Skip to content

Draft, not yet released. In stewardship review. Not indexed until the first approved release.

Defence demand outruns part acceptance and supply

A conditional statement under stated assumptions, never a prediction.

2 min read0 figures0 tables2 notesNR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE

Indice dei contenuti
  1. ·Edition home
  2. ·Executive summary
  3. 1Additive manufacturing is production infrastructure that is still being qualified
  4. 2Key findings
  5. 3Systems and sectors at baseline
  6. 4Risks and capability
  7. 5Defence demand outruns part acceptance and supply
    1. 5.1 Assumptions
    2. 5.2 The cascade, step by step
    3. 5.3 The scenario as a table of steps
  8. 6Readings from the other desks
  9. 7The 2027 agenda
  10. 8Systems in depth
  11. AMetodologia
  12. BData appendix
  13. CReferences and record
  14. ·Complete edition, for print

5.1Ipotesi

Scenario SCN-XT13-QAL-01: what is assumed, and what is held constant.

Base di riferimento
the 2026 reference state in this edition
Fattori determinanti
defence and aerospace orders rise faster than qualified powder, standards and skilled operators
Analogues
the 2025 machine-maker failures and the 2024 export rule522
Interventions
none modelled: the specification describes the unmitigated case
Run state
narrative specification; quantified run scheduled for 2027

5.2The cascade, step by step

  1. 1

    GOV → INF

    defence orders pull additive parts into production lines

    2026

  2. 2

    INF → MIN

    demand presses on qualified powder for a few alloys

    2026

  3. 3

    FIN → INF

    a machine maker exits and qualified settings are stranded

    2025

  4. 4

    INF → HLT

    powder handling scales faster than exposure controls

    2025

  5. 5

    TRD → INF

    export controls and national rules diverge

    2024

  6. 6

    GOV → INF

    part acceptance shifts from parts to processes

    2026

5.3The scenario as a table of steps

How the shock in scenario SCN-XT13-QAL-01 would travel through Additive and Advanced Manufacturing’s coupled systems, step by step, under the assumptions the edition states.

PassaggioChe cosa succedeFonte
01 Governance to infrastructureDefence orders pull additive parts into production lines. Analogue or source: 2026.Edition XT-13, scenario SCN-XT13-QAL-01, step 1
02 Infrastructure to mineralsDemand presses on qualified powder for a few alloys. Analogue or source: 2026.Edition XT-13, scenario SCN-XT13-QAL-01, step 2
03 Finance to infrastructureA machine maker exits and qualified settings are stranded. Analogue or source: 2025.Edition XT-13, scenario SCN-XT13-QAL-01, step 3
04 Infrastructure to healthPowder handling scales faster than exposure controls. Analogue or source: 2025.Edition XT-13, scenario SCN-XT13-QAL-01, step 4
05 Trade to infrastructureExport controls and national rules diverge. Analogue or source: 2024.Edition XT-13, scenario SCN-XT13-QAL-01, step 5
06 Governance to infrastructurePart acceptance shifts from parts to processes. Analogue or source: 2026.Edition XT-13, scenario SCN-XT13-QAL-01, step 6

A teaching model of a conditional scenario under the edition’s stated assumptions: not a forecast, not a prediction and not a warning. Sources: Additive and Advanced Manufacturing 2026, scenario SCN-XT13-QAL-01 (2026); Additive and Advanced Manufacturing 2026, references (NR-CIT-1) (2026).

Notes

Numbers are the edition’s reference numbers, so a note reads the same in every chapter. The full list, with every source and its licence, is in Annex C. Annex C, references

  1. 5Nano Dimension Ltd. (ed.), Annual report on Form 10-K for the year ended 31 December 2025 (first 100,000 characters read; Desktop Metal Chapter 11 filing on 28 July 2025; Markforged acquisition closed 25 April 2025; revenue tables not read). Nano Dimension, Waltham. Observation year 2025. Accessed 2026-11-03.back
  2. 223DPrint.com (ed.), US Department of Commerce issues new export controls on metal additive manufacturing (trade article, 18 September 2024; interim final rule; ECCN 2B910; comments due 5 November 2024; author analysis on scope; secondary source, weak evidence). 3DPrint.com, Chicago. Observation year 2024. Accessed 2026-11-03.back

Downloads

Draft, not yet releasedReview copies of a draft in stewardship review. The released edition carries its DOI and replaces them.

  • Stampa

    • PDF, A4

      The designed print edition, A4: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF113 pages1.0 MBTagged, with bookmarks

      SHA-256 9f9c0bdd112c9edd155a42b7deb0eb16a83972daf6aec20f918c9a6922d6a487

    • PDF, US Letter

      The designed print edition, US Letter: cover, imprint and licence, how to cite, contents with page numbers, every chapter, figure, table and annex.

      PDF118 pages1.1 MBTagged, with bookmarks

      SHA-256 c5ba6a27b592bc5d4e5fc9678986c1ea05dc4babaca6d264fe12924a87a0f417

  • Web edition

  • Pacchetto di dati

    • Indicators, CSV

      16 indicators with unit, year, status and source

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.csv1 KB

      SHA-256 ec47045da100257a326321c531b49ec523a5f9c59161000e0c8d1978ca168b69

    • Indicators, JSON

      The same indicators with the edition’s identity and licence

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-indicators.json2 KB

      SHA-256 e578505481cdacf1ca29fcbcad3010be8d9b2541e4721bc2eb8304d90412c885

    • Findings, CSV

      12 findings with status, evidence-quality level and references

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE-findings.csv3 KB

      SHA-256 ac3ad24fc5cc470e585bd6806a983db4c2224f62f35c653e1c9852511e02a925

  • Citation files

    • Citation, BibTeX

      For LaTeX and reference managers

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.bib1 KB

      SHA-256 af46b873e727338fcfbee92dfb1a02521c9d3ab443debfe0dd537fcdb45b0df1

    • Citation, RIS

      For Zotero, EndNote and Mendeley

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.ris1 KB

      SHA-256 8de9cef71c5448dc0b204326d1399f299e681eec8cb4b05fadb79cb6cd0fb600

    • Citation, CITATION.cff

      Citation File Format 1.2.0, for GitHub, Zenodo and software catalogues

      NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE.cff1 KB

      SHA-256 13283b08157f9aa4185284587c66dec81aece9e75d2ca6a40564a630aeba9282

Check a file with its SHA-256: shasum -a 256 <file> (macOS, Linux) or Get-FileHash <file> (Windows). Text, tables and figures by Nexus: CC BY 4.0; each source keeps its own licence.

Cite this chapter

Valadbaygi, S. (Ed.). (2026). Chapter 5: Defence demand outruns part acceptance and supply. In Exponential Technology Report 2026: Additive and Advanced Manufacturing (Baseline Edition 2026, Report No. NR-XTECH-MANUFACTURING-GLOBAL-2026-BASELINE) [Draft under review]. The Global Centre for Risk and Innovation (GCRI).

Every citation form of the whole report, BibTeX and RIS included, is on the edition home. Cite this report

RapportiContribuisci

Send evidence or a correction on Additive and Advanced Manufacturing.

Reports is the Consortium’s quarterly publication, written by six desks. This page sits with the Global Centre for Risk and Innovation (GCRI) Systems Evidence desk. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work. Sent to the wrong desk, it is forwarded, not refused.

Redazione Systems Evidence del GCRITecnologia esponenziale

CC BY 4.0 Free to read. Text and figures: CC BY 4.0. Data: CC0 1.0. Authors keep copyright. Published by GCRI Canada.

Your role here

What you can do from this page.

  • ReaderFound an error? Every correction is public.Corrections log
  • ContributorSend evidence, data or a correction to this desk.Contribute
  • ReviewerReview for this desk; verified reviews are credited.Become a reviewer
  • Editor, steward or boardQueues, decisions and production are in the workspace.My workspace