Skip to content

GCRI · Ticaret ve Stratejik Kaynaklar

Yarı iletkenler ve bileşenler

Semiconductors are made through a long value chain of design, specialised materials, manufacturing equipment, fabrication and assembly, with several steps concentrated in a few firms and places. Shortages can stall vehicles, medical devices and infrastructure. This page sets out how the chip value chain is structured, where it concentrates, how disruptions propagate, and what evidence serves the governments and industries that depend on it.

02Soru

Semiconductors and components: how the risk develops.

Electronics, advanced materials and fabrication inputs. The dossier below sets out how the risk develops, what is measured, where the data come from, how it is modelled and who decides.

Mekanizma

Each step is specialised

Design tools, wafers, speciality gases and chemicals, lithography equipment, fabrication and packaging are each dominated by few suppliers. A bottleneck at any step limits output.

Mekanizma

Fabs take years and vast capital

Leading fabrication plants cost billions and take years to build. Capacity cannot be added quickly when demand changes or supply is disrupted.

Mekanizma

Geography concentrates risk

Advanced fabrication and assembly cluster in a few regions exposed to earthquakes, drought, power outages and geopolitical tension.

Mekanizma

Shortages hit downstream industries

Products need many chips, including mature, low-cost ones. A kesintisine of a single component can halt production lines far from where chips are made.

03İzleme

Supplier tier map.

Bir ekibin bu konuyu izlemek için kullanacağı ekran: ölçütleri, durumları ve kararları. Adlar örnektir ve değerler açıklayıcıdır.

Supplier tier map

Semiconductors and components · Assembly cluster · Bill of materials BOM-059

Single source at tier 3GCRI · Ticaret ve Stratejik Kaynaklar

Tier mapping

  1. Kademe 112 suppliers
  2. Kademe 247
  3. Kademe 383
  4. Raw materials5

Konsantrasyon

Rare earth magnet704002None qualifiedYüksek
Gallium614836Recycling pilotYüksek
Copper wire401196Two qualifiedDüşük
Lithium cells522554One qualifiedOrta

Mitigation

Dual source
qualification 11 months
Buffer stock
9 weeks
Design change
substitution study
Sahip
Tedarik sorumlusu
Supplier tier map: the screen’s structure, terms and states for Semiconductors and components.Örnek adlar ve örnekleyici değerler; bir tasarımdır, kayıt veya canlı bir sistem değildir.
04Alanlar genelinde

Chips sit inside the control systems of every domain.

Component supply studies are designed for the Stratejik Sistemler serisini. The European Chips Act (2023) is one of several national and regional responses to concentration in fabrication; the page names no firm.

05Yöntemler ve kanıt

How semiconductors and components is modelled, measured and tested.

Model, varsayımları, verileri ve belirsizliği, bir bilim insanının veya mühendisin kontrol edeceği biçimde. Yapılar yayımlanmış yöntemleri izler. Çizilen değerler bulgu değil, açıklayıcıdır.

Sistem modeli

The couplings between the systems in semiconductors and components: signs of influence, a reinforcing and a balancing loop, and cross-links where stress jumps.

++−+TicaretSanayiTopluluklarEkonomiR pekiştiriciB dengeleyici
Causal loop diagram from the page’s systems; signs show the direction of influence. Illustrative structure for a system dynamics or network model, not estimated couplings.
FAIR yol gösterici ilkeleri · GO FAIR ve FORCE11W3C PROV · World Wide Web ConsortiumBelirsizliklerin tutarlı ele alınmasına ilişkin kılavuz · IPCCCEOS Analysis Ready Data · Yer Gözlem Uyduları Komitesi
06Göstergeler

Neyin ve ne kadar iyi ölçüldüğü.

Her gösterge birimini, sıklığını, ardındaki kaynak türünü ve bir değerin taşıyacağı kanıt etiketini taşır. Hiçbir değer gösterilmez: değerleri bir program kendi yetkisi altında sağlar.

GöstergeBirimSıklıkKaynak türüEtiket
Share of fabrication capacity by regionpercent of wafer capacityyıllıkIndustry analysesTAHMİNİ
Chip trade by product codevalue of trade in integrated circuitsyıllıkTicaret istatistikleriYayımlanmış istatistikler
Supplier concentration in key inputsnumber of suppliers with significant sharedeğerlendirme başınaValue chain studiesTAHMİNİ
Önceden uyarı süresi for chip ordershaftaaylıkIndustry surveysBİLDİRİLMİŞ
Export control measures on semiconductorsönlem sayısıdeğişiklik başınaGovernment noticesYayımlanmış istatistikler
Fabs exposed to natural hazardscount by hazard zonedeğerlendirme başınaSite and hazard overlayTAHMİNİ
07Kaynaklar

Kanıtın nereden geldiği.

Her biri lisans sınıfıyla birlikte, adı belirtilmiş kamuya açık veri kümeleri ve kurumsal kayıtlar. Anlaşmaya dayalı kaynaklar yalnızca koşullarına göre kullanılır ve asla yeniden yayımlanmaz.

