تا هر روش یک توصیف مرجع واحد داشته باشد. سکوها به آن پیوند می‌دهند و آن را تکرار نمی‌کنند؛ این کار یکنواختی تعاریف را حفظ می‌کند.
چگونه اصلاحی را برای صفحهٔ یک روش پیشنهاد کنم؟
نامه بنویسید به فرم نگرانی درستی‌سنجی بنویسید.
گزارش‌هامشارکت

شواهد را از همین صفحه ارسال کنید.

Reports نشریهٔ فصلی کنسرسیوم است. آنچه دربارهٔ این موضوع می‌دانید می‌تواند در ویراست بعدی به شواهد، یک مورد یا یک اصلاح تبدیل شود، به نام شما ثبت شود و در صورتی که کار خود شما باشد تحت CC BY 4.0 منتشر شود.

GCRI
⁨Global Centre for Risk and Innovation⁩

یک روش، یک مجموعه‌داده یا یک پرسش بیاورید.

اطلاعات و درخواست‌ها امروز باز است. هر درخواست یک شمارهٔ پیگیری می‌گیرد و گام بعدی را مشخص می‌کند؛ درخواست‌های عضویت، پرداخت‌ها، تخصیص رایانش و ثبت‌نام‌ها تنها زمانی باز می‌شوند که تیم، شرایط و ظرفیت داوری آن‌ها فراهم باشد.