Skip to content

GCRI · Labs

प्रयोग

लैब is the platform of The Global Centre for Risk and Innovation (GCRI) for interdisciplinary experiments, technical research, methods and supervised innovation challenges. This page lists experiments once each has been authorised: a reviewed protocol, a named principal investigator, the safeguards that apply and a plan for making the result reproducible. No experiment is shown until its record exists. Information and enquiries are open today.

01कार्यक्षेत्र

The workspace for experiments.

Testbed operations

Experiments · Field lab coast · Campaign 5 · Example interface, not a record

Sensors deployedGCRI · Labs

Sensor deployment

उदाहरणात्मक तटरेखा

Buoyकेंद्रGaugeसमुद्रBands: tidal rangeN

Sensors

S-01 tide910.1Nominal
S-04 salinity900.7Recalibrate
S-07 wave910.1Nominal

Sensor vs reference

Testbed operations.दृष्टांत इंटरफ़ेस; लाइव डेटा नहीं।

Labs · Testbed operations. Testbed operations: example names and illustrative values, not a record.

02प्राधिकरण

An experiment is listed only once it is authorised.

प्रोटोकॉल

A reviewed protocol

Question, hypothesis, method, inputs, controls, evaluation and safety, written before any run, as set out under protocols and research design.

ज़िम्मेदारी

A named investigator

The principal investigator, the supervising institution and the reviewers, with their declared conflicts.

रक्षोपाय

Safeguards in force

Ethics review where people are involved, data permissions, site safety and stop conditions.

03पुनरुत्पादनीयता

A completed run is not a valid result.

In the design of the लैब system in Foundry, the protocol and each run are recorded separately: the protocol says what should happen, the run records what actually executed, with the environment, data cut and code version. Reproduction attempts are recorded with their outcome. A run can finish without producing a valid result, and the record says so. See the NXS-LAB (अनुसंधान, प्रयोग और सिमुलेशन) for the technical model.

04वर्तमान स्थिति

No experiment is listed yet.

Experiments appear here once authorised and once their investigators agree to publication. Some experiments are not listed publicly because their data or sites are restricted; their results can still be published on published evidence when released.

स्थितिअर्थ
AuthorisedProtocol reviewed, safeguards in place; runs may start
चल रहा हैRuns under way and recorded
समीक्षाधीनResults being reproduced and independently reviewed
ConcludedResult accepted, rejected or inconclusive, and recorded
StoppedHalted by a stop condition or a safeguard, with reasons
05रक्षोपाय

Safeguards that apply to every experiment.

06प्रश्न

प्रश्न और उत्तर।

Can I propose an experiment?
हाँ। स्रोत, उसके स्वामी और उसकी शर्तों के साथ अनुसंधान सहयोग फ़ॉर्म with a short outline of the question and method. The acknowledgement gives a reference and names the next step. A proposal is not an authorisation.
Who funds experiments?
Each experiment’s record discloses its funding. No funder can influence a result or block its publication.
Are experiments run in Foundry?
Authorised experiments are designed to run in the Labs system of Foundry, inside an authorised project with its own permissions.
What happens if an experiment fails?
A failed or inconclusive experiment is recorded and can be published. Negative results are part of the evidence.
Can an experiment be stopped by someone outside the team?
Yes. Reviewers, the supervising institution and the platform can pause an experiment that breaches its protocol or safeguards. The reasons are recorded.
लैब

कोई विधि, डेटासेट या प्रश्न लाएँ।

जानकारी और पूछताछ आज से खुली हैं। हर पूछताछ को एक संदर्भ मिलता है और अगला कदम बताया जाता है; आवेदन, भुगतान, कंप्यूट आवंटन और पंजीकरण तभी खुलते हैं जब उनकी टीम, शर्तें और समीक्षा क्षमता मौजूद हों।

विधिक

इस साइट पर मानचित्र, डेटा और आँकड़े संदर्भ और सामान्य जानकारी के लिए दिखाए जाते हैं। वे सलाह, पूर्वानुमान या चेतावनियाँ नहीं हैं; जानकारी की सीमाएँ अस्वीकरण और डेटा सूचनाओं में बताई गई हैं।