KaynakSağladıklarıLisans sınıfı
UN Comtrade (HS headings 8541 and 8542)Trade in semiconductor devices and integrated circuitsFree access with limits, UN terms
OECD studies of the semiconductor value chainStructure, concentration and policy analysisPublic, OECD terms
WSTS public summariesIndustry sales by region and product categoryPublic summaries; full data members only
Government export control noticesRules restricting trade in chips and equipmentPublic records, licence per government
Academic and think-tank value chain mappingsSupplier shares at each stepLicence per publication (to check)
08Kararlar

Kim karar verir ve kanıt neye hizmet eder.

Trade and Strategic Resources prepares evidence. The decisions below are taken by the authorities named, under their own rules, and never by the platform.

Kim karar verirSoruBu sayfanın hizmet ettiği kanıt
Ministries of industry and technologyWhich value chain steps to support domestically or with partnersValue chain maps; concentration evidence
Critical sector operatorsWhich components to stockpile or qualify from second sourcesDownstream dependency analyses
Trade and security authoritiesHow export controls affect domestic supplyExport control evidence; trade data

Bu konunun ürettiği çıktılar

  • Value chain maps showing concentration at each step
  • Hazard exposure overlays for fabrication sites
  • Downstream dependency analyses for critical sectors
  • Evidence notes on export control changes
09Temel sorular

What experts ask about semiconductor supply.

  • At which stages of the chain is capability concentrated in few firms or locations?
  • Which specialised inputs, such as high-purity gases, chemicals and wafers, are single-sourced?
  • How long would it take to replace lost fabrication capacity?
  • Which downstream sectors are most exposed to shortages of mature or advanced chips?
  • How do export controls and industrial policies change the structure of the chain?
10Mekanizmalar ve etkenler

Why the chain is fragile.

Semiconductor manufacturing requires extreme precision, very large capital investment and accumulated know-how. Leading-edge fabrication plants take years to build and need specialised equipment from a handful of suppliers. These barriers favour concentration: each stage tends to have few capable players, and the stages are spread across different regions.

Shortages propagate widely because chips are embedded in so many products. Even inexpensive, mature-node chips can halt the production of much more valuable goods when they are missing. Long lead times and the difficulty of switching suppliers, since chips must be qualified for each product, slow recovery.

Other components share similar features: specialised capacitors, displays, sensors and advanced materials often depend on few producers and on inputs such as rare gases or high-purity minerals.

11Yöntemler ve veriler

Yöntemler ve sınırları.

  1. 01

    Supply chain mapping

    Tracing firms and locations at each production stage. Commercial confidentiality limits visibility beyond the first tiers.

  2. 02

    Ağ analizi

    Identifying central nodes and single points of failure using ağ bilimi. Firm-level links are often incomplete.

  3. 03

    Materials and process research

    Understanding critical inputs and alternatives using materials science and chemistry.

  4. 04

    Girdi-çıktı analizi

    Estimating sector exposure to component shortages. Tables are aggregated and published with delay.

The industry changes quickly, and analyses state the date and sources of the information used.

12Yöntemler

Nasıl incelendiği ve yöntemlerin söyleyemeyecekleri.

13Where this page’s references

Where this page’s references lead.

Bu sayfanın karşılaştırıldığı kuruluşlar ve belgeler. Durumlar ve sürümler değişir; her bağlantı yayımlayan kuruluşa gider.

14Sorular

Sorular ve yanıtlar.

Why are semiconductor supply chains fragile?
Because several steps, from equipment to advanced fabrication, are concentrated in few firms and locations, capacity takes years to build, and products depend on many chips.
What is a fab?
A semiconductor fabrication plant, where chips are manufactured on silicon wafers under strict clean-room conditions.
Do mature chips matter?
Yes. Many vehicles, appliances and industrial systems rely on older, low-cost chips, and shortages of these can halt production as much as advanced chips.
Does the platform assess individual chip makers?
No. It studies the structure of the industry and its exposures with transparent methods, not individual firms.
Are export controls analysed?
Their effects on supply structure are analysed in neutral terms. The platform does not advise on compliance.
Why do mature chips matter?
Because many essential products use them, and their shortage can stop production as effectively as a shortage of advanced chips.
RaporlarKatkıda bulunun

Bu sayfadan kanıt katkısında bulunun.

Raporlar is the Consortium’s quarterly publication. What you know about this subject can become evidence, a case or a correction in the next edition, credited to you and published under CC BY 4.0 where it is your own work.

GCRITicaret ve Stratejik KaynaklarStratejik SistemlerSenaryo ve Stres Testi
Ticaret ve Stratejik Kaynaklar

Bir yöntem, bir veri seti ya da bir soru getirin.

Bilgi ve başvurular bugün açıktır. Bir başvuru bir referans numarası alır ve bir sonraki adımı belirtir; başvurular, ödemeler, işlem kapasitesi tahsisleri ve kayıtlar yalnızca ekipleri, koşulları ve inceleme kapasiteleri mevcut olduğunda açılır